Difference between revisions of "Beaglebone:Replicape"
Eliasbakken (talk | contribs) m |
Eliasbakken (talk | contribs) (→Mechanical Specifications) |
||
Line 51: | Line 51: | ||
|- | |- | ||
|Layers | |Layers | ||
− | | | + | |4 |
|- | |- | ||
|PCB Thickness | |PCB Thickness | ||
Line 59: | Line 59: | ||
|Yes | |Yes | ||
|} | |} | ||
− | |||
− | |||
− | |||
==EEPROM== | ==EEPROM== |
Revision as of 10:22, 3 July 2017
Contents
Descriptions
Here are the most important specs:
- 5 stepper motor drivers (TMC2100)
- 3 high power MOSFETs for 2 extruders and 1 HPB
- 4 medium power PWM controlled MOSFETs for up to 4 fans/LED strips
- 3 analog input ports for thermistors. Noise-filtered inputs and option for shielding
- 6 inputs for end stops
- 1 bus for Dallas 1W temperature sensor for monitoring the cold end. Up to 10 sensors can be added to the bus.
- Microstepping individually programmable for each SMD from 1 to 256.
- All steppers are controlled by the Programmable Realtime Unit (PRU) for hard real time operation.
- Single 12 to 24V PSU, fans are still 12V.
- Compatible with BeagleBone and BeagleBone Black
- Controllable via Ethernet, USB and Manga Screen
- Rugged connectors and lots of protection makes it ideal for development.
- Open source software written in Python for maintainability and hackability.
- Both hardware, firmware and software are open source under the CC BY-SA licence
Specifications
Electrical Specifications
Power | Input 12..24 Volt. Step down converter (5V) for BB, and 12V for fans/LED strips/solenoids . |
5V via expansion header | |
Indicators | Power, Fuse blown, and 6 for MOSFETs |
Connectors | Power input Extruer 1, 2, HBP |
Mechanical Specifications
Size | 100 x 107 mm |
Layers | 4 |
PCB Thickness | .062" |
RoHS Compliant | Yes |
EEPROM
EEPROM Suport | Yes |
Board Name | Replicape |
Version | 0A4A |
Manufacturer | Designed in Norway by Intelligent Agent AS Produced in the U.S by CircuitCo |
Part Number | 2191 |
Pins Used | 29 |
Documentation
Open Source | Yes |
System Reference Manual | No |
Schematics | Yes |
PCB Files | Yes |
Gerber Files | Yes |
Bills of Materials | Yes |
Vendors
Only thing-printer.com for now.
Manufacturer's Link
http://www.thing-printer.com/product/replicape/
To go back to the cape list, please click BeagleBone Capes