Device-tree documentation project
- Device-tree documentation project
- Tim Bird, Sony Mobile
- Selected to be sponsored by the CE Workgroup
The "Device Tree" is a relatively new (for ARM Linux) framework for specifying the hardware configuration of a board to the Linux Kernel. See the Device Tree page for more details.
New device drivers for many embedded products are always being produced, and it is strongly encouraged that new drivers and the board support for new ARM boards use device tree as part of their driver configuration. However, some areas of the device tree bindings are non-uniform and not well-documented.
This project would consist of documenting aspects of the device tree system that would be useful for:
- board support developers (board/platform developers)
- device driver developers
- kernel sub-system maintainers
Kernel sub-system maintainers would be well-served by a document describing "rules", guidelines and best practices for device tree bindings.
Many documents exist which describe the syntax of the device tree, (such as the epar document, the device-tree wiki and the usage document in the kernel Documentation directory). However, some details are missing from these documents, and in some cases the explicit practices for working with device tree in the Linux kernel are different or have evolved from when these original documents were written.
The output from this effort would be a readily-accessible document. It would probably make sense to put the document in the kernel source tree, under Documentation/devicetree. Failing that, the document could be placed on the elinux wiki or the device tree wiki.
Some areas of device tree bindings (and driver infrastructure) are in flux (e.g. pinctrl, dma). Would it be better to wait until these areas have settled down?
Does throwing money at this project dis-incent volunteer effort?
- https://www.power.org/documentation/power-org-standard-for-embedded-power-architecture-platform-requirements-epapr-v1-1-2/ - open-firmware device tree specification
- Some 2013 kernel summit discussion entries:
- Jonathan Corbet asks about the need for discussion and/or a document on device tree
- Greg KH would like a document
- Stephen Warren recommends a reviewer's checklist for new bindings
- Olof Johansson announces ARM kernel summit, with device tree as a possible focus
Current device-tree documentation
The page BeagleBone and the 3.8 Kernel describes the issues of moving to devicetree for the BeagleBone, and gives an excellent overview of devicetree, the structure changes required for moving platform and driver support to it, and how BeagleBone board support moved to it.
Some questions to answer
Here are some possible questions that this documentation could address: (If these are already answered by the epar document, please cite the section:)
1. What is a phandle? How is it used? What rules are there for defining them? For referencing them?
2. How are #foo-cells used?
3. What are the rules for naming attributes? when should vendor qualifiers be used and when not?
4. How does device-tree interact with device instantiation - when is the device node created?, who creates it, when is the initcall called? when is the probe function called?
5. How does device-tree interact with platform/bus instantiation? Do buses instantiate their children device nodes, or does the probe routine do this?
6. what is the kernel API for interacting with device-tree? What things are parsed automatically, vs. require manual (coded) parsing?
A rough guess of the amount of work required for this document is approximately 3 months (12 person-weeks).
- Frank Rowand (device tree maintainer)
- Jonathan Corbet (output could also be part of LDD4??)
- Thomas Petazzoni - is presenting a tutorial on device tree at ELCE
- Pantelis Antoniou - who wrote: BeagleBone and the 3.8 Kernel
- one of the device-tree maintainers? (Grant, Stephen, Mark, etc.)