Difference between revisions of "BeagleBoardDebian"
(→SGX BeagleBone/BeagleBone Black) |
m (2016-10-06) |
||
(25 intermediate revisions by 2 users not shown) | |||
Line 13: | Line 13: | ||
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ||
** Kernel Trees | ** Kernel Trees | ||
− | *** [https://github.com/RobertCNelson/armv7-multiplatform/ | + | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v4.6.x kernel branch] |
+ | *** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone] | ||
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | ||
Line 40: | Line 41: | ||
Device Options: | Device Options: | ||
BeagleBoard --dtb omap3-beagle | BeagleBoard --dtb omap3-beagle | ||
− | BeagleBoard xM --dtb omap3-beagle-xm | + | BeagleBoard-xM --dtb omap3-beagle-xm |
+ | BeagleBoard-X15 --dtb am57xx-beagle-x15 | ||
BeagleBone (serial) --dtb am335x-bone-serial | BeagleBone (serial) --dtb am335x-bone-serial | ||
BeagleBone (video via cape) --dtb am335x-bone-video | BeagleBone (video via cape) --dtb am335x-bone-video | ||
Line 62: | Line 64: | ||
**--firmware : installs firmware | **--firmware : installs firmware | ||
**--serial-mode : debian-installer uses Serial Port | **--serial-mode : debian-installer uses Serial Port | ||
− | |||
= Demo Image = | = Demo Image = | ||
− | * '''Advanced Users only''': | + | * '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform |
git clone https://github.com/RobertCNelson/armv7-multiplatform.git | git clone https://github.com/RobertCNelson/armv7-multiplatform.git | ||
cd armv7-multiplatform | cd armv7-multiplatform | ||
− | git checkout origin/v4. | + | git checkout origin/v4.8.x -b tmp |
./build_kernel.sh | ./build_kernel.sh | ||
− | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel | + | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y |
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git | ||
cd ti-linux-kernel-dev | cd ti-linux-kernel-dev | ||
− | git checkout origin/ti-linux- | + | git checkout origin/ti-linux-4.4.y -b tmp |
./build_kernel.sh | ./build_kernel.sh | ||
Line 84: | Line 85: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** | + | ** BeagleBoard xM: v4.8.0-armv7-x2 kernel |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.23-ti-r51 kernel |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** | + | ** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.22-ti-r48 kernel |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** | + | ** BeagleBoard xM: v4.6.1-armv7-x4 kernel |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.12-ti-r30 kernel |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.12-ti-r30 kernel |
Services Active: | Services Active: | ||
Line 109: | Line 110: | ||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-8.6-console-armhf-2016-10-06.tar.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum debian-8.6-console-armhf-2016-10-06.tar.xz | |
− | + | e657544ae239f7a05c67fb1190c11fa05cea3ec265836baed3cc1881bf0a14ea debian-8.6-console-armhf-2016-10-06.tar.xz | |
Unpack Image: | Unpack Image: | ||
− | tar xf debian-8. | + | tar xf debian-8.6-console-armhf-2016-10-06.tar.xz |
− | cd debian-8. | + | cd debian-8.6-console-armhf-2016-10-06 |
If you don't know the location of your SD card: | If you don't know the location of your SD card: | ||
Line 148: | Line 149: | ||
board options: | board options: | ||
− | *BeagleBoard Ax/Bx/Cx/Dx | + | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle |
− | *BeagleBoard xM | + | *BeagleBoard xM - omap3-beagle-xm |
− | *BeagleBone/Black | + | *BeagleBone White/Black/Green - beaglebone |
− | *OMAP5432 uEVM | + | *OMAP5432 uEVM - omap5-uevm |
− | *BeagleBoard-X15 | + | *BeagleBoard-X15 - am57xx-beagle-x15 |
So for the BeagleBoard xM: | So for the BeagleBoard xM: | ||
Line 161: | Line 162: | ||
git clone https://github.com/RobertCNelson/omap-image-builder.git | git clone https://github.com/RobertCNelson/omap-image-builder.git | ||
cd omap-image-builder | cd omap-image-builder | ||
− | git checkout | + | git checkout v2016.10 -b tmp |
Stable: | Stable: | ||
Line 174: | Line 175: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** | + | ** BeagleBoard xM: v4.8.0-armv7-x2 kernel |
− | ** BeagleBone/BeagleBone Black: | + | ** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.23-ti-r51 kernel |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.23-ti-r51 kernel |
+ | *2016-09-28 | ||
+ | ** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.22-ti-r48 kernel | ||
+ | ** BeagleBoard-X15: v4.4.22-ti-r48 kernel | ||
+ | *2016-06-09 | ||
+ | ** BeagleBoard xM: v4.6.1-armv7-x4 kernel | ||
+ | ** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel | ||
+ | ** OMAP5432 uEVM: v4.4.12-ti-r30 kernel | ||
+ | ** BeagleBoard-X15: v4.4.12-ti-r30 kernel | ||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-stretch-console-armhf-2016-10-06.tar.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum debian-stretch-console-armhf-2016-10-06.tar.xz | |
− | + | 2c25552a6405b9e77d2e60a47e6bc6ed8679d1edf8bfa593e585f542bc24d125 debian-stretch-console-armhf-2016-10-06.tar.xz | |
Unpack image: | Unpack image: | ||
− | tar xf debian-stretch-console-armhf- | + | tar xf debian-stretch-console-armhf-2016-10-06.tar.xz |
− | cd debian-stretch-console-armhf- | + | cd debian-stretch-console-armhf-2016-10-06 |
Then follow the directions shown above with the other images... | Then follow the directions shown above with the other images... | ||
Line 195: | Line 206: | ||
= Flasher = | = Flasher = | ||
− | == eMMC: BeagleBone Black == | + | == eMMC: BeagleBone Black/Green == |
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | ||
Line 212: | Line 223: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** BeagleBone Black: | + | ** BeagleBone Black/Green: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** BeagleBone Black: | + | ** BeagleBone Black/Green: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** BeagleBone Black: | + | ** BeagleBone Black/Green: v4.4.12-ti-r30 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | d6b0d8988949587e3e412141b34a43786bca575d1e2a98519e68f19c4c6e1d04 BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
+ | |||
+ | Linux: (dd) | ||
+ | xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | ||
− | + | == eMMC: BeagleBoard-X15 == | |
− | |||
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. | |
− | |||
− | |||
− | + | Script for reference: (this is the script that writes to the eMMC) | |
+ | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh | ||
− | + | This script will only take about 5-6 Minutes after power on. | |
− | + | Notes: | |
+ | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. | ||
+ | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. | ||
User: debian | User: debian | ||
pass: temppwd | pass: temppwd | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** | + | ** BeagleBoard-X15: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** | + | ** BeagleBoard-X15: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** | + | ** BeagleBoard-X15: v4.4.12-ti-r30 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | d0b96a7765362f12bf558b65f5d350200aec2919d9b9ab7269b7c8f105d3aff3 bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
− | Linux: | + | Windows/Mac/Linux gui |
− | + | http://etcher.io | |
− | + | ||
+ | Linux: (dd) | ||
+ | xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | ||
+ | |||
+ | = raw microSD img = | ||
== BeagleBoard xM == | == BeagleBoard xM == | ||
Line 281: | Line 296: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** | + | ** BeagleBoard xM: v4.8.0-armv7-x2 kernel |
− | * | + | *2016-09-28 |
− | ** | + | ** BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel |
− | * | + | *2016-06-09 |
− | ** | + | ** BeagleBoard xM: v4.6.1-armv7-x4 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum bbxm-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | c69303a8a73fda3b1c2ca60b5bb59fa9801cdf68f183e69d52eaf55a707f1c07 bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
− | Linux: | + | Linux: (dd) |
− | + | xzcat bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | |
− | |||
− | == BeagleBone/ | + | == BeagleBone White/Black/Green == |
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager | ||
Line 313: | Line 330: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** BeagleBone/ | + | ** BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum bone-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | a94c4a4d5e83d42bb1ccca66af040c546da373a2e4140c49331a558964ef2d6e bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
− | Linux: | + | Windows/Mac/Linux gui |
− | + | http://etcher.io | |
− | + | ||
+ | Linux: (dd) | ||
+ | xzcat bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | ||
== OMAP5432 uEVM == | == OMAP5432 uEVM == | ||
Line 345: | Line 364: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** OMAP5432 uEVM: | + | ** OMAP5432 uEVM: v4.4.12-ti-r30 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/microsd/omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | 2671e0822c69015f4f132c4198eb93de323868513d8a6c3b901826b3bb0d6820 omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
− | Linux: | + | Linux: (dd) |
− | + | xzcat omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | |
− | |||
== BeagleBoard-X15 == | == BeagleBoard-X15 == | ||
Line 377: | Line 398: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2016-10-06 |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.23-ti-r51 kernel |
− | * | + | *2016-09-28 |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.22-ti-r48 kernel |
− | * | + | *2016-06-09 |
− | ** BeagleBoard-X15: | + | ** BeagleBoard-X15: v4.4.12-ti-r30 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | + | sha256sum bbx15-debian-8.6-console-armhf-2016-10-06-2gb* | |
− | + | c6e9b2be24668165d8e0e3d1a9548cdc12f13d2b4de5dca88f3c4e97641366f8 bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | |
+ | |||
+ | Windows/Mac/Linux gui | ||
+ | http://etcher.io | ||
− | Linux: | + | Linux: (dd) |
− | + | xzcat bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX | |
− | |||
= Debian Configuration = | = Debian Configuration = | ||
Line 399: | Line 422: | ||
==Install Latest Kernel Image== | ==Install Latest Kernel Image== | ||
− | + | General apt syntax for searching and installing a specific kernel: | |
− | cd /opt/scripts/tools | + | sudo apt-get update |
+ | sudo apt-cache search linux-image | grep <branch> | ||
+ | sudo apt-get install linux-image-<specific version> | ||
+ | sudo reboot | ||
+ | |||
+ | Latest kernel script | ||
+ | cd /opt/scripts/tools/ | ||
git pull | git pull | ||
+ | sudo ./update_kernel.sh <OPTIONS> | ||
− | + | == 3.8.x == | |
− | ./ | + | This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy |
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8 | ||
+ | |||
+ | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support | ||
+ | --bone-channel --stable | ||
+ | |||
+ | 3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai | ||
+ | --bone-xenomai-channel --stable | ||
+ | |||
+ | == 4.1.x-ti == | ||
+ | This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled. | ||
+ | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1 | ||
+ | Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y | ||
+ | |||
+ | 4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 | ||
+ | --ti-channel --stable | ||
+ | |||
+ | 4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT | ||
+ | --ti-rt-channel --stable | ||
+ | |||
+ | == Mainline (lts) == | ||
+ | |||
+ | 4.1.x BeagleBone/BeagleBone Black + SGX | ||
+ | --bone-kernel --lts | ||
+ | |||
+ | 4.1.x BeagleBone/BeagleBone Black + RT + SGX | ||
+ | --bone-rt-kernel --lts | ||
− | + | == Mainline == | |
− | ./ | + | 4.3.x BeagleBone/BeagleBone Black |
+ | --bone-kernel --testing | ||
− | + | == Debian 8: jessie == | |
− | + | sudo apt-get install linux-image-armmp | |
Reboot with your new Kernel Image. | Reboot with your new Kernel Image. | ||
Line 434: | Line 491: | ||
Note, these are FBDEV only, no xorg/x11/etc... | Note, these are FBDEV only, no xorg/x11/etc... | ||
− | Install | + | Install the "4.1.x" lts/bone kernel: |
− | + | http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor) | Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor) | ||
− | git clone https://github.com/RobertCNelson/bb-kernel | + | git clone https://github.com/RobertCNelson/bb-kernel.git |
− | cd | + | cd bb-kernel/ |
git checkout origin/am33x-v4.1 -b tmp-sgx | git checkout origin/am33x-v4.1 -b tmp-sgx | ||
./sgx_create_package.sh | ./sgx_create_package.sh |
Revision as of 11:53, 7 October 2016
This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
- 1 Help
- 2 Official BeagleBoard.org Images for shipping with BeagleBone Black
- 3 Recommended Beagle Software
- 4 Debian NetInstall
- 5 Demo Image
- 6 Flasher
- 7 raw microSD img
- 8 Debian Configuration
- 9 Building Kernel
- 10 Upgrading from Debian 5 to Debian 6
- 11 Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Trees
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Official BeagleBoard.org Images for shipping with BeagleBone Black
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard-xM --dtb omap3-beagle-xm BeagleBoard-X15 --dtb am57xx-beagle-x15 BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB
Debian 8 (jessie)
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro jessie
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro jessie
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
- Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.8.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-4.4.y -b tmp ./build_kernel.sh
Debian (jessie)
Default username/password:
- username: debian
- password: temppwd
Image Updated:
- 2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel
- BeagleBoard-X15: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBoard xM: v4.6.1-armv7-x4 kernel
- BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
- OMAP5432 uEVM: v4.4.12-ti-r30 kernel
- BeagleBoard-X15: v4.4.12-ti-r30 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-8.6-console-armhf-2016-10-06.tar.xz
Verify Image with:
sha256sum debian-8.6-console-armhf-2016-10-06.tar.xz e657544ae239f7a05c67fb1190c11fa05cea3ec265836baed3cc1881bf0a14ea debian-8.6-console-armhf-2016-10-06.tar.xz
Unpack Image:
tar xf debian-8.6-console-armhf-2016-10-06.tar.xz cd debian-8.6-console-armhf-2016-10-06
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- BeagleBone White/Black/Green - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2016.10 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_debian_jessie_armhf
Testing:
./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
Debian Testing (stretch)
Image Updated:
- 2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel
- BeagleBoard-X15: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBoard xM: v4.6.1-armv7-x4 kernel
- BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
- OMAP5432 uEVM: v4.4.12-ti-r30 kernel
- BeagleBoard-X15: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/elinux/debian-stretch-console-armhf-2016-10-06.tar.xz
Verify Image with:
sha256sum debian-stretch-console-armhf-2016-10-06.tar.xz 2c25552a6405b9e77d2e60a47e6bc6ed8679d1edf8bfa593e585f542bc24d125 debian-stretch-console-armhf-2016-10-06.tar.xz
Unpack image:
tar xf debian-stretch-console-armhf-2016-10-06.tar.xz cd debian-stretch-console-armhf-2016-10-06
Then follow the directions shown above with the other images...
Flasher
eMMC: BeagleBone Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2016-10-06
- BeagleBone Black/Green: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBone Black/Green: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBone Black/Green: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/flasher/BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb* d6b0d8988949587e3e412141b34a43786bca575d1e2a98519e68f19c4c6e1d04 BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat BBB-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
eMMC: BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: debian pass: temppwd
Image Updated:
- 2016-10-06
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBoard-X15: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBoard-X15: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/flasher/bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb* d0b96a7765362f12bf558b65f5d350200aec2919d9b9ab7269b7c8f105d3aff3 bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-eMMC-flasher-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
raw microSD img
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-10-06
- BeagleBoard xM: v4.8.0-armv7-x2 kernel
- 2016-09-28
- BeagleBoard xM: v4.8.0-rc8-armv7-x2 kernel
- 2016-06-09
- BeagleBoard xM: v4.6.1-armv7-x4 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum bbxm-debian-8.6-console-armhf-2016-10-06-2gb* c69303a8a73fda3b1c2ca60b5bb59fa9801cdf68f183e69d52eaf55a707f1c07 bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbxm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
BeagleBone White/Black/Green
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-10-06
- BeagleBone White/Black/Green: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBone White/Black/Green: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBone White/Black/Green: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum bone-debian-8.6-console-armhf-2016-10-06-2gb* a94c4a4d5e83d42bb1ccca66af040c546da373a2e4140c49331a558964ef2d6e bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bone-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-10-06
- OMAP5432 uEVM: v4.4.23-ti-r51 kernel
- 2016-09-28
- OMAP5432 uEVM: v4.4.22-ti-r48 kernel
- 2016-06-09
- OMAP5432 uEVM: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb* 2671e0822c69015f4f132c4198eb93de323868513d8a6c3b901826b3bb0d6820 omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat omap5-uevm-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
User: debian pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2016-10-06
- BeagleBoard-X15: v4.4.23-ti-r51 kernel
- 2016-09-28
- BeagleBoard-X15: v4.4.22-ti-r48 kernel
- 2016-06-09
- BeagleBoard-X15: v4.4.12-ti-r30 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2016-10-06/microsd/bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Verify Image with:
sha256sum bbx15-debian-8.6-console-armhf-2016-10-06-2gb* c6e9b2be24668165d8e0e3d1a9548cdc12f13d2b4de5dca88f3c4e97641366f8 bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-debian-8.6-console-armhf-2016-10-06-2gb.img.xz | sudo dd of=/dev/sdX
Debian Configuration
Install Latest Kernel Image
General apt syntax for searching and installing a specific kernel:
sudo apt-get update sudo apt-cache search linux-image | grep <branch> sudo apt-get install linux-image-<specific version> sudo reboot
Latest kernel script
cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh <OPTIONS>
3.8.x
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support --bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai --bone-xenomai-channel --stable
4.1.x-ti
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1 Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 --ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT --ti-rt-channel --stable
Mainline (lts)
4.1.x BeagleBone/BeagleBone Black + SGX --bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX --bone-rt-kernel --lts
Mainline
4.3.x BeagleBone/BeagleBone Black --bone-kernel --testing
Debian 8: jessie
sudo apt-get install linux-image-armmp
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.28lts.29
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.1 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade