Difference between revisions of "BeagleBoardDebian"
(→Help) |
m (2015-08-17) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 71: | Line 71: | ||
git checkout origin/v4.1.x -b tmp | git checkout origin/v4.1.x -b tmp | ||
./build_kernel.sh | ./build_kernel.sh | ||
− | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel | + | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y |
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | ||
cd ti-linux-kernel-dev | cd ti-linux-kernel-dev | ||
− | git checkout origin/ti-linux- | + | git checkout origin/ti-linux-4.1.y -b tmp |
./build_kernel.sh | ./build_kernel.sh | ||
Line 84: | Line 84: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.5-ti-r10 kernel | ||
+ | ** BeagleBoard-X15: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel | ||
+ | ** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.1-ti-r2 kernel | ||
+ | ** BeagleBoard-X15: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel | ** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel | ||
Line 89: | Line 99: | ||
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel | ** OMAP5432 uEVM: v3.14.43-ti-r67 kernel | ||
** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Services Active: | Services Active: | ||
Line 109: | Line 109: | ||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz |
Verify Image with: | Verify Image with: | ||
− | md5sum debian-8.1-console-armhf-2015- | + | md5sum debian-8.1-console-armhf-2015-08-17.tar.xz |
− | + | 4633c5498760ae704885281a9026e4a4 debian-8.1-console-armhf-2015-08-17.tar.xz | |
Unpack Image: | Unpack Image: | ||
− | tar xf debian-8.1-console-armhf-2015- | + | tar xf debian-8.1-console-armhf-2015-08-17.tar.xz |
− | cd debian-8.1-console-armhf-2015- | + | cd debian-8.1-console-armhf-2015-08-17 |
If you don't know the location of your SD card: | If you don't know the location of your SD card: | ||
Line 148: | Line 148: | ||
board options: | board options: | ||
− | *BeagleBoard Ax/Bx/Cx/Dx | + | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle |
− | *BeagleBoard xM | + | *BeagleBoard xM - omap3-beagle-xm |
− | *BeagleBone/Black | + | *BeagleBone White/Black/Green - beaglebone |
− | *OMAP5432 uEVM | + | *OMAP5432 uEVM - omap5-uevm |
− | *BeagleBoard-X15 | + | *BeagleBoard-X15 - am57xx-beagle-x15 |
So for the BeagleBoard xM: | So for the BeagleBoard xM: | ||
Line 161: | Line 161: | ||
git clone https://github.com/RobertCNelson/omap-image-builder.git | git clone https://github.com/RobertCNelson/omap-image-builder.git | ||
cd omap-image-builder | cd omap-image-builder | ||
− | git checkout v2015. | + | git checkout v2015.08 -b tmp |
Stable: | Stable: | ||
Line 174: | Line 174: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.5-ti-r10 kernel | ||
+ | ** BeagleBoard-X15: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel | ||
+ | ** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel | ||
+ | ** OMAP5432 uEVM: v4.1.1-ti-r2 kernel | ||
+ | ** BeagleBoard-X15: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel | ** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel | ||
Line 179: | Line 189: | ||
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel | ** OMAP5432 uEVM: v3.14.43-ti-r67 kernel | ||
** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ||
− | |||
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz |
Verify Image with: | Verify Image with: | ||
− | md5sum debian-stretch-console-armhf-2015- | + | md5sum debian-stretch-console-armhf-2015-08-17.tar.xz |
− | + | b10a5e002914fed3914e395591bf23c2 debian-stretch-console-armhf-2015-08-17.tar.xz | |
Unpack image: | Unpack image: | ||
− | tar xf debian-stretch-console-armhf-2015- | + | tar xf debian-stretch-console-armhf-2015-08-17.tar.xz |
− | cd debian-stretch-console-armhf-2015- | + | cd debian-stretch-console-armhf-2015-08-17 |
Then follow the directions shown above with the other images... | Then follow the directions shown above with the other images... | ||
Line 200: | Line 205: | ||
= Flasher = | = Flasher = | ||
− | == eMMC: BeagleBone Black == | + | == eMMC: BeagleBone Black/Green == |
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | ||
Line 217: | Line 222: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** BeagleBone Black/Green: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** BeagleBone Black/Green: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
− | ** BeagleBone Black: v3.14.43-ti-r67 | + | ** BeagleBone Black/Green: v3.14.43-ti-r67 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015- | + | md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | c4bb38cb3aa760ad75e8ef5272b33b0c BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | 3ca10baec660c293429f25cfc6990617 BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
− | + | Linux: (bmaptool 3.2) | |
− | + | sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ | |
+ | BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX | ||
− | Linux: | + | Linux: (dd) |
− | unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015- | + | unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
− | sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015- | + | sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX |
= raw microSD img = | = raw microSD img = | ||
Line 254: | Line 262: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** Beagle: v4.1.5-armv7-x2 kernel | ||
+ | *2015-07-08 | ||
+ | ** Beagle: v4.1.1-armv7-x1 kernel | ||
*2015-06-11 | *2015-06-11 | ||
− | ** Beagle: v4.1.0-rc7-armv7-x0 | + | ** Beagle: v4.1.0-rc7-armv7-x0 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum bb-debian-8.1-console-armhf-2015- | + | md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | 0cbd47261bdd1b876e829c062789233a bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | 0cbd47261bdd1b876e829c062789233a bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
− | Linux: | + | Linux: (bmaptool 3.2) |
− | unxz bb-debian-8.1-console-armhf-2015- | + | sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ |
− | sudo dd if=./bb-debian-8.1-console-armhf-2015- | + | bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX |
+ | |||
+ | Linux: (dd) | ||
+ | unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
+ | sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX | ||
== BeagleBoard xM == | == BeagleBoard xM == | ||
Line 286: | Line 300: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** Beagle xM: v4.1.5-armv7-x2 kernel | ||
+ | *2015-07-08 | ||
+ | ** Beagle xM: v4.1.1-armv7-x1 kernel | ||
*2015-06-11 | *2015-06-11 | ||
− | ** Beagle xM: v4.1.0-rc7-armv7-x0 | + | ** Beagle xM: v4.1.0-rc7-armv7-x0 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum bbxm-debian-8.1-console-armhf-2015- | + | md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | b0b8f64aac92f5cc280413a80b959a6d bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | b042dec7d980562cfbb4414ad5ce5cde bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
+ | |||
+ | Linux: (bmaptool 3.2) | ||
+ | sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ | ||
+ | bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX | ||
− | Linux: | + | Linux: (dd) |
− | unxz bbxm-debian-8.1-console-armhf-2015- | + | unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
− | sudo dd if=./bbxm-debian-8.1-console-armhf-2015- | + | sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX |
− | == BeagleBone/ | + | == BeagleBone White/Black/Green == |
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | ||
Line 318: | Line 338: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum bone-debian-8.1-console-armhf-2015- | + | md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | 0561042d4f3cf806fbbd88d84777bbc4 bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | 61cda9556caf4e6ba81421d6d5ba8f3d bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
− | Linux: | + | Linux: (bmaptool 3.2) |
− | unxz bone-debian-8.1-console-armhf-2015- | + | sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ |
− | sudo dd if=./bone-debian-8.1-console-armhf-2015- | + | bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX |
+ | |||
+ | Linux: (dd) | ||
+ | unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
+ | sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX | ||
== OMAP5432 uEVM == | == OMAP5432 uEVM == | ||
Line 350: | Line 376: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** OMAP5432 uEVM: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** OMAP5432 uEVM: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
− | ** | + | ** OMAP5432 uEVM: v3.14.43-ti-r67 kernel |
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum omap5-uevm-debian-8.1-console-armhf-2015- | + | md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | d03f202299266eec0ef9d730aec6c77a omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | 8a0dd02bc637345a8891b75d5c5899bb omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
− | Linux: | + | Linux: (bmaptool 3.2) |
− | unxz omap5-uevm-debian-8.1-console-armhf-2015- | + | sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ |
− | sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015- | + | omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX |
+ | |||
+ | Linux: (dd) | ||
+ | unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
+ | sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX | ||
== BeagleBoard-X15 == | == BeagleBoard-X15 == | ||
Line 382: | Line 414: | ||
Image Updated: | Image Updated: | ||
+ | *2015-08-17 | ||
+ | ** BeagleBoard-X15: v4.1.5-ti-r10 kernel | ||
+ | *2015-07-08 | ||
+ | ** BeagleBoard-X15: v4.1.1-ti-r2 kernel | ||
*2015-06-11 | *2015-06-11 | ||
** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ** BeagleBoard-X15: v3.14.43-ti-r67 kernel | ||
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/2015- | + | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
+ | wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap | ||
Verify Image with: | Verify Image with: | ||
− | md5sum bbx15-debian-8.1-console-armhf-2015- | + | md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb* |
− | + | 6113cf783d5cbd302d0d669cd94ea90c bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap | |
+ | 66534f87f3e62d22386714214027a9d4 bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz | ||
+ | |||
+ | Linux: (bmaptool 3.2) | ||
+ | sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ | ||
+ | bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX | ||
− | Linux: | + | Linux: (dd) |
− | unxz bbx15-debian-8.1-console-armhf-2015- | + | unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz |
− | sudo dd if=./bbx15-debian-8.1-console-armhf-2015- | + | sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX |
= Debian Configuration = | = Debian Configuration = |
Revision as of 07:23, 18 August 2015
This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
- 1 Help
- 2 Official BeagleBoard.org Images for shipping with BeagleBone Black
- 3 Recommended Beagle Software
- 4 Debian NetInstall
- 5 Demo Image
- 6 Flasher
- 7 raw microSD img
- 8 Debian Configuration
- 9 Building Kernel
- 10 Upgrading from Debian 5 to Debian 6
- 11 Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Official BeagleBoard.org Images for shipping with BeagleBone Black
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard xM --dtb omap3-beagle-xm BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB
Debian 8 (jessie)
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
- Advanced Users only: Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.1.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-4.1.y -b tmp ./build_kernel.sh
Debian (jessie)
Default username/password:
- username: debian
- password: temppwd
Image Updated:
- 2015-08-17
- Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
- OMAP5432 uEVM: v4.1.5-ti-r10 kernel
- BeagleBoard-X15: v4.1.5-ti-r10 kernel
- 2015-07-08
- Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
- BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
- OMAP5432 uEVM: v4.1.1-ti-r2 kernel
- BeagleBoard-X15: v4.1.1-ti-r2 kernel
- 2015-06-11
- Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
- BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
- OMAP5432 uEVM: v3.14.43-ti-r67 kernel
- BeagleBoard-X15: v3.14.43-ti-r67 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-8.1-console-armhf-2015-08-17.tar.xz
Verify Image with:
md5sum debian-8.1-console-armhf-2015-08-17.tar.xz 4633c5498760ae704885281a9026e4a4 debian-8.1-console-armhf-2015-08-17.tar.xz
Unpack Image:
tar xf debian-8.1-console-armhf-2015-08-17.tar.xz cd debian-8.1-console-armhf-2015-08-17
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- BeagleBone White/Black/Green - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2015.08 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
Testing:
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Debian Testing (stretch)
Image Updated:
- 2015-08-17
- Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
- OMAP5432 uEVM: v4.1.5-ti-r10 kernel
- BeagleBoard-X15: v4.1.5-ti-r10 kernel
- 2015-07-08
- Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
- BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
- OMAP5432 uEVM: v4.1.1-ti-r2 kernel
- BeagleBoard-X15: v4.1.1-ti-r2 kernel
- 2015-06-11
- Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
- BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
- OMAP5432 uEVM: v3.14.43-ti-r67 kernel
- BeagleBoard-X15: v3.14.43-ti-r67 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/elinux/debian-stretch-console-armhf-2015-08-17.tar.xz
Verify Image with:
md5sum debian-stretch-console-armhf-2015-08-17.tar.xz b10a5e002914fed3914e395591bf23c2 debian-stretch-console-armhf-2015-08-17.tar.xz
Unpack image:
tar xf debian-stretch-console-armhf-2015-08-17.tar.xz cd debian-stretch-console-armhf-2015-08-17
Then follow the directions shown above with the other images...
Flasher
eMMC: BeagleBone Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2015-08-17
- BeagleBone Black/Green: v4.1.5-ti-r10 kernel
- 2015-07-08
- BeagleBone Black/Green: v4.1.1-ti-r2 kernel
- 2015-06-11
- BeagleBone Black/Green: v3.14.43-ti-r67 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb* c4bb38cb3aa760ad75e8ef5272b33b0c BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap 3ca10baec660c293429f25cfc6990617 BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./BBB-eMMC-flasher-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
raw microSD img
BeagleBoard (classic)
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2015-08-17
- Beagle: v4.1.5-armv7-x2 kernel
- 2015-07-08
- Beagle: v4.1.1-armv7-x1 kernel
- 2015-06-11
- Beagle: v4.1.0-rc7-armv7-x0 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum bb-debian-8.1-console-armhf-2015-08-17-2gb* 0cbd47261bdd1b876e829c062789233a bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap 0cbd47261bdd1b876e829c062789233a bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bb-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bb-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./bb-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2015-08-17
- Beagle xM: v4.1.5-armv7-x2 kernel
- 2015-07-08
- Beagle xM: v4.1.1-armv7-x1 kernel
- 2015-06-11
- Beagle xM: v4.1.0-rc7-armv7-x0 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum bbxm-debian-8.1-console-armhf-2015-08-17-2gb* b0b8f64aac92f5cc280413a80b959a6d bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap b042dec7d980562cfbb4414ad5ce5cde bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bbxm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./bbxm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
BeagleBone White/Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2015-08-17
- BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
- 2015-07-08
- BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
- 2015-06-11
- BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum bone-debian-8.1-console-armhf-2015-08-17-2gb* 0561042d4f3cf806fbbd88d84777bbc4 bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap 61cda9556caf4e6ba81421d6d5ba8f3d bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bone-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bone-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./bone-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2015-08-17
- OMAP5432 uEVM: v4.1.5-ti-r10 kernel
- 2015-07-08
- OMAP5432 uEVM: v4.1.1-ti-r2 kernel
- 2015-06-11
- OMAP5432 uEVM: v3.14.43-ti-r67 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb* d03f202299266eec0ef9d730aec6c77a omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap 8a0dd02bc637345a8891b75d5c5899bb omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./omap5-uevm-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2015-08-17
- BeagleBoard-X15: v4.1.5-ti-r10 kernel
- 2015-07-08
- BeagleBoard-X15: v4.1.1-ti-r2 kernel
- 2015-06-11
- BeagleBoard-X15: v3.14.43-ti-r67 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap
Verify Image with:
md5sum bbx15-debian-8.1-console-armhf-2015-08-17-2gb* 6113cf783d5cbd302d0d669cd94ea90c bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap 66534f87f3e62d22386714214027a9d4 bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz
Linux: (bmaptool 3.2)
sudo bmaptool copy --bmap bbx15-debian-8.1-console-armhf-2015-08-17-2gb.bmap \ bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
Linux: (dd)
unxz bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img.xz sudo dd if=./bbx15-debian-8.1-console-armhf-2015-08-17-2gb.img of=/dev/sdX
Debian Configuration
Install Latest Kernel Image
Script:
cd /opt/scripts/tools git pull
Stable:
./update_kernel.sh
Testing:
./update_kernel.sh --beta-kernel
Custom: (has to be on rcn-ee.net)
./update_kernel.sh --kernel v3.8.13-bone69
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install sgx modules (3.14.x-ti or 4.1.x kernel):
sudo apt-get install ti-sgx-es8-modules-`uname -r` sudo depmod -a `uname -r` sudo update-initramfs -uk `uname -r`
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev/ git checkout origin/ti-linux-3.14.y -b tmp-sgx ./sgx_create_package.sh
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.1 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade