Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Devkit8500FAQ"

From eLinux.org
Jump to: navigation, search
(DevKit8500 FAQ)
 
Line 4: Line 4:
  
 
==Why my new bought 7-inch LCD has no display when power on the board?==
 
==Why my new bought 7-inch LCD has no display when power on the board?==
Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User need to change the image for 7-inch LCD. Please follow the document "Devkit8500 Quick User Manual.pdf" included in product DVD. <br>
+
Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User needs to change the image for 7-inch LCD. Please follow the document "Devkit8500 Quick User Manual.pdf" included in product DVD. <br>
 +
 
 +
==Why the touch screen could not be used when getting into WinCE system?==
 +
Answer: When getting into WinCE system, the LCD displays as below, there is no response if using finger to click the center cross. There might be two reasons:
 +
1. The touch screen is resistive touch screen, we suggest user using touch pen to click the center cross not finger;
 +
2. It needs about one second touching for calibration, if touching time is too short, the operation will be invalid.

Revision as of 06:37, 13 December 2011

This page mainly summarizes solutions to some main problems during the development of Embest Devkit8500. Hope it would give you some help.

Hardware problem

Why my new bought 7-inch LCD has no display when power on the board?

Answer: This is a very normal problem. Embest default delivery is preloaded with 4.3-inch LCD image. User needs to change the image for 7-inch LCD. Please follow the document "Devkit8500 Quick User Manual.pdf" included in product DVD.

Why the touch screen could not be used when getting into WinCE system?

Answer: When getting into WinCE system, the LCD displays as below, there is no response if using finger to click the center cross. There might be two reasons: 1. The touch screen is resistive touch screen, we suggest user using touch pen to click the center cross not finger; 2. It needs about one second touching for calibration, if touching time is too short, the operation will be invalid.