Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (2016-02-11)
m (2016-09-20)
(7 intermediate revisions by 2 users not shown)
Line 13: Line 13:
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** Kernel Trees
 
** Kernel Trees
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch]
 
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
Line 41: Line 41:
 
Device Options:
 
Device Options:
 
  BeagleBoard --dtb omap3-beagle
 
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --dtb omap3-beagle-xm
+
  BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 
  BeagleBone (serial) --dtb am335x-bone-serial
 
  BeagleBone (serial) --dtb am335x-bone-serial
 
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone (video via cape) --dtb am335x-bone-video
Line 69: Line 70:
 
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 
  cd armv7-multiplatform
 
  cd armv7-multiplatform
  git checkout origin/v4.4.x -b tmp
+
  git checkout origin/v4.8.x -b tmp
 
  ./build_kernel.sh
 
  ./build_kernel.sh
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
+
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
 
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 
  cd ti-linux-kernel-dev
 
  cd ti-linux-kernel-dev
  git checkout origin/ti-linux-rt-4.1.y -b tmp
+
  git checkout origin/ti-linux-4.4.y -b tmp
 
  ./build_kernel.sh
 
  ./build_kernel.sh
  
Line 84: Line 85:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** BeagleBoard xM: v4.4.1-armv7-x5 kernel
+
** BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
** BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel
+
** BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
** OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel
+
** OMAP5432 uEVM: v4.4.21-ti-r45 kernel
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
+
** BeagleBoard-X15: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** BeagleBoard xM: v4.4.0-armv7-x3 kernel
+
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
+
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
+
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
+
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
+
** BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
+
** BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
+
** OMAP5432 uEVM: v4.4.9-ti-r25 kernel
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
+
** BeagleBoard-X15: v4.4.9-ti-r25 kernel
  
 
Services Active:
 
Services Active:
Line 109: Line 110:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/elinux/debian-8.3-console-armhf-2016-02-11.tar.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/elinux/debian-8.6-console-armhf-2016-09-20.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-8.3-console-armhf-2016-02-11.tar.xz
+
  sha256sum debian-8.6-console-armhf-2016-09-20.tar.xz
  b6a96bb73df671a3ccaea380faec134c6d4ba82cd6ec9e04224160f3f3f8c4d1 debian-8.3-console-armhf-2016-02-11.tar.xz
+
  b508b9ef32c4f61536ac432f7ac8e266ae9b39189888727fc1252339e8fa2166 debian-8.6-console-armhf-2016-09-20.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-8.3-console-armhf-2016-02-11.tar.xz
+
  tar xf debian-8.6-console-armhf-2016-09-20.tar.xz
  cd debian-8.3-console-armhf-2016-02-11
+
  cd debian-8.6-console-armhf-2016-09-20
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
Line 161: Line 162:
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2016.02 -b tmp
+
  git checkout v2016.09.1 -b tmp
  
 
Stable:
 
Stable:
Line 174: Line 175:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** archive broken: connman dependicy...
+
** BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
*2016-01-14
+
** BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
** archive broken: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=810785
+
** OMAP5432 uEVM: v4.4.21-ti-r45 kernel
*2015-12-11
+
** BeagleBoard-X15: v4.4.21-ti-r45 kernel
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
+
*2016-06-09
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
+
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
+
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
+
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
 +
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
 +
*2016-05-12
 +
** BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel
 +
** BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel
 +
** OMAP5432 uEVM: v4.4.9-ti-r25 kernel
 +
** BeagleBoard-X15: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2015-12-11/elinux/debian-stretch-console-armhf-2015-12-11.tar.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/elinux/debian-stretch-console-armhf-2016-09-20.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-stretch-console-armhf-2015-12-11.tar.xz
+
  sha256sum debian-stretch-console-armhf-2016-09-20.tar.xz
  1a87d83e4238b52b10d616a345a5ce4e3bc04dbb86590e981f6ae5e45e55b7ba debian-stretch-console-armhf-2015-12-11.tar.xz
+
  39e1c060ec0514b972670dcc2abb83e4f5668d798d475727450c0e299deff9be debian-stretch-console-armhf-2016-09-20.tar.xz
  
 
Unpack image:
 
Unpack image:
  tar xf debian-stretch-console-armhf-2015-12-11.tar.xz
+
  tar xf debian-stretch-console-armhf-2016-09-20.tar.xz
  cd debian-stretch-console-armhf-2015-12-11
+
  cd debian-stretch-console-armhf-2016-09-20
  
 
Then follow the directions shown above with the other images...
 
Then follow the directions shown above with the other images...
Line 216: Line 223:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** BeagleBone Black/Green: v4.1.17-ti-rt-r47 kernel
+
** BeagleBone Black/Green: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
+
** BeagleBone Black/Green: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** BeagleBone Black/Green: v4.1.13-ti-r36 kernel
+
** BeagleBone Black/Green: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/flasher/BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-02-11/flasher/BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap
 
  
 
Verify Image with:
 
Verify Image with:
  sha256sum BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb*
+
  sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb*
  beaf519c5a4276010b971f97603ee80e42c218a10abeea1f1aa1d7a0d9fd7c92 BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap
+
  eddbd1096e48fc04e28bb9c834f79349081e472d1fdba18c2a0d0f3d5860b6b2 BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
55ab5dc14911df8310dfc9a2d4f277a7c89b2aebbe53c8dfa72b9230a45e870a  BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
 
  
Linux: (bmaptool 3.2)
+
Windows/Mac/Linux gui
  sudo bmaptool copy --bmap BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap \
+
  http://etcher.io
BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz /dev/sdX
 
  
 
Linux: (dd)
 
Linux: (dd)
  unxz BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./BBB-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img of=/dev/sdX
 
  
 
== eMMC: BeagleBoard-X15 ==
 
== eMMC: BeagleBoard-X15 ==
Line 257: Line 260:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
+
** BeagleBoard-X15: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
+
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
+
** BeagleBoard-X15: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/flasher/bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-02-11/flasher/bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap
 
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb*
+
  sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb*
  bd487254e2ac47f8d361ec3422f105f08ecf5f5e97abc4def62e9fc06791247f bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap
+
  2c6da0e2e580261a1ab22e9eb4a3a48026e1c39669ca06e89aee9d25c7621db6 bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
b685e7130cb314bd64d4493266d3cade96348896d9afa266c8b2d546529a6f76  bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
 
  
Linux: (bmaptool 3.2)
+
Windows/Mac/Linux gui
  sudo bmaptool copy --bmap bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.bmap \
+
  http://etcher.io
bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz /dev/sdX
 
  
 
Linux: (dd)
 
Linux: (dd)
  unxz bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./bbx15-eMMC-flasher-debian-8.3-console-armhf-2016-02-11-2gb.img of=/dev/sdX
 
  
 
= raw microSD img =
 
= raw microSD img =
 +
 +
== BeagleBoard xM ==
 +
 +
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
 +
 +
User: debian
 +
pass: temppwd
 +
 +
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
 +
 +
Image Updated:
 +
*2016-09-20
 +
** BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
 +
*2016-06-09
 +
** BeagleBoard xM: v4.6.1-armv7-x4 kernel
 +
*2016-05-12
 +
** BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel
 +
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
 +
 +
Verify Image with:
 +
sha256sum bbxm-debian-8.6-console-armhf-2016-09-20-2gb*
 +
33a04a8700999e9427b4708d7ea0f97960db3b257765efe02a14ffe152d14ee5  bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
 +
 +
Windows/Mac/Linux gui
 +
http://etcher.io
 +
 +
Linux: (dd)
 +
xzcat bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== BeagleBone White/Black/Green ==
 
== BeagleBone White/Black/Green ==
Line 297: Line 330:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** BeagleBone White/Black/Green: v4.1.17-ti-rt-r47 kernel
+
** BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
+
** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
+
** BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/microsd/bone-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-02-11/microsd/bone-debian-8.3-console-armhf-2016-02-11-2gb.bmap
 
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bone-debian-8.3-console-armhf-2016-02-11-2gb*
+
  sha256sum bone-debian-8.6-console-armhf-2016-09-20-2gb*
  280b2b3d792fca95833064f869b156aa64c61b67175161d10cca726d05db7372 bone-debian-8.3-console-armhf-2016-02-11-2gb.bmap
+
  16b7c1255d4e3eb5b1bb78adddc52a010a00c1727668fc8840a34fdb46349892 bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
bd0207b02a24f695a7e261a45929aaf9b16c30fc45a9fce03b82ed39a872f21c  bone-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
 
  
Linux: (bmaptool 3.2)
+
Windows/Mac/Linux gui
  sudo bmaptool copy --bmap bone-debian-8.3-console-armhf-2016-02-11-2gb.bmap \
+
  http://etcher.io
bone-debian-8.3-console-armhf-2016-02-11-2gb.img.xz /dev/sdX
 
  
 
Linux: (dd)
 
Linux: (dd)
  unxz bone-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  xzcat bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./bone-debian-8.3-console-armhf-2016-02-11-2gb.img of=/dev/sdX
 
  
 
== OMAP5432 uEVM ==
 
== OMAP5432 uEVM ==
Line 335: Line 364:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** OMAP5432 uEVM: v4.1.17-ti-rt-r47 kernel
+
** OMAP5432 uEVM: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
+
** OMAP5432 uEVM: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
+
** OMAP5432 uEVM: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/microsd/omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/microsd/omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-02-11/microsd/omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.bmap
 
  
 
Verify Image with:
 
Verify Image with:
  sha256sum omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb*
+
  sha256sum omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb*
  b2256659b29aec7ef413ec27468d1d0a2a7fdc989360bda9444801a389ba81d8 omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.bmap
+
  58e46f76761241a52a77d84cac3b7f2cbb6a8f4b545aed36d7ff61b979d4ad00 omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
34fa9bc528ddbf54d69968d0b16856b879d671ec369908a3044fecc83fbba4dd  omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
 
  
Linux: (bmaptool 3.2)
+
Windows/Mac/Linux gui
  sudo bmaptool copy --bmap omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.bmap \
+
  http://etcher.io
omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.img.xz /dev/sdX
 
  
 
Linux: (dd)
 
Linux: (dd)
  unxz omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  xzcat omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./omap5-uevm-debian-8.3-console-armhf-2016-02-11-2gb.img of=/dev/sdX
 
  
 
== BeagleBoard-X15 ==
 
== BeagleBoard-X15 ==
Line 373: Line 398:
  
 
Image Updated:
 
Image Updated:
*2016-02-11
+
*2016-09-20
** BeagleBoard-X15: v4.1.17-ti-rt-r47 kernel
+
** BeagleBoard-X15: v4.4.21-ti-r45 kernel
*2016-01-14
+
*2016-06-09
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
+
** BeagleBoard-X15: v4.4.12-ti-r30 kernel
*2015-12-11
+
*2016-05-12
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
+
** BeagleBoard-X15: v4.4.9-ti-r25 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2016-02-11/microsd/bbx15-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-02-11/microsd/bbx15-debian-8.3-console-armhf-2016-02-11-2gb.bmap
 
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-debian-8.3-console-armhf-2016-02-11-2gb*
+
  sha256sum bbx15-debian-8.6-console-armhf-2016-09-20-2gb*
  e44bfcde36a73290800f997b91ed5e08aa2f3f3b000f4e5ecf2d761a001e0074 bbx15-debian-8.3-console-armhf-2016-02-11-2gb.bmap
+
  49cbdfeff778a00b6ad136f78b682687256b4adb141e7a1826dc4997ba7cea32 bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz
a97753f1c80eb6cf8c95968b5500a56f93bb7fcfb41126affd34a9a4952afb22  bbx15-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
 
  
Linux: (bmaptool 3.2)
+
Windows/Mac/Linux gui
  sudo bmaptool copy --bmap bbx15-debian-8.3-console-armhf-2016-02-11-2gb.bmap \
+
  http://etcher.io
bbx15-debian-8.3-console-armhf-2016-02-11-2gb.img.xz /dev/sdX
 
  
 
Linux: (dd)
 
Linux: (dd)
  unxz bbx15-debian-8.3-console-armhf-2016-02-11-2gb.img.xz
+
  xzcat bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./bbx15-debian-8.3-console-armhf-2016-02-11-2gb.img of=/dev/sdX
 
  
 
= Debian Configuration =
 
= Debian Configuration =

Revision as of 19:58, 20 September 2016

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 8 (jessie)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.8.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (jessie)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2016-09-20
    • BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
    • OMAP5432 uEVM: v4.4.21-ti-r45 kernel
    • BeagleBoard-X15: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel
    • OMAP5432 uEVM: v4.4.9-ti-r25 kernel
    • BeagleBoard-X15: v4.4.9-ti-r25 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/elinux/debian-8.6-console-armhf-2016-09-20.tar.xz

Verify Image with:

sha256sum debian-8.6-console-armhf-2016-09-20.tar.xz
b508b9ef32c4f61536ac432f7ac8e266ae9b39189888727fc1252339e8fa2166  debian-8.6-console-armhf-2016-09-20.tar.xz

Unpack Image:

tar xf debian-8.6-console-armhf-2016-09-20.tar.xz
cd debian-8.6-console-armhf-2016-09-20

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.09.1 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Debian Testing (stretch)

Image Updated:

  • 2016-09-20
    • BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
    • OMAP5432 uEVM: v4.4.21-ti-r45 kernel
    • BeagleBoard-X15: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel
    • OMAP5432 uEVM: v4.4.9-ti-r25 kernel
    • BeagleBoard-X15: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/elinux/debian-stretch-console-armhf-2016-09-20.tar.xz

Verify Image with:

sha256sum debian-stretch-console-armhf-2016-09-20.tar.xz
39e1c060ec0514b972670dcc2abb83e4f5668d798d475727450c0e299deff9be  debian-stretch-console-armhf-2016-09-20.tar.xz

Unpack image:

tar xf debian-stretch-console-armhf-2016-09-20.tar.xz
cd debian-stretch-console-armhf-2016-09-20

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-09-20
    • BeagleBone Black/Green: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBone Black/Green: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBone Black/Green: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb*
eddbd1096e48fc04e28bb9c834f79349081e472d1fdba18c2a0d0f3d5860b6b2  BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2016-09-20
    • BeagleBoard-X15: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBoard-X15: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb*
2c6da0e2e580261a1ab22e9eb4a3a48026e1c39669ca06e89aee9d25c7621db6  bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-09-20
    • BeagleBoard xM: v4.8.0-rc7-armv7-x2 kernel
  • 2016-06-09
    • BeagleBoard xM: v4.6.1-armv7-x4 kernel
  • 2016-05-12
    • BeagleBoard xM: v4.6.0-rc7-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-8.6-console-armhf-2016-09-20-2gb*
33a04a8700999e9427b4708d7ea0f97960db3b257765efe02a14ffe152d14ee5  bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-09-20
    • BeagleBone White/Black/Green: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBone White/Black/Green: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum bone-debian-8.6-console-armhf-2016-09-20-2gb*
16b7c1255d4e3eb5b1bb78adddc52a010a00c1727668fc8840a34fdb46349892  bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-09-20
    • OMAP5432 uEVM: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • OMAP5432 uEVM: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • OMAP5432 uEVM: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/microsd/omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb*
58e46f76761241a52a77d84cac3b7f2cbb6a8f4b545aed36d7ff61b979d4ad00  omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-09-20
    • BeagleBoard-X15: v4.4.21-ti-r45 kernel
  • 2016-06-09
    • BeagleBoard-X15: v4.4.12-ti-r30 kernel
  • 2016-05-12
    • BeagleBoard-X15: v4.4.9-ti-r25 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-09-20/microsd/bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-8.6-console-armhf-2016-09-20-2gb*
49cbdfeff778a00b6ad136f78b682687256b4adb141e7a1826dc4997ba7cea32  bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-8.6-console-armhf-2016-09-20-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade