Difference between revisions of "Banana Pi"
m (change formatting) |
m (added Category:Banana Pi using HotCat) |
||
Line 62: | Line 62: | ||
* Bananian | * Bananian | ||
* Android 4.4 | * Android 4.4 | ||
+ | |||
+ | [[Category:Banana Pi]] |
Revision as of 06:38, 14 March 2015
The Banana Pi is an open source computer capable of running Linux and Android 4.4. It has an AllWinner A20 SoC with 1GB of memory and a dual core ARM CPU.
Banana Pi Resources
Banana Pi Community
Specifications
CPU | A20 ARM® Cortex™-A7 Dual-Core |
GPU | ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1 |
Memory (SDRAM) | 1GB DDR3 (shared with GPU) |
Onboard Storage | SD (Max. 64GB) / MMC card slot UP to 2T on SATA disk |
Onboard Network | 10/100/1000 Ethernet RJ45 (optional USB WIFI Dongle) |
Camera Input | A CSI input connector allows for the connection of a designed camera module |
Sound Input | Mic |
Video Outputs | HDMI, CVBS , LVDS/RGB |
Audio Output | 3.5 mm Jack and HDMI |
Power Source | 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG) |
USB 2.0 Ports | 2 (direct from Allwinner A20 chip) |
Buttons | Reset button: Next to MicroUSB connector
Power button: Next to Reset button UBoot button (optional): Behind HDMI connector |
GPIO(2X13) pin | GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground. |
LED | Power Status LED (Red)
Ethernet Status LED (Blue) User Define LED (Green) |
Remote | IR |
OS Support
- Raspbian
- Lubuntu
- OpenSuse
- Fedora
- ArchLinux
- Bananian
- Android 4.4