Difference between revisions of "EBC Start Here"

From eLinux.org
Jump to: navigation, search
m (You may have, or will have to buy)
m (What you borrow from the Instrument Room: Removed TMP006)
Line 31: Line 31:
 
* various input devices, sensors, displays, etc.
 
* various input devices, sensors, displays, etc.
  
=== What you borrow from the Instrument Room ===
+
=== What you borrow/buy from the Instrument Room ===
 
* Proto Plate with full sized breadboard
 
* Proto Plate with full sized breadboard
 
* 5V power supply
 
* 5V power supply
Line 39: Line 39:
 
* [http://www.adafruit.com/products/902 Bicolor LED Square Pixel Matrix with I2C Backpack]
 
* [http://www.adafruit.com/products/902 Bicolor LED Square Pixel Matrix with I2C Backpack]
 
* Two (2) [http://www.ti.com/product/tmp101 TMP101] temperature sensors
 
* Two (2) [http://www.ti.com/product/tmp101 TMP101] temperature sensors
* [http://www.ti.com/product/tmp006 TMP006] Infrared Thermopile Sensor (too small to mount, we won't use this)
 
 
* [http://www.ti.com/product/pca9306 PCA9306 Dual Bi-Directional I2C-Bus and SMBus Voltage Level-Translator]
 
* [http://www.ti.com/product/pca9306 PCA9306 Dual Bi-Directional I2C-Bus and SMBus Voltage Level-Translator]
 
* [http://www.ti.com/product/l293 L293 Quadruple Half-H Drivers]
 
* [http://www.ti.com/product/l293 L293 Quadruple Half-H Drivers]

Revision as of 10:23, 22 July 2014

thumb‎ Embedded Linux Class by Mark A. Yoder

Openlogo-50.png


Overview

There are three major things that need to be done to have the BeagleBoard ready to run for class:

  1. Get your Beagle Hardware together
  2. Set up a host computer, running Linux for code development
  3. Clone the course git repository on both the Beagle and the host

The Hardware

Here's the hardware you will need and where you get it.

You may have, or will have to buy

We are using the BeagleBone Black this year. Since it's only $45-$55 I'll have you buy your own. There are a few other things you will need to get before the first day of class.

  • BeagleBone Black. See http://beagleboard.org/ for suggestions of where to buy the Black. I suggest ordering sooner rather than later since it may take a couple of weeks.
  • USB keyboard and mouse
  • HDMI display
  • At least three 4G micro SD cards. I suggest you have 3 or 4 cards since it's easy to mess up one and it takes some 10 minutes to reload it.
  • micro SD card reader/writer
  • Powered USB hub, at least 4 ports. The Black has only one USB port so this will allow you to plug in the keyboard, mouse, web cam, etc.

Books

  • Embedded Linux Primer The bookstore will have this.
  • The BeagleBone Cookbook. It's being written at this time, so it won't be easy to find.

What you buy from the Instrument Room

  • various input devices, sensors, displays, etc.

What you borrow/buy from the Instrument Room

The Linux host computer

The above will get you ready for about the first 4 weeks of class. Around week 5 we'll start looking at the kernel and will need to cross compile. Once we start moving into Kernel development we will need a host computer. Since we are doing Linux development, it's generally agreed the host should be running Linux. I suggest you run Ubuntu 12.04 (LTS). The CSSE department has a local copy so you don't have to download some 700M. You want the desktop-amd64.iso if you have a 64-bit machine, or the desktop-i386.iso if you are running 32-bits.

There are three options as to how to run Linux.

  1. Native install ([1])
  2. Install in a virtual machine. I've been running Virtual Box recently and it seems to work fine. You can also try VMware Player.
  3. Run in the cloud

The Ubuntu site gives good instructions for a native install. I've had good success with running both VMware and Virtual Box, though my installation instructions are a bit dated. (Feel free to update them if they need it.)

I've been testing out the "Cloud" approach and it looks like it will work too. If you want to try the cloud, let me known and I'll ask CSSE to set up a machine for you.

Kernel Development

Once you have Linux running somewhere, you need to install the kernel development tools. Go to EBC Exercise 08 Installing Development Tools to see all the steps you need.

Now that you have all these pieces in place you are ready to work with a very powerful embedded processor.

The class git repository

Once you have an up to date OS running on your Beagle, go to EBC Exercise 05 Getting Exercise Support Materials to learn how to clone the class git repository. Once cloned it's a single command to get the latest materials on your Beagle (or host computer for that matter).

thumb‎ Embedded Linux Class by Mark A. Yoder