CircuitCo:CAN Bus Cape RevA
The BeagleBone CANBus Cape makes use of DCAN1 interface of the AM335x processor to provide a Controller Area Network (CAN) interface that meets the specifications of ISO11898. The CAN Bus interface can be accessed via a standard D-Sub 9 female serial connector. This connector is located to the side so it doesn't interfere with any capes stacked above it. The BeagleBone CANBus Cape also supports SocketCAN.
- There is a hardware bug on the CANBus, where the buffer U27 blocks the TX signal coming from BeagleBone. One workaround for the issue is to remove the buffer and short pin 2 and 4 of U27. Please request an RMA for your board if you are not comfortable with the solder job. Rework will be done at no cost.
- BeagleBone CANBus Cape revision A1 is supported by Angstrom release 06-18-12 or later.
- Major BeagleBone image releases can be downloaded here.
- Intermediate BeagleBone image releases can be downloaded here
Please follow the instructions here to write the image file to your SD card on a Windows machine.
|Compatible Serial Ports||UART1|
|Power||3.3V via expansion header|
|Connectors||Two 46-position connectors|
|One 10-position connector|
|One D-Sub9 serial connector|
|Size||3.40" x 2.45"|
The BeagleBone CANBus Cape uses 7 signals including:
|Board Name||BeagleBone CANBus Cape|
- Boardzoo (USA)
- Arrow Electronics (US)
- Digi-Key (USA)
- Mouser Electronics (USA)
- Special Computing (USA)
- Tigal (Austria)
System Reference Manual
BeagleBone CANBus Revision A1
To download all files at once please click here
To go back to the cape list, please click here