Calamari Lure

From eLinux.org
Jump to: navigation, search

Description

General Information

The Calamari Lure is designed as a demonstration platform for the MinnowBoardMax

Features

  • 2 PWM controlled LEDS
Signal Function PadConf
SIO_PWM_00 LED1 PWM
SIO_PWM_11 LED2 PWM


  • GPIO Output controlled 7 Segment LED display
Signal Function PadConf
GPIO_S5_2 Clock GPIO Output
LPE_I2S2_DATAIN Data GPIO Output
LPE_I2S2_DATAOUT Latch GPIO Output
LPE_I2S2_FRM Clear GPIO Output


  • ADC input using a variable resistor slider potentiometer via a SPI based ADC
Signal Function PadConf
SIO_SPI_CS Chip Select SPI
SIO_SPI_DO Data Out SPI
SIO_SPI_DI Data In SPI
SIO_SPI_CLK Clock SPI


  • 3 GPIO inputs using a buttons
Signal Function PadConf
LPE_I2S2_CLK S1 GPIO Input
SIO_UART1_CTS S2 GPIO Input
SIO_UART1_RTS S3 GPIO Input


  • dual TTL uarts
Signal Function PadConf
SIO_UART1_TX UART1 TX UART
SIO_UART1_RX UART1 RX UART
SIO_UART2_TX UART2 TX UART
SIO_UART2_RX UART2 RX UART


  • RGB GPIO controlled LED
Signal Function PadConf
GPIO_S5_0 RED GPIO Output
GPIO_S5_1 GREEN GPIO Output
ILB_8254_SPKR BLUE GPIO Output


  • I2C EEPROM at 0x50
Signal Function PadConf
SIO_I2C5_DATA I2C Data I2C
SIO_I2C5_CLK I2C Clock I2C


Reference Material



Design

Components

Design Files

Test Files

  • Coming Soon!