Armadeus APF boards

From eLinux.org
Jump to: navigation, search

APF boards are Systems On Module designed to be embeeded into projects needing performances, low power and versatility. Initiated by a group of embedded systems enthusiasts as a proof of concept (ARM+FPGA combination), boards are now designed, sold and supported by the ARMadeus Systems company.

Open Source Buildroot's based BSP is maintained by ARMadeus Systems itself and boards are used by the growing Armadeus Project Community.

FPGA's IP designed for the boards support OpenCores Wishbone bus.

APF6 (i.MX6 based)

scale
The APF6 is a reduced size processor board fitted with a solo/dual/quad core(s) @1GHz i.MX6 processor, 512 MB to 2 GB DDR3 RAM (32 bits), 2 to 64 GB eMMC, a Gigabit Ethernet port, optional Wi-Fi b/g/n and Bluetooth 4.0 and (for the APF6_SP version) a Cyclone V GX FPGA from Altera with dedicated DDR, it is easily integrated into an embedded system thanks to its onboard PHYs (Ethernet & USB).
Click here for official APF6 site

APF51 (i.MX51 based)

scale
The APF51 is a reduced size processor board fitted with a 800MHz i.MX51 processor, 64 MB to 512 MB LPDDR RAM (32 bits), 256 MB to 32 GB FLASH (NAND SLC), a 10/100Mbits Ethernet port and a Xilinx Spartan 6A FPGA, it is easily integrated into an embedded system thanks notably to its PMIC and on board PHYs (Ethernet & USB).
Click here for official APF51 site

APF27 (i.MX27 based)

scale
The APF27 is a reduced size processor board fitted with a 400MHz i.MX27 processor, 64 MB to 256 MB DDR mobile RAM (32 bits), 256 MB to 512 MB FLASH (NAND 16 bits), a 10/100Mbits Ethernet port and a Xilinx (200K gate) Spartan 3A FPGA, it is easily integrated into an embedded system thanks notably to its regulators and level converters (RS232/USB).
Click here for official APF27 site

APF9328 (i.MXL based)

scale
The APF9328 is a reduced size processor board fitted with a 200MHz i.MXL processor, 8 to 32MB SDRAM, 8 to 16MB FLASH (NOR), a 10/100Mbits Ethernet port and a Xilinx (200K gate) Spartan 3 FPGA. It is easily integrable into an embedded system thanks notably to its regulators and level converters (RS232/USB).
This board is no more recommended for new projects.