Difference between revisions of "BeagleBoardUbuntu"

From eLinux.org
Jump to: navigation, search
m (Advanced)
m (Method 1: Download a Complete Pre-Configured Image: 2017-01-23)
(One intermediate revision by the same user not shown)
Line 55: Line 55:
  
 
= Method 1: Download a Complete Pre-Configured Image =
 
= Method 1: Download a Complete Pre-Configured Image =
 +
 
== Demo Image ==
 
== Demo Image ==
  
Line 68: Line 69:
 
  ./build_kernel.sh
 
  ./build_kernel.sh
  
=== Ubuntu (16.04.1) ===
+
=== Ubuntu (16.04.2) ===
  
 
Default username/password:
 
Default username/password:
Line 75: Line 76:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
Line 80: Line 91:
 
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
*2016-11-10
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
  
 
Services Active:
 
Services Active:
Line 100: Line 101:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/elinux/ubuntu-16.04.1-console-armhf-2017-01-13.tar.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/elinux/ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum ubuntu-16.04.1-console-armhf-2017-01-13.tar.xz
+
  sha256sum ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
  d222003d3813c1b3a1a90731453e735a9ba7afc19de29c3c72bd7eb71a99eeb6 ubuntu-16.04.1-console-armhf-2017-01-13.tar.xz
+
  8d0088c4842d3cbcacb64bafc74851307d43f55f1d10d17e0a9d1afe7a921e84 ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf ubuntu-16.04.1-console-armhf-2017-01-13.tar.xz
+
  tar xf ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
  cd ubuntu-16.04.1-console-armhf-2017-01-13
+
  cd ubuntu-16.04.2-console-armhf-2017-03-09
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
Line 152: Line 153:
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2017.01 -b tmp
+
  git checkout v2017.03 -b tmp
  
 
Stable:
 
Stable:
Line 162: Line 163:
 
=== eMMC: All BeagleBone Varients with eMMC ===
 
=== eMMC: All BeagleBone Varients with eMMC ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  
 
Script for reference: (this is the script that writes to the eMMC)
 
Script for reference: (this is the script that writes to the eMMC)
Line 177: Line 178:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
 
** All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel
*2016-11-10
 
** All BeagleBone Varients with eMMC: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** All BeagleBone Varients with eMMC: v4.4.23-ti-r51 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/flasher/BBB-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum BBB-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  88f43ea39219da8aa3f3646e637908d011fbff8afbdf1cf115351f36229c9eef BBB-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  5774f6d9aca247dbf46505cde6a439aae56aeb9cd4fa1ac3f46ce2a299851b89 BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 195: Line 196:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat BBB-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
=== eMMC: BeagleBoard-X15 ===
 
=== eMMC: BeagleBoard-X15 ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  
 
Script for reference: (this is the script that writes to the eMMC)
 
Script for reference: (this is the script that writes to the eMMC)
Line 214: Line 215:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
*2016-11-10
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/flasher/bbx15-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  f1ff6ca3fb329dd060079f3814cfc3fa9d12f6a3cf8cc3937b4dc2318d1b60d2 bbx15-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  40f705e93a73dcf44ad4dfd36a806bcbe682ef1303e7a4326ef5947462382582 bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 232: Line 233:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-eMMC-flasher-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== raw microSD img ==
 
== raw microSD img ==
Line 238: Line 239:
 
=== BeagleBoard xM ===
 
=== BeagleBoard xM ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: ubuntu
 
User: ubuntu
Line 250: Line 251:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard xM: v4.9.13-armv7-x4 kernel
 +
*2017-01-23
 +
** BeagleBoard xM: v4.9.5-armv7-x4 kernel
 
*2017-01-13
 
*2017-01-13
 
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
 
** BeagleBoard xM: v4.9.3-armv7-x4 kernel
*2016-11-10
 
** BeagleBoard xM: v4.8.7-armv7-x4 kernel
 
*2016-10-06
 
** BeagleBoard xM: v4.8.0-armv7-x2 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbxm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbxm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  f00018b2ab5bafbd56b8e40fcd9440956b841e4ef12cc0a5df5897a54317d925 bbxm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  cc6c202610430af966db750161f0d57303162def4d169dc4e9c8dbe9d8f88e28 bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 268: Line 269:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbxm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
=== All BeagleBone Varients ===
 
=== All BeagleBone Varients ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: ubuntu
 
User: ubuntu
Line 284: Line 285:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** All BeagleBone Varients: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** All BeagleBone Varients: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
 
** All BeagleBone Varients: v4.4.40-ti-r80 kernel
*2016-11-10
 
** All BeagleBone Varients: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** All BeagleBone Varients: v4.4.23-ti-r51 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bone-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bone-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  d196f5c99998b212d527785a6b2cb4689daa2d0b28d207bc64faa54af9300ef7 bone-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  fe3d2521b8ebaeca79ac5f5885a58ce3e4d93b7cc5adf407870017deae74c813 bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 302: Line 303:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bone-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
=== OMAP5432 uEVM ===
 
=== OMAP5432 uEVM ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: ubuntu
 
User: ubuntu
Line 318: Line 319:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** OMAP5432 uEVM: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** OMAP5432 uEVM: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
 
** OMAP5432 uEVM: v4.4.40-ti-r80 kernel
*2016-11-10
 
** OMAP5432 uEVM: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** OMAP5432 uEVM: v4.4.23-ti-r51 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/omap5-uevm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum omap5-uevm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  684acb885df9f36d08912b18dfa07697a7994ffff5053f5bbe3e0781f0812e15 omap5-uevm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  65a48656354929eb95f1323d8e57f333b15dfccafb0bc56fc5d400afb029f763 omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 336: Line 337:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat omap5-uevm-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
=== BeagleBoard-X15 ===
 
=== BeagleBoard-X15 ===
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: ubuntu
 
User: ubuntu
Line 352: Line 353:
  
 
Image Updated:
 
Image Updated:
 +
*2017-03-09
 +
** BeagleBoard-X15: v4.4.52-ti-r91 kernel
 +
*2017-01-23
 +
** BeagleBoard-X15: v4.4.43-ti-r84 kernel
 
*2017-01-13
 
*2017-01-13
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
 
** BeagleBoard-X15: v4.4.40-ti-r80 kernel
*2016-11-10
 
** BeagleBoard-X15: v4.4.30-ti-r66 kernel
 
*2016-10-06
 
** BeagleBoard-X15: v4.4.23-ti-r51 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-01-13/microsd/bbx15-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-ubuntu-16.04.1-console-armhf-2017-01-13-2gb*
+
  sha256sum bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
  92621c0930a74d8e8ba1298bd7c33add1abaafc30af88f55ee18216360980cf3 bbx15-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz
+
  5ac531de42eee98a118ce496ac0728357300cdb9d7b85038a6ff3c7c5d07af80 bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 370: Line 371:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-ubuntu-16.04.1-console-armhf-2017-01-13-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= Method 2: Use the NetInstall method=
 
= Method 2: Use the NetInstall method=

Revision as of 12:20, 13 March 2017

(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)

This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.

  • For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.

Help

If you need any help:

  • Ubuntu related help:
    • #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
  • When requesting help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Required Beagle Software

Mainline U-Boot:

  • All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Omap Serial Changes

boot.scr/boot.cmd changes:

With 2.6.35:

console=ttyS2,115200n8

With 2.6.36/37+:

console=ttyO2,115200n8

Serial console login: /etc/init/ttyO2.conf

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin/getty 115200 ttyO2

Method 1: Download a Complete Pre-Configured Image

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.9.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Ubuntu (16.04.2)

Default username/password:

  • username: ubuntu
  • password: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
Getty, Serial Port

Default user: ubuntu pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/elinux/ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz

Verify Image with:

sha256sum ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
8d0088c4842d3cbcacb64bafc74851307d43f55f1d10d17e0a9d1afe7a921e84  ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz

Unpack Image:

tar xf ubuntu-16.04.2-console-armhf-2017-03-09.tar.xz
cd ubuntu-16.04.2-console-armhf-2017-03-09

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients with eMMC: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
5774f6d9aca247dbf46505cde6a439aae56aeb9cd4fa1ac3f46ce2a299851b89  BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/flasher/bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
40f705e93a73dcf44ad4dfd36a806bcbe682ef1303e7a4326ef5947462382582  bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard xM: v4.9.13-armv7-x4 kernel
  • 2017-01-23
    • BeagleBoard xM: v4.9.5-armv7-x4 kernel
  • 2017-01-13
    • BeagleBoard xM: v4.9.3-armv7-x4 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
cc6c202610430af966db750161f0d57303162def4d169dc4e9c8dbe9d8f88e28  bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • All BeagleBone Varients: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • All BeagleBone Varients: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • All BeagleBone Varients: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
fe3d2521b8ebaeca79ac5f5885a58ce3e4d93b7cc5adf407870017deae74c813  bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • OMAP5432 uEVM: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • OMAP5432 uEVM: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • OMAP5432 uEVM: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
65a48656354929eb95f1323d8e57f333b15dfccafb0bc56fc5d400afb029f763  omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-03-09
    • BeagleBoard-X15: v4.4.52-ti-r91 kernel
  • 2017-01-23
    • BeagleBoard-X15: v4.4.43-ti-r84 kernel
  • 2017-01-13
    • BeagleBoard-X15: v4.4.40-ti-r80 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-03-09/microsd/bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Verify Image with:

sha256sum bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb*
5ac531de42eee98a118ce496ac0728357300cdb9d7b85038a6ff3c7c5d07af80  bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-ubuntu-16.04.2-console-armhf-2017-03-09-2gb.img.xz | sudo dd of=/dev/sdX

Method 2: Use the NetInstall method

You will need a 1GB/2GB/4GB/8GB SD card or greater.

Standard system : ~700 MB

Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues (anywhere else will be ignored..)

Download the netinstall script:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Currently supported Ubuntu distributions:

--distro oneiric (11.10)
--distro precise-armhf (12.04)
--distro quantal (12.10)
--distro raring (13.04)
--distro saucy (13.10)

Device: <board> selection:

*BeagleBoard Ax/Bx/Cx  - omap3-beagle
*BeagleBoard xMA/B/C   - omap3-beagle-xm
*BeagleBone Ax         - am335x-bone-serial
*BeagleBone (DVI cape) - am335x-bone-video
*BeagleBone Black      - am335x-boneblack
*PandaBoard Ax     - omap4-panda
*PandaBoard A4+    - omap4-panda-a4
*PandaBoard ES     - omap4-panda-es

Installation script for new <board> selection: (slowly migrating all devices to this method)

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>

So for the xM: with quantal:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  • Other Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Place SD card into BeagleBoard and boot:

Configure the network:

usb0: USB net <- (usually the OTG port)
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
wlan0: Wifi <- Your USDB-Wi-Fi device.. 

See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu

Troubleshooting: If booting fails..

  • Hold the user button down to force booting from MMC
  • Upgrade X-loader and U-boot Upgrade X-loader and U-Boot
  • Clear U-boot's Environment Variables in NAND:
nand erase 260000 20000

NetInstall assumptions:

Assume asll <default>'s... Thanks you preseed.conf!!!

Method 3: Manual Install (no automatic scripts)

Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Advanced

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
-ti-xenomai-channel --lts-4_4

Mainline (lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Swapfile

Using a File for Swap Instead of a Partition

On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).

Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.

Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.

Creating a Swapfile

The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:

sudo mkdir -p /var/cache/swap/   
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
sudo chmod 0600 /var/cache/swap/swapfile 
sudo mkswap /var/cache/swap/swapfile 
sudo swapon /var/cache/swap/swapfile 

To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:

/var/cache/swap/swapfile    none    swap    sw    0   0

To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.

Ubuntu Software

Wi-Fi Networking (command line)

/etc/network/interfaces

It is relatively easy to configure a Wi-Fi card from the command line.

You will need to edit the /etc/network/interfaces file. There are several guides available via Google.

This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834

A sample /etc/network/interfaces file for a WPA2 encrypted access point is:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid <NAME OF AP>
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>

Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.

Lightweight window managers

If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.

JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.

Web Apps

Midori

Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29

Surveillance

Motion

If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.

Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.

To make the BeagleBoard automatically start recording on boot, do the following:

  • Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
  • Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
  • motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
  • Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh
/usr/bin/motion -c /etc/motion/motion.conf

This will now launch the motion client as root when you boot up.

Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.

Robotics

ROS

ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.

There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:

http://wiki.ros.org/indigo/Installation/UbuntuARM

Alternatively ROS can be installed from source and is generally easy to do so (although slow).

For more information about ROS, see www.ros.org.