Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Printk Times Sample4

From eLinux.org
Jump to: navigation, search
OS-e820: 0000000007ff0000 - 0000000008000000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[4294667.296000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[4294667.296000] 127MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 32560
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
[4294667.296000]   Normal zone: 28464 pages, LIFO batch:6
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f6240
[4294667.296000] ACPI: RSDT (v001 INTEL  D865PERL 0x20030828 MSFT 0x00000097) @ 0x07f30000
[4294667.296000] ACPI: FADT (v002 INTEL  D865PERL 0x20030828 MSFT 0x00000097) @ 0x07f30200
[4294667.296000] ACPI: MADT (v001 INTEL  D865PERL 0x20030828 MSFT 0x00000097) @ 0x07f30300
[4294667.296000] ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x07f34620
[4294667.296000] ACPI: WDDT (v001 INTEL  OEMWDDT  0x00000001 MSFT 0x0100000d) @ 0x07f346b9
[4294667.296000] ACPI: DSDT (v001 INTEL  D865PERL 0x00000006 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: ro root=/dev/nfs ip=dhcp hdc=ide-scsi console=vga console=ttyS0,115200
[4294667.296000] ide_setup: hdc=ide-scsi
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 512 (order: 9, 8192 bytes)
[    0.000000] Detected 1995.620 MHz processor.
[   21.397369] Using tsc for high-res timesource
[   21.399820] Console: colour VGA+ 80x25
[   21.537244] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.544547] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[   21.555066] Memory: 125076k/130240k available (2002k kernel code, 4556k reserved, 1006k data, 140k init, 0k highmem)
[   21.565775] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.574089] Calibrating delay loop... 3940.35 BogoMIPS (lpj=1970176)
[   21.596511] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[   21.603263] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[   21.603276] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[   21.603287] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   21.608884] CPU: L2 cache: 128K
[   21.612163] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[   21.612171] Intel machine check architecture supported.
[   21.617614] Intel machine check reporting enabled on CPU#0.
[   21.623419] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[   21.629674] CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
[   21.635616] Enabling fast FPU save and restore... done.
[   21.641327] Enabling unmasked SIMD FPU exception support... done.
[   21.647694] Checking 'hlt' instruction... OK.
[   21.672303] ACPI: setting ELCR to 0200 (from 0e28)
[   21.678095] NET: Registered protocol family 16
[   21.683775] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[   21.690415] PCI: Using configuration type 1
[   21.694782] mtrr: v2.0 (20020519)
[   21.698569] ACPI: Subsystem revision 20050125
[   21.712870]     ACPI-1138: *** Error: Method execution failed [\MCTH] (Node c7f2ec80), AE_AML_BUFFER_LIMIT
[   21.723005]     ACPI-1138: *** Error: Method execution failed [\OSFL] (Node c7f2e480), AE_AML_BUFFER_LIMIT
[   21.733159]     ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2K._STA] (Node c7e29f00), AE_AML_BUFFER_LIMIT
[   21.745385]     ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2K._STA] (Node c7e29f00), AE_AML_BUFFER_LIMIT
[   21.757677]     ACPI-1138: *** Error: Method execution failed [\MCTH] (Node c7f2ec80), AE_AML_BUFFER_LIMIT
[   21.767834]     ACPI-1138: *** Error: Method execution failed [\OSFL] (Node c7f2e480), AE_AML_BUFFER_LIMIT
[   21.777990]     ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (Node c7e29e60), AE_AML_BUFFER_LIMIT
[   21.790158]     ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (Node c7e29e60), AE_AML_BUFFER_LIMIT
[   21.804885] ACPI: Interpreter enabled
[   21.808713] ACPI: Using PIC for interrupt routing
[   21.814251] ACPI: PCI Root Bridge [PCI0] (00:00)
[   21.819081] PCI: Probing PCI hardware (bus 00)
[   21.824418] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[   21.831217] PCI: Transparent bridge - 0000:00:1e.0
[   21.837245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.837611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   21.838792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   21.843383]     ACPI-1138: *** Error: Method execution failed [\MCTH] (Node c7f2ec80), AE_AML_BUFFER_LIMIT
[   21.853813]     ACPI-1138: *** Error: Method execution failed [\OSFL] (Node c7f2e480), AE_AML_BUFFER_LIMIT
[   21.863936]     ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2K._STA] (Node c7e29f00), AE_AML_BUFFER_LIMIT
[   21.876219]     ACPI-1138: *** Error: Method execution failed [\MCTH] (Node c7f2ec80), AE_AML_BUFFER_LIMIT
[   21.886359]     ACPI-1138: *** Error: Method execution failed [\OSFL] (Node c7f2e480), AE_AML_BUFFER_LIMIT
[   21.896741]     ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (Node c7e29e60), AE_AML_BUFFER_LIMIT
[   21.911374] ACPI: Power Resource [URP1] (off)
[   21.916100] ACPI: Power Resource [FDDP] (off)
[   21.920810] ACPI: Power Resource [LPTP] (off)
[   21.926848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   21.935248] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[   21.943636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   21.952005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   21.960407] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   21.968792] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.978388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.987971] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   21.996756] SCSI subsystem initialized
[   22.001066] usbcore: registered new driver usbfs
[   22.005935] usbcore: registered new driver hub
[   22.010673] PCI: Using ACPI for IRQ routing
[   22.015051] ** PCI interrupts are no longer routed automatically.  If this
[   22.022224] ** causes a device to stop working, it is probably because the
[   22.029395] ** driver failed to call pci_enable_device().  As a temporary
[   22.036476] ** workaround, the "pci=routeirq" argument restores the old
[   22.043376] ** behavior.  If this argument makes the device work again,
[   22.050453] ** please email the output of "lspci" to bjorn.helgaas@hp.com
[   22.057532] ** so I can fix the driver.
[   22.067584]     ACPI-1138: *** Error: Method execution failed [\MCTH] (Node c7f2ec80), AE_AML_BUFFER_LIMIT
[   22.077735]     ACPI-1138: *** Error: Method execution failed [\OSFL] (Node c7f2e480), AE_AML_BUFFER_LIMIT
[   22.087880]     ACPI-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c7e27c80), AE_AML_BUFFER_LIMIT
[   22.098960]     ACPI-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c7e27c80), AE_AML_BUFFER_LIMIT
[   22.111472] Machine check exception polling timer started.
[   22.118406] Initializing Cryptographic API
[   22.122808] ACPI: Power Button (FF) [PWRF]
[   22.127346] ACPI: Sleep Button (CM) [SLPB]
[   22.131835] ACPI: Processor [CPU1] (supports 8 throttling states)
[   22.141310] Real Time Clock Driver v1.12
[   22.145573] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
[   22.154116] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.160399] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
[   22.166314] PCI: setting IRQ 3 as level-triggered
[   22.171226] ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 3 (level, low) -> IRQ 3
[   22.178903] ttyS4 at I/O 0xbc00 (irq = 3) is a 16550A
[   22.184382] ttyS5 at I/O 0xb400 (irq = 3) is a 16550A
[   22.189854] ttyS6 at I/O 0xb000 (irq = 3) is a 16550A
[   22.195324] ttyS7 at I/O 0xac00 (irq = 3) is a 16550A
[   22.200782] ttyS1 at I/O 0xa800 (irq = 3) is a 16450
[   22.206095] io scheduler noop registered
[   22.210227] io scheduler anticipatory registered
[   22.215057] io scheduler deadline registered
[   22.219543] io scheduler cfq registered
[   22.223848] loop: loaded (max 8 devices)
[   22.227952] e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
[   22.234232] e100: Copyright(c) 1999-2004 Intel Corporation
[   22.240517] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[   22.246431] PCI: setting IRQ 5 as level-triggered
[   22.251337] ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 5 (level, low) -> IRQ 5
[   22.282220] e100: eth0: e100_probe: addr 0xfeafd000, irq 5, MAC addr 00:0C:F1:AA:CB:59
[   22.290574] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   22.297210] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   22.305942] ICH5: IDE controller at PCI slot 0000:00:1f.1
[   22.311578] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   22.317996] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   22.323994] PCI: setting IRQ 11 as level-triggered
[   22.328997] ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
[   22.336739] ICH5: chipset revision 2
[   22.340463] ICH5: not 100% native mode: will probe irqs later
[   22.346436]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[   22.353983]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
[   22.361719] Probing IDE interface ide0...
[   22.624921] hda: Maxtor 94098U8, ATA DISK drive
[   23.240581] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   23.245435] Probing IDE interface ide1...
[   24.171831] hdd: CRD-8482B, ATAPI CD/DVD-ROM drive
[   24.227653] hdd: Disabling (U)DMA for CRD-8482B (blacklisted)
[   24.233696] ide1 at 0x170-0x177,0x376 on irq 15
[   24.238664] Probing IDE interface ide2...
[   24.751255] Probing IDE interface ide3...
[   25.262895] Probing IDE interface ide4...
[   25.774533] Probing IDE interface ide5...
[   26.286196] hda: max request size: 128KiB
[   26.292107] hda: 80041248 sectors (40981 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[   26.300515] hda: cache flushes not supported
[   26.300614]  hda: hda1 hda2 hda3 hda4
[   26.312215] ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
[   26.321406] scsi0 : SCSI host adapter emulation for IDE ATAPI devices
[   26.328475]   Vendor: LG        Model: CD-ROM CRD-8482B  Rev: 1.05
[   26.335183]   Type:   CD-ROM                             ANSI SCSI revision: 02
[   26.343189] Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
[   26.351585] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[   26.357591] PCI: setting IRQ 10 as level-triggered
[   26.362593] ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
[   26.370342] ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
[   26.379066] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   26.379077] ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xfebffc00
[   26.385174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   26.396775] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   26.396786] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[   26.405128] hub 1-0:1.0: USB hub found
[   26.409062] hub 1-0:1.0: 8 ports detected
[   26.434143] USB Universal Host Controller Interface driver v2.2
[   26.440883] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[   26.446991] PCI: setting IRQ 9 as level-triggered
[   26.452144] ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9
[   26.459708] uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
[   26.529004] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   26.529016] uhci_hcd 0000:00:1d.0: irq 9, io base 0xcc00
[   26.534631] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   26.542544] hub 2-0:1.0: USB hub found
[   26.546499] hub 2-0:1.0: 2 ports detected
[   26.553479] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[   26.559395] ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
[   26.566942] uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
[   26.635929] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   26.635941] uhci_hcd 0000:00:1d.1: irq 5, io base 0xd000
[   26.641566] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   26.649493] hub 3-0:1.0: USB hub found
[   26.653428] hub 3-0:1.0: 2 ports detected
[   26.659943] ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
[   26.667660] uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
[   26.753844] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   26.753856] uhci_hcd 0000:00:1d.2: irq 11, io base 0xd400
[   26.759561] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   26.767461] hub 4-0:1.0: USB hub found
[   26.771397] hub 4-0:1.0: 2 ports detected
[   26.784851] ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 9 (level, low) -> IRQ 9
[   26.796358] uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
[   26.846785] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   26.865768] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   26.865776] uhci_hcd 0000:00:1d.3: irq 9, io base 0xd800
[   26.871412] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   26.879367] hub 5-0:1.0: USB hub found
[   26.883329] hub 5-0:1.0: 2 ports detected
[   26.946813] Initializing USB Mass Storage driver...
[   27.015154] hub 2-2:1.0: USB hub found
[   27.021080] hub 2-2:1.0: 3 ports detected
[   27.050722] usbcore: registered new driver usb-storage
[   27.056108] USB Mass Storage support registered.
[   27.061011] mice: PS/2 mouse device common for all mice
[   27.066644] NET: Registered protocol family 2
[   27.079679] IP: routing cache hash table of 512 buckets, 4Kbytes
[   27.086068] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   27.093455] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   27.100169] TCP: Hash tables configured (established 8192 bind 8192)
[   27.106851] NET: Registered protocol family 1
[   27.111425] NET: Registered protocol family 17
[   27.116191] PM: Reading swsusp image.
[   27.116196] PM: Resume from disk failed.
[   27.116220] ACPI wakeup devices: 
[   27.119702] TANA P0P3 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 SLPB 
[   27.125967] ACPI: (supports S0 S1 S4 S5)
[   27.220937] usb 2-2.3: new full speed USB device using uhci_hcd and address 3
[   27.642320] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   28.641513] Sending DHCP requests ., OK
[   28.649508] IP-Config: Got DHCP answer from 192.168.1.10, my address is 192.168.1.14
[   28.657748] IP-Config: Complete:
[   28.660943]       device=eth0, addr=192.168.1.14, mask=255.255.255.0, gw=192.168.1.1,
[   28.669078]      host=nut, domain=, nis-domain=(none),
[   28.674457]      bootserver=192.168.1.10, rootserver=192.168.1.10, rootpath=/target/nut
[   28.683166] Looking up port of RPC 100003/2 on 192.168.1.10
[   28.689865] Looking up port of RPC 100005/1 on 192.168.1.10
[   28.699000] VFS: Mounted root (nfs filesystem) readonly.
[   28.704709] Freeing unused kernel memory: 140k freed