[ 8.090000] gp_tp driver suspend(0) [ 8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A] [ 8.090000] [lcd_suspend:311] [ 8.090000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT] [ 8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C] [ 8.090000] Nand app driver suspend! [ 8.090000] **** Suppose to disable Nand/BCH clock here!! [ 8.100000] dram save 4196 pages [ 8.100000] maxarea 0x005a0000(0x00660000) lowmem_maxarea 0x005a0000(0x00660000) [ 8.100000] zonetbl 2 exttbl 3 dramtbl 77 [ 8.100000] GPL32900 system timer init, PCLK(arm_apb)[90000000]Prescaler[89]LDR[10000] [ 8.100000] Nand app driver resume! [ 8.100000] clk_sys_ahb_freq[160000000] [ 8.100000] Nand MainID:0xda98 [ 8.100000] Nand VendorID:0x14761590 [ 8.100000] Nand MainID:0xda98 [ 8.100000] Nand VendorID:0x14761590 [ 8.100000] ==Scan Nand Pad OK!!== [ 8.100000] Main ID:0xda98 [ 8.100000] Vendor ID:0x14761590 [ 8.100000] nand_info.btldr_page_size: 0x800 [ 8.100000] nand_info.bthdr_page_size: 0x400 [ 8.100000] nand_info.block_size: 0x40 [ 8.100000] nand_info.bthdr_bch: 0x0 [ 8.100000] nand_info.btldr_bch: 0x3 [ 8.100000] nand_info.addr_cycle: 0x5 [ 8.100000] nand_info.NoFSSize: 0x0 [ 8.100000] nand_info.total_MB_size: 0x100 [ 8.100000] <<<<<<-----=== BootHeader Config Information! ====----->>>>> [ 8.100000] ECC threshold bit numer: 0xd [ 8.100000] gSTNandConfigInfo.uiAppStart: 0x2 [ 8.100000] gSTNandConfigInfo.uiAppSize: 0x100 [ 8.100000] gSTNandConfigInfo.uiAppSparePercent: 0x8 [ 8.100000] gSTNandConfigInfo.uiDataStart: 0x122 [ 8.100000] gSTNandConfigInfo.uiNoFSAreaSize: 0x0 [ 8.100000] gSTNandConfigInfo.uiBankSize: 0x200 [ 8.100000] gSTNandConfigInfo.uiBankRecSize: 0x40 [ 8.100000] gSTNandConfigInfo.uiPartitionNum: 0x0 [ 8.100000] <<<<<<-----=== Get Config Information End! ====----->>>>> [ 8.100000] gSTNandAppHalInfo.wPageSize: 0x800 [ 8.100000] gSTNandAppHalInfo.wBlkPageNum: 0x40 [ 8.100000] gSTNandAppHalInfo.wNandBlockNum: 0x800 [ 8.100000] gSTNandAppCfgInfo.uiAppStart: 0x2 [ 8.100000] gSTNandAppCfgInfo.uiAppSize: 0x100 [ 8.100000] gSTNandAppCfgInfo.uiAppSpareStart: 0x102 [ 8.100000] gSTNandAppCfgInfo.uiAppSparePercent: 0x8 [ 8.100000] gSTNandAppCfgInfo.uiAppSpareSize: 0x20 [ 8.100000] gSTNandAppCfgInfo.uiAppSpareEnd: 0x122 [ 8.100000] ------- APP initial succeed!! --------- [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C] [ 8.100000] [auo_a043fl01_resume_init][283] LCD CLOCK=9000000 Hz [ 8.100000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT] [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A] [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A] [ 8.100000] gp_tp driver resume(0) [ 8.110000] Restarting tasks ... done. - server format:[ 8.340000] I2S = 0x10c424 sample rate = 48000 Hz initializing... InnoLogo: RTC Alarm Time Second = 0 InnoLogo: headphone = 0 IOCtrl: devmem 0x9301F038 32 0x0000037F InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo: headphone = 0 InnoLogo Result: 0 =============================== ===== Snapshot End ====== =============================== ======================================= Reload nand unnecessary! ======================================= ======================================= Remount system.bin MTD block device found! System.bin mount on /dev/mtdblock1 ======================================= --- +++++++++++++++++++++++++++++++++++++++++++ ++ _Run_Once +++++++++++++++++++++++++++++++++++++++++++ SB_LOCATION=NAND SDCARD_PATH is: /vp_mnt/sd [ 11.070000] ###watchdog_init### [ 11.090000] input: gp-keys as /devices/platform/gp-keys/input/input1 [ 11.550000] [SPEAKER 27] [ 11.690000] gsensor kxtf9 probe ok(need_rotate=1) 0 [ 12.020000] UBI: attaching mtd3 to ubi3 [ 12.020000] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 12.030000] UBI: logical eraseblock size: 126976 bytes [ 12.030000] UBI: smallest flash I/O unit: 2048 [ 12.040000] UBI: VID header offset: 2048 (aligned 2048) [ 12.050000] UBI: data offset: 4096 [ 12.270000] UBI: attached mtd3 to ubi3 [ 12.270000] UBI: MTD device name: "Inno_I_Storage0" [ 12.290000] UBI: MTD device size: 16 MiB [ 12.300000] UBI: number of good PEBs: 128 [ 12.310000] UBI: number of bad PEBs: 0 [ 12.320000] UBI: max. allowed volumes: 128 [ 12.320000] UBI: wear-leveling threshold: 4096 [ 12.330000] UBI: number of internal volumes: 1 [ 12.330000] UBI: number of user volumes: 1 [ 12.330000] UBI: available PEBs: 0 [ 12.340000] UBI: total number of reserved PEBs: 128 [ 12.350000] UBI: number of PEBs reserved for bad PEB handling: 2 [ 12.350000] UBI: max/mean erase counter: 2/1 [ 12.360000] UBI: image sequence number: 0 [ 12.360000] UBI: background thread "ubi_bgt3d" started, PID 227 UBI device number 3, total 128 LEBs (16252928 bytes, 15.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [ 12.450000] UBIFS: recovery needed [ 12.510000] UBIFS: recovery completed [ 12.510000] UBIFS: mounted UBI device 3, volume 0, name "ubi_on_mtd3" [ 12.520000] UBIFS: file system size: 14348288 bytes (14012 KiB, 13 MiB, 113 LEBs) [ 12.530000] UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs) [ 12.540000] UBIFS: media format: w4/r0 (latest is w4/r0) [ 12.540000] UBIFS: default compressor: lzo [ 12.550000] UBIFS: reserved for root: 677704 bytes (661 KiB) [ 12.810000] MTD for InnoTab reaches here: end_mark_found() - 266 [ 12.810000] mtdblock_open() - 331: bbt_found[1] Bundle title mounted successfully! /vp_mnt/if/PROFILE.SET: profile file is corrupted, remove this file... TouchCalibrate[NAND] [ 13.370000] Open Function !! [ 13.370000] PartInfo->partNumber = 0xc,Had Partition Header!! Get poin[ 13.420000] app_dev_release enter!! tercal values successfully! -32876 0 32180049 121 20095 -1073478 65536 TouchCalibrate: Already calibrated.! [ 13.530000] Open Function !! Open /dev/gsensor (2 times) fail! Open /dev/gsensor (3 times) fail! Open /dev/gsensor (4 times) fail! Open /dev/gsensor (5 times) fail! Open /dev/gsensor (6 times) fail! Open /dev/gsenso[ 14.190000] PartInfo->partNumber = 0xd,Had Partition Header!! r (7 times) fail! [ 14.190000] [GSENSOR_DRV] Set gsensor cal data! deltaX: 53, deltaY: -42, deltaZ: -62 Get gsensorcal values successfully! <==[ 14.210000] app_dev_release enter!! ==========gsensorcal values============> deltaX: 53 deltaY: -42 deltaZ: -62 <============successed read nand data============> No SD card! Please press Enter to activate this console. ################################################################[ 14.460000] Open Function !! ###############[ 14.460000] PartInfo->partNumber = 0x7,Had Partition Header!! Desktop Manager ##############################[ 14.470000] app_dev_release enter!! ################[ 14.470000] Open Function !! ########################[ 14.480000] PartInfo->partNumber = 0xa,Had Partition Header!! ######### Get e[ 14.490000] PartInfo->partNumber = 0xb,Had Partition Header!! nv UNIQUEKEY_FIL[ 14.490000] app_dev_release enter!! E_PATH fail! Use default: /vp_mnt/if/UniqueKey.bin Open /vp_mnt/if/UniqueKey.bin fail! SystemUpgrade.c: SysUpgrade_Init() ############ READ BACK CHECKING IS ENABLED!! SystemUpgrade.c: SysUpgrade_Init() AppHeader Info SystemUpgrade.c: SysUpgrade_Init() ====================================== SystemUpgrade.c: SysUpgrade_Init() headerTag = 0x50415047 SystemUpgrade.c: SysUpgrade_Init() imageVersion = 0x98 SystemUpgrade.c: SysUpgrade_Init() headerSize = 16384 SystemUpgrade.c[ 14.540000] [SPEAKER 25] : SysUpgrade_Ini[ 14.540000] [SPEAKER 25] t() totalAppSize = 33554432 SystemUpgrade.c: SysUpgrade_Init() totalPartNumber = 0xf SystemUpgrade.c: SysUpgrade_Init() checkSum = 0x0 SystemUpgrade.c: SysUpgrade_Init() SysUpgrade_Init() success!! version1 partition is selected. SystemUpgrade.c: SysUpgrade_Init() +++++++++++++++++++++++++++++++++++++++++++++++++++ SystemUpgrade.c: SysUpgrade_Init() own : v7 SystemUpgrade.c: SysUpgrade_Init() loader_1 : v7 SystemUpgrade.c: SysUpgrade_Init() loader_2 : v0 SystemUpgrade.c: SysUpgrade_Init() kernel_1 : v7 SystemUpgrade.c: SysUpgrade_Init() kernel_2 : v0 SystemUpgrade.c: SysUpgrade_Init() fastboot_1 : v7 SystemUpgrade.c: SysUpgrade_Init() fastboot_2 : v0 SystemUpgrade.c: SysUpgrade_Init() system_1 : v7 SystemUpgrade.c: SysUpgrade_Init() system_2 : v0 SystemUpgrade.c: SysUpgrade_Abort() Abort!!!!!!!!!!!!!!!!!!!!!!!!!!!! desktopManager: signalApp(7) desktopManager: signalApp(): bundle_pid=0, title_pid=0, title_loc=- ===================Launch BUNDLE=================== vfork_system("/system/lib/vtech/_Run_Bundle") desktopManager: detected NAND cart insert... vfork_system("nand_mount.sh add") key_thread: start phonejack_thread: start --- +++++++++++++++++++++++++++++++++++++++++++ ++ _Run_Bundle +++++++++++++++++++++++++++++++++++++++++++ +++ Run Bundle vfork_system("/system/lib/vtech/_Run_Bundle") returns 0 Desktop Manager: Initilaize OK /system/bin/vtech/nand_mount.sh add [ 14.920000] vmtd_fops_open(): VMTD open [ 14.920000] [INNOTAB_NAND] FUNC(innotab_nand_init) LINE(222) nand card not inserted!! VMTD_IOC[ 14.940000] vmtd_fops_release(): VMTD release _ADD_DEV error: dev[1] Add device failure ... umount: can't umount /vp_mnt/cart: Invalid argument vfork_system("nand_mount.sh add") returns 1 19700101000012 >>> appswitch: pop and exec below app, 1 remain in stack. >>> exec_argv[0] = "++NoHome" >>> exec_argv[1] = "./clock.sh" >>> exec_argv[2] = "-s" app launch successfully: pid=295 wait_processes_terminate(295) -- start desktopManager: detected NAND cart remove... desktopManager: signalApp(3) desktopManager: signalApp(): bundle_pid=294, title_pid=0, title_loc=- vfork_system("nand_mount.sh remove") /system/bin/vtech/nand_mount.sh remove umount: can't umount /vp_mnt/cart: No such file or directory /vp_mnt/cart: No such file or directory rmdir: '/vp_mnt/cart': No such file or directory [ 16.610000] vmtd_fops_open(): VMTD open [ 16.630000] innotab_nand_chip_del_mtd() - 672: InnoTab NAND MTD device not found: 1 VMTD_IOC[ 16.630000] vmtd_fops_release(): VMTD release _DEL_MTD error: dev[1] [ 16.670000] vmtd_fops_open(): VMTD open [ 16.690000] innotab_nand_chip_release() - 480: InnoTab NAND MTD device not found: 1 VMTD_IOC[ 16.690000] vmtd_fops_release(): VMTD release _DEL_DEV error: dev[1] vfork_system("nand_mount.sh remove") returns 255 Register Parser Register Parser <.MP3 File Parser> Register Parser <.WAV File Parser> Register Parser Register Parser <.APE File Parser> Register Parser <.AAC File Parser> setting Clock. vfork_system("hwclock -w") [ 19.090000] [arch/arm/mach-gpl32900/rtc/gp_rtc.c:gp_rtcdrv_set_time] : [ 19.100000] ====>111 0 1 0 0 16 vfork_system("hwclock -w") returns 0 ================= the last orientation is portrait =================== Received terminate message! fade in last step *************** mStepAlphaValue = 0 Loading Screen Exit.... fade in send message *************** mStepAlphaValue = -16 starting pid 263, tty '': '-/bin/sh' / # ls audiomixer_socket init.rc sbin tmp bin lib showlogo usr dev media sys var etc mnt sysinit vp_mnt init proc sysinit.lua init.project.rc root system / # cat /proc/mem/ # cat /proc/meminfo MemTotal: 31816 kB MemFree: 3696 kB Buffers: 704 kB Cached: 8736 kB SwapCached: 0 kB Active: 8764 kB Inactive: 8148 kB Active(anon): 7184 kB Inactive(anon): 6412 kB Active(file): 1580 kB Inactive(file): 1736 kB Unevictable: 6120 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 13620 kB Mapped: 2268 kB Shmem: 4 kB Slab: 2272 kB SReclaimable: 496 kB SUnreclaim: 1776 kB KernelStack: 352 kB PageTables: 248 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 15908 kB Committed_AS: 112816 kB VmallocTotal: 483328 kB VmallocUsed: 30152 kB VmallocChunk: 446460 kB / # cat /proc/cp/ # cat /proc/cpui/ # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 7 (v6l) BogoMIPS : 359.62 Features : swp half thumb fastmult vfp edsp java CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xb76 CPU revision : 7 Hardware : GPL32900 Revision : 0000 Serial : 0000000000000000 / # busy/ # busybox BusyBox v1.17.3 (2011-06-03 10:40:24 CST) multi-call binary. Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko and others. Licensed under GPLv2. See source distribution for full notice. Usage: busybox [function] [arguments]... or: function [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use and BusyBox will act like whatever it was invoked as. Currently defined functions: [, [[, arp, ash, awk, basename, blkid, bunzip2, bzcat, bzip2, cal, cat, catv, chattr, chgrp, chmod, chown, chroot, chrt, cksum, cmp, comm, cp, cpio, crond, crontab, cttyhack, cut, date, dd, depmod, devmem, df, dirname, dmesg, dnsdomainname, dos2unix, du, echo, ed, egrep, eject, env, expand, expr, false, fdisk, fgrep, find, flock, fold, free, fsck, fsync, ftpget, ftpput, grep, gunzip, gzip, halt, hd, head, hexdump, hostid, hostname, hwclock, id, ifconfig, ifdown, ifup, inetd, init, insmod, install, ip, ipaddr, iplink, iproute, iprule, iptunnel, kill, killall, killall5, length, ln, logname, losetup, ls, lsattr, lsmod, lsusb, lzop, lzopcat, md5sum, mdev, mesg, mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.vfat, mknod, mkswap, mktemp, modinfo, modprobe, more, mount, mv, nc, netstat, nice, nohup, nslookup, od, pidof, ping, pkill, poweroff, printenv, printf, ps, pwd, rdate, readlink, realpath, reboot, renice, rm, rmdir, rmmod, route, run-parts, sed, seq, sh, sha1sum, sha256sum, sha512sum, sleep, sort, split, start-stop-daemon, stat, stty, sum, swapoff, swapon, switch_root, sync, sysctl, tac, tail, tar, tee, telnet, telnetd, test, time, top, touch, tr, traceroute, true, tty, udhcpc, umount, uname, unexpand, uniq, unix2dos, unlzop, unzip, uptime, usleep, uudecode, uuencode, vi, wc, wget, which, who, whoami, xargs, yes, zcat / # cat /prov/c/ver/ # cat /proc/version Linux version 2.6.32.94 (vicsiu@vicsiu-linux) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #55 PREEMPT Wed Nov 9 18:57:36 HKT 2011 / # cd /lib /lib # ls image libdl.so.2 libresample.so libz.so ld-linux.so.3 libgcc_s.so.1 librt.so.1 modules libaudiomixer.so libm.so.6 libstdc++.so.6 libc.so.6 libpthread.so.0 libts.so /lib #