Difference between revisions of "BeagleBone/GeigerCapePrototype"

From eLinux.org
Jump to: navigation, search
(ELC Europe 2012 Presentation)
Line 1: Line 1:
 +
== Introduction ==
 +
 +
{|  border="1" cellspacing="0" cellpadding="4"
 +
|- bgcolor="#c0e0e0"
 +
| '''Name'''
 +
| '''Role'''
 +
|-
 +
| Matt Ranostay
 +
| Backup HW design/Userspace applications/Presenter
 +
|-
 +
| Dimitris Sapountzakis
 +
| HW design
 +
|-
 +
| Pantelis Antoniou
 +
| Cape Manager + DT overlay support
 +
|-
 +
|}
 +
 +
Winner of Beagleboard.org Cape Contest <ref name="cape_winner" />
 +
 
== Design ==
 
== Design ==
  
Line 18: Line 38:
 
There are demo applications available in the links below.
 
There are demo applications available in the links below.
  
Communication with the cape is using Capemanager + DT overlays driver interface (example output below):
+
Communication with the cape is using Pantelis Antoniou's Capemanager + DT overlays driver interface (example output below):
  
 
<pre>
 
<pre>
Line 43: Line 63:
 
'''NOTE:''' These values may change if inductor on future revs is different.
 
'''NOTE:''' These values may change if inductor on future revs is different.
  
{| class="wikitable"
+
{| border="1" cellspacing="0" cellpadding="4"
 +
|- bgcolor="#c0e0e0"
 
| '''Name'''
 
| '''Name'''
 
| '''Status'''
 
| '''Status'''
Line 82: Line 103:
  
 
<references>
 
<references>
<ref name="kernel_tree"> [https://github.com/beagleboard/kernel Beaglebone.org GitHub tree]
+
<ref name="kernel_tree"> [https://github.com/beagleboard/kernel Beaglebone.org GitHub tree] </ref>
<ref name="cape_winner"> [http://beagleboard.org/CapeContest/entries/ Beagleboard.org Cape Contest Winners]
+
<ref name="cape_winner"> [http://beagleboard.org/CapeContest/entries/ Beagleboard.org Cape Contest Winners] </ref>
 
</references>
 
</references>

Revision as of 21:15, 4 February 2013

Introduction

Name Role
Matt Ranostay Backup HW design/Userspace applications/Presenter
Dimitris Sapountzakis HW design
Pantelis Antoniou Cape Manager + DT overlay support

Winner of Beagleboard.org Cape Contest [1]

Design

The Geiger uses a simple circuit design (see references for schematic) and LND-712 tube but the magic is everything is an extension of Beaglebone + AM335x chip:

  • PWM controls the boost converter
  • Analog (AIN) feedback reports back current voltage of boost converter
  • GPIO interrupts for radiations events

Future design work (some in progress):

  • Fix current limiter with op-amps
  • Use resistors that are within spec
  • eCAP support to get rid of pulse extender part of PCB

Software

Geiger Cape kernel support is available in Beagleboard.org GitHub tree[2]. There are demo applications available in the links below.

Communication with the cape is using Pantelis Antoniou's Capemanager + DT overlays driver interface (example output below):

Confirm Cape Manager picked up device
	# cd /sys/devices/ocp.2/bone-cape-geiger.11

	(start running)
	# echo 1 > run

	(power LED turns on and the event LED lights up on a “click”)

Display counts:
	# cat counter
	4344

Display VSENSE (voltage feedback loop) in Millivolts:
	# cat vsense
	538004

Hardware

Tubes Tested

NOTE: These values may change if inductor on future revs is different.

Name Status Duty Percent @ 20kHz
LND-712 Passed 60%
SBM-20 Passed 40%

Multimedia

ELCE 2012 Demo Picture
Video Links
Geiger Cape Sample App
CapeBus + Geiger Cape

ELC Europe 2012 Presentation

Matt Ranostay Beaglebone: The Perfect Telemetry Platform? PDF


Samples X11 + Python demo scripts + Schematic design:

Beaglebone Telemetry Presentation Resources