The BeagleBone Breadboard is designed to provide a simple but productive prototyping space. This prototyping cape is equipped with a patterned prototyping area, two general-purpose LED’s, two tactile switches, one 8-pin female header and two stackable 46-pin connectors. LED’s and switches are mapped to an 8-pin header for convenient access. With each purchase including an adhesive solderless breadboard and jumper wire kit (140 pieces in 14 different lengths), the BeagleBone Breadboard offers users a powerful prototyping tool without the needs of soldering.
The only changes made for this revision are silkscreens. The board of this revision should function identically to the previous revision.
Initial release of BeagleBone Audio Cape.
No software support is required by this board.
Followings are some specifications of the BeagleBone Breadboard:
|Resistors||2x||470 Ohm 1/4W 5%|
|LED's||2x||Green 3mm 20mA 2.12V|
|Switches||2x||Tactile .05A 24V|
Included with each purchase:
|Breadboard||1x||Solderless 170 tie point 1.8" x 1.37"|
|Jumper Wire Kit||140x||14 lengths .1" .2" .3" .4" .5" .6" .7" .8" .9" 1" 2" 3" 4" 5"|
The solder prototyping area on the BeagleBone Breadboard is patterned into rows and columns of connections. At the center of the cape are multiple 3-connection rows separated by 14-connection columns. The far right end of the cape features a series of 2-connection rows. Users can utilized these rows for extra connectors.
The adhesive solderless breadboard features 34 five-connection rows split equally into two sides. The bottom of this breadboard can be peeled and attached onto the solder prototyping area of the BeagleBone Breadboard. In addition to two 46-pin connectors and an 8-pin header, the solderless breadboard provides a complete solderless solution for prototyping BeagleBone.
|Size||2.15" x 3.40"|
No signals are used by this cape.
|Board Name||BeagleBone Breadboard|
- Boardzoo (USA)
- Digi-Key (USA)
- Farnell (UK)
- Lextronic (France)
- Mouser Electronics (USA)
- Special Computing (USA)
- Tigal (Austria)
BeagleBone Breadboard Revision A1
Only PCB is changed in this revision. No design changes are made.
BeagleBone Breadboard Revision A
To download all files at once please click here
To go back to the cape list, please click here