Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "BeagleBone Black RFID Adaptor Cape"

From eLinux.org
Jump to: navigation, search
(added picture)
Line 60: Line 60:
 
[https://github.com/shengzhao91/RFID_Adaptor_Cape/blob/master/BBB_Rev2/BBB_Cape.brd Eagle Board Layout] <br />
 
[https://github.com/shengzhao91/RFID_Adaptor_Cape/blob/master/BBB_Rev2/BBB_Cape.brd Eagle Board Layout] <br />
 
[https://github.com/shengzhao91/RFID_Adaptor_Cape/tree/master/BBB_Rev2 Gerber Files]
 
[https://github.com/shengzhao91/RFID_Adaptor_Cape/tree/master/BBB_Rev2 Gerber Files]
 +
 +
== Group Picture ==
 +
[[Image:RFIDcapeGroupPicture.jpg|350px|Group Picture. Starting from left Sheng Zhao, Amulya Kattimani, Edwin Flores]]
  
 
== Promo Video ==  
 
== Promo Video ==  

Revision as of 16:21, 26 July 2013

BeagleBone Pin Usage

The RFID adaptor cape is an interface between the Beaglebone Black (BBB) and Texas Instrument's TRF7970ATB, (Multi-Protocol Fully Integrated 13.56-MHz RFID and NFC Transceiver) It allows users to have fully functional RFID and NFC capabilities on the BBB. The adaptor board also features four additional LEDs and a push button.

The communication between the BBB and the TB is via SPI. Since SPI pins are not automatically enabled on BBB, a device tree overlay is used to configure the pins properly for SPI use.


YouTube Video

Official RFID Adaptor Cape Video
Video Streaming with RFID Adaptor Cape


Schematic

RFID Adaptor Cape Schematic RFID Adaptor Cape Layout BeagleBone Pin Usage

Sample Code

Source code: RFID Application on GitHub.
This C application will constantly scan for RFID tags within the vicinity of the reader. Once a tag is detected, its UID will be stored in uid.txt file.

SPI Device Tree Overlay Setup

The following information is slightly modified from BeagleBone Black Enable SPIDEV to suit for the cape.

NOTE: You MUST disable the HDMI interface to use SPI1 to talk to the adaptor cape.
Create a file called BB-SPI1-01-00A0.dts Compile the dtc:

dtc -O dtb -o BB-SPI1-01-00A0.dtbo -b 0 -@ BB-SPI1-01-00A0.dts

Then, copy the file into /lib/firmware/:

cp BB-SPI1-01-00A0.dtbo /lib/firmware/

Then enable the device tree overlay:

echo BB-SPI1-01 > /sys/devices/bone_capemgr.*/slots

Plug in your BBB to a host computer using the mini usb data cable.

Go to My Computer>BeagleBone Getting Started> and open uEnv.txt Copy and paste this command into the .txt file. Make sure to save your changes. (Ctrl+s)

optargs=quiet drm.debug=7 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
capemgr.enable_partno=BB-SPI1-01

Save the changes, reboot Beaglebone Black.
Make sure it is enabled You should now have two spidev-files in the folder /dev/

ls -al /dev/spidev1.0

If you don't see it, you can type the following to manually enable the device tree overlay.

echo BB-SPI1-01 > /sys/devices/bone_capemgr.*/slots

Eagle Files

Eagle Schematic
Eagle Board Layout
Gerber Files

Group Picture

Group Picture. Starting from left Sheng Zhao, Amulya Kattimani, Edwin Flores

Promo Video

Promo Video

References