Difference between revisions of "ECE497 Tips and Tricks"
m |
AndruWitta (talk | contribs) m (Changed incorrect use of 'to' to correct use of 'two' - makes statement clearer) |
||
(35 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
[[Category:ECE497 |Tips]] | [[Category:ECE497 |Tips]] | ||
+ | [[Category:ECE597 |Tips]] | ||
{{YoderHead}} | {{YoderHead}} | ||
Line 8: | Line 9: | ||
Since we are working with the open source community, you need to know where the action is. Here are some useful links to what's happening in the Beagle community. | Since we are working with the open source community, you need to know where the action is. Here are some useful links to what's happening in the Beagle community. | ||
− | * [http:// | + | * [http://lug.rose-hulman.edu/wiki/Main_Page Rose-Hulman Linux Users Group wiki] |
+ | * [http://learn.adafruit.com/category/beaglebone Adafruit's BeagleBone] site. | ||
+ | * [https://learn.sparkfun.com/tutorials/tags/beaglebone SparkFun's Beagle] tutorials. | ||
* [http://BeagleBoard.org BeagleBoard.org], the starting point for all thing Beagle. | * [http://BeagleBoard.org BeagleBoard.org], the starting point for all thing Beagle. | ||
* [http://groups.google.com/group/beagleboard Beagle Discussion Group], lot's of good information here, but you'll have to dig a bit. Subscribe and follow the discussion. | * [http://groups.google.com/group/beagleboard Beagle Discussion Group], lot's of good information here, but you'll have to dig a bit. Subscribe and follow the discussion. | ||
− | * [http://beagleboard. | + | * [http://beagleboard.org/blog blog], see what is being said about the Beagle. |
* [http://elinux.org/BeagleBoard eLinux], this is where this page is being hosted. It's about embedded Linux in general, not just the BeagleBoard. | * [http://elinux.org/BeagleBoard eLinux], this is where this page is being hosted. It's about embedded Linux in general, not just the BeagleBoard. | ||
− | * [http://free-electrons.com/ | + | * [http://free-electrons.com/docs/ Free Electrons], some good labs about what makes embedded Linux run. |
* [https://gforge.ti.com/gf/project/tiesr/ TI Embedded Speech Recognizer] (TIesr) is a fixed-point recognizer written in C++ and C. | * [https://gforge.ti.com/gf/project/tiesr/ TI Embedded Speech Recognizer] (TIesr) is a fixed-point recognizer written in C++ and C. | ||
* [http://code.google.com/soc/ Google Summer of Code]. BeagleBoard is an accepted organization. | * [http://code.google.com/soc/ Google Summer of Code]. BeagleBoard is an accepted organization. | ||
Line 33: | Line 36: | ||
|- | |- | ||
| | | | ||
− | + | host$ '''gnome-open''' | |
| Open a file or directory using the default program | | Open a file or directory using the default program | ||
|- | |- | ||
| Give the IP address a name | | Give the IP address a name | ||
| Inside /etc/hosts add a line of the form <IP address> <alias> this will allow you to refer to the host by name. | | Inside /etc/hosts add a line of the form <IP address> <alias> this will allow you to refer to the host by name. | ||
− | |||
− | |||
− | |||
|- | |- | ||
| | | | ||
Line 95: | Line 95: | ||
==== ssh and X-windows ==== | ==== ssh and X-windows ==== | ||
− | When using ssh between | + | When using ssh between two X-windows systems try |
host$ '''ssh -CX root@beagle''' | host$ '''ssh -CX root@beagle''' | ||
Line 106: | Line 106: | ||
You can run a vnc server on the Beagle. Install it with: | You can run a vnc server on the Beagle. Install it with: | ||
− | beagle$ ''' | + | beagle$ '''apt-get update''' |
− | beagle$ ''' | + | beagle$ '''apt-get install x11vnc''' |
Install a password with | Install a password with | ||
beagle$ '''x11vnc -storepasswd''' | beagle$ '''x11vnc -storepasswd''' | ||
Line 113: | Line 113: | ||
beagle$ '''x11vnc -display :0 -ssl -usepw -forever -q &''' | beagle$ '''x11vnc -display :0 -ssl -usepw -forever -q &''' | ||
On your host, connect to it with: | On your host, connect to it with: | ||
− | + | ||
− | + | '''Applications:Internet:Remote Desktop Viewer''' | |
==== Authorizing ssh ==== | ==== Authorizing ssh ==== | ||
Line 131: | Line 131: | ||
host$ '''ssh-copy-id root@beagle''' | host$ '''ssh-copy-id root@beagle''' | ||
− | It | + | It will ask for your beagle password and then copy the needed files to it. |
* Back on the beagle to see what has changed: | * Back on the beagle to see what has changed: | ||
Line 183: | Line 183: | ||
host$ '''cd ~''' | host$ '''cd ~''' | ||
host$ '''sudo umount dfs-home''' | host$ '''sudo umount dfs-home''' | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=== byobu - A Screen Manager === | === byobu - A Screen Manager === | ||
Line 259: | Line 188: | ||
For years Unix has had <code>screen</code> which is a screen manager. ''byobu'' is wrapper for screen that puts a nice face on it. You can run byobu on your host computer and on the Beagle. With byobu you can start a long running program (bitbake for example) in one terminal and detach from the terminal and the program will keeping running in the background. Using byobu you can later attach to the program (possibly from another terminal) and see how the program is progressing. | For years Unix has had <code>screen</code> which is a screen manager. ''byobu'' is wrapper for screen that puts a nice face on it. You can run byobu on your host computer and on the Beagle. With byobu you can start a long running program (bitbake for example) in one terminal and detach from the terminal and the program will keeping running in the background. Using byobu you can later attach to the program (possibly from another terminal) and see how the program is progressing. | ||
− | Install byobu | + | Install byobu with: |
host$ '''sudo apt-get update''' | host$ '''sudo apt-get update''' | ||
host$ '''sudo apt-get install byobu''' | host$ '''sudo apt-get install byobu''' | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Now you can run it. | Now you can run it. | ||
Line 284: | Line 198: | ||
You'll see a command prompt. You'll also see some status information on the bottom two lines. Type Ctrl-A ? for help. Type Ctrl-A Ctrl-D to detach from the session. Running byobu again will reattach you to the session. Try running byobu in two windows at the same time. You should see the same session in both. | You'll see a command prompt. You'll also see some status information on the bottom two lines. Type Ctrl-A ? for help. Type Ctrl-A Ctrl-D to detach from the session. Running byobu again will reattach you to the session. Try running byobu in two windows at the same time. You should see the same session in both. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=== Backing up an SD card with dd === | === Backing up an SD card with dd === | ||
Line 306: | Line 214: | ||
It took 16 minutes. The file size is 454M compared to 628M. Wow, faster and smaller. | It took 16 minutes. The file size is 454M compared to 628M. Wow, faster and smaller. | ||
− | |||
− | |||
− | |||
− | |||
=== Local Ubuntu Update Mirror === | === Local Ubuntu Update Mirror === | ||
Line 317: | Line 221: | ||
We host a local mirror for all ubuntu updates. This is from the current distro back to hardy; it hosts every distro that ubuntu currently supports. | We host a local mirror for all ubuntu updates. This is from the current distro back to hardy; it hosts every distro that ubuntu currently supports. | ||
− | In order to get your system to point to our mirror | + | In order to get your system to point to our mirror follow the directions [https://local.rose-hulman.edu/academicaffairs/csse/Wiki/Ubuntu/update.aspx here]. |
+ | |||
+ | === Using pico DLP with BBB === | ||
+ | |||
+ | Put this in uEnv.txt to use the BBB with a pico DLP. | ||
+ | optargs=video=HDMI-A-1:640x480@60 | ||
+ | |||
+ | === systemd journal taking too much time/space === | ||
− | + | If you are running out of space because of the systemd journal try [https://groups.google.com/forum/#!searchin/beagleboard/systemd-journal/beagleboard/1NguS-SK-G8/NGhAVlTerkkJ this Google Group Suggestion] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | === Getting the BeagleBone to work with unusual network managers === | |
− | + | If you plugged in your BeagleBone, but you just can't get it to pop up a page at 192.168.7.2 (aka your browser says "could not connect" or "time out"), then the following steps should help. | |
− | |||
− | + | First run | |
− | + | host$ ip a | |
+ | |||
+ | This will list a bunch of network interfaces. You should see one that looks odd and long like | ||
+ | enp0s29u1u5 | ||
− | + | That is the interface for the BeagleBone. Now, to get the BeagleBone to communicate with your host over USB serial, run | |
+ | host$ sudo dhcpcd enp0s29u1u5 | ||
− | + | If this is successful, you should see your interface in the output of the command below. Its state should be UP. | |
+ | host$ ifconfig | ||
== Windows == | == Windows == | ||
Line 355: | Line 263: | ||
[http://notepad-plus-plus.org/ Notepad++] is a nice text editor for Windows. | [http://notepad-plus-plus.org/ Notepad++] is a nice text editor for Windows. | ||
− | == | + | ==Mac OS X== |
+ | ===Mounting the BeagleBone filesystem locally=== | ||
+ | |||
− | + | 1. Download and install OSXFUSE and SSHFS from [http://osxfuse.github.io/ github official page] in the respective order. | |
− | |||
− | + | 2. In Terminal do | |
− | + | host$ '''mkdir /Volumes/Beagle''' | |
− | + | host$ '''sshfs root@beagleIPaddr:/ /Volumes/Beagle''' | |
− | + | ||
+ | == Set up on the BeagleBoard == | ||
=== Accessing the Beagle via the Serial Port === | === Accessing the Beagle via the Serial Port === | ||
Line 376: | Line 286: | ||
* On my host, '''/dev/ttyUSB1''' appeared. On the host computer run | * On my host, '''/dev/ttyUSB1''' appeared. On the host computer run | ||
− | host$ ''' | + | host$ '''screen /dev/ttyUSB''1'' 115200''' |
where '''ttyUSB1''' is what appeared when you plugged in your converter. | where '''ttyUSB1''' is what appeared when you plugged in your converter. | ||
Line 385: | Line 295: | ||
'''Tip 1''': Ctrl-a H will cause the data on the serial port to be logged. See | '''Tip 1''': Ctrl-a H will cause the data on the serial port to be logged. See | ||
− | host$ '''man | + | host$ '''man screen''' |
for help. | for help. | ||
'''Tip 2''': <F6> will disconnect from the session. You can reconnect later. | '''Tip 2''': <F6> will disconnect from the session. You can reconnect later. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=== Setup a USB Wireless Device on Beagle === | === Setup a USB Wireless Device on Beagle === | ||
Line 579: | Line 367: | ||
This ifdown ifup method has worked every time for me so far but if anyone can find a way to prevent having to do this almost every time please feel free to edit this | This ifdown ifup method has worked every time for me so far but if anyone can find a way to prevent having to do this almost every time please feel free to edit this | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Fixing Problems == | == Fixing Problems == | ||
Line 621: | Line 385: | ||
This suggestion came from this [http://groups.google.com/group/beagleboard/browse_thread/thread/d23c15e3c9fcb8fc posting]. | This suggestion came from this [http://groups.google.com/group/beagleboard/browse_thread/thread/d23c15e3c9fcb8fc posting]. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Getting help from a news group == | == Getting help from a news group == |
Revision as of 18:42, 3 December 2016
Embedded Linux Class by Mark A. Yoder
Some useful tips and tricks for Linux and the Beagleboard.
Contents
- 1 Interesting Links
- 2 Linux
- 2.1 Quick Tips
- 2.2 Connecting to RHIT wifi
- 2.3 bash
- 2.4 ssh
- 2.5 Mounting dfs/afs
- 2.6 byobu - A Screen Manager
- 2.7 Backing up an SD card with dd
- 2.8 Local Ubuntu Update Mirror
- 2.9 Using pico DLP with BBB
- 2.10 systemd journal taking too much time/space
- 2.11 Getting the BeagleBone to work with unusual network managers
- 3 Windows
- 4 Mac OS X
- 5 Set up on the BeagleBoard
- 6 Fixing Problems
- 7 Getting help from a news group
Interesting Links
Since we are working with the open source community, you need to know where the action is. Here are some useful links to what's happening in the Beagle community.
- Rose-Hulman Linux Users Group wiki
- Adafruit's BeagleBone site.
- SparkFun's Beagle tutorials.
- BeagleBoard.org, the starting point for all thing Beagle.
- Beagle Discussion Group, lot's of good information here, but you'll have to dig a bit. Subscribe and follow the discussion.
- blog, see what is being said about the Beagle.
- eLinux, this is where this page is being hosted. It's about embedded Linux in general, not just the BeagleBoard.
- Free Electrons, some good labs about what makes embedded Linux run.
- TI Embedded Speech Recognizer (TIesr) is a fixed-point recognizer written in C++ and C.
- Google Summer of Code. BeagleBoard is an accepted organization.
- Linux Kernel Map
- Texas Instruments Embedded Processors Wiki
Linux
Learn UNIX in 10 Minutes is a quick overview of the most commonly used Linux commands.
Top 10 Tools is a nice summary of 10 of the most useful Linux commands.
Quick Tips
Tip | Description |
---|---|
host$ gnome-open |
Open a file or directory using the default program |
Give the IP address a name | Inside /etc/hosts add a line of the form <IP address> <alias> this will allow you to refer to the host by name. |
beagle$ ntpdate ntp.org beagle$ rm /etc/localtime beagle$ ln -s /usr/share/zoneinfo/America/New_York /etc/localtime |
This will go to a network time protocol server and get the current time and set the Beagle to it and set the local time zone. [1] |
beagle$ mount -t debugfs debugfs /sys/kernel/debug/ beagle$ cd /sys/kernel/debug beagle$ ls |
Kernel Debug Info |
Connecting to RHIT wifi
There is a discussion in the Beagle Google Group about getting wireless working with the bone.
Use these settings for connecting to the Rose-Hulman wireless network:
- SSID: RHIT-1X
- Security: WPA & WPA2 Enterprise
- Leave "anonymous identity" blank
- CA Certificate: (None)
- PEAP version: Version 0
- Inner authentication: MSCHAPv2
- Use your Rose username and password
bash
Tip | Description |
---|---|
Ctrl-r | Reverse incremental search |
Ctrl-g | Abort command |
Esc-. | Insert last argument from last command |
ssh
Suspending ssh
Most programs can be suspended by typing ^z
(Ctrl-z). If you have an ssh connection to another machine you can suspend it by entering ~^z
. You can resume the connection by entering fg.
ssh and X-windows
When using ssh between two X-windows systems try
host$ ssh -CX root@beagle
The -X set the DISPLAY variable on the remote machine so you can open windows from the beagle on your host machine.
The -C compressed the data over the link. Good for slow connections.
vnc
You can run a vnc server on the Beagle. Install it with:
beagle$ apt-get update beagle$ apt-get install x11vnc
Install a password with
beagle$ x11vnc -storepasswd
Run it on the Beagle with
beagle$ x11vnc -display :0 -ssl -usepw -forever -q &
On your host, connect to it with:
Applications:Internet:Remote Desktop Viewer
Authorizing ssh
ssh and scp can be set up for automatic authorization so you don't have to enter your password when using these commands. Here's how to do it. First let's see what's already there:
- On your Beagle run
beagle$ ls ~/.ssh
~/.ssh may not exist, if not, it will be created. If it's there, check the files in it.
- On your host computer run
host$ ssh-copy-id root@beagle
It will ask for your beagle password and then copy the needed files to it.
- Back on the beagle to see what has changed:
host$ ssh -CX root@beagle beagle$ ls ~/.ssh
The ssh command shouldn't ask for a password. What new files appeared?
ssh configuration
Here's a nice tip so you don't have to remember who to login as on the beagle. On your host, put the following in ~/.ssh/config.
Host beagle User root UserKnownHostsFile /dev/null StrictHostKeyChecking no
Before you had to
host$ ssh -CX root@beagle
Now you can just
host$ ssh -CX beagle
Mounting dfs/afs
You can set up your Linux box to directly mount your afs and dfs files. The Rose-Hulman Linux Users' Group has a nice page with the details .
After installing sshfs
I added the following to my /etc/fstab
file:
sshfs#username@dfs.Rose-hulman.edu:/DFS/MyDocs/username /home/username/MyDocs fuse user,noauto,uid=1000,gid=1000 0 0 sshfs#username@dfs.rose-hulman.edu:/DFS/Users/Y/username /home/username/dfs-home fuse user,noauto,uid=1000,gid=1000 0 0 sshfs#username@afs.rose-hulman.edu: /home/username/afs-home fuse user,noauto,uid=1000,gid=1000 0 0
You'll have to replace username
with your login name. Then create the mount points:
host$ cd ~ host$ mkdir MyDocs host$ mkdir dfs-home host$ mkdir afs-home
Now you can mount your files by using:
host$ cd ~ host$ mount dfs-home host$ cd dfs-home host$ ls
You should now see your dfs files. You can unmount using:
host$ cd ~ host$ sudo umount dfs-home
byobu - A Screen Manager
For years Unix has had screen
which is a screen manager. byobu is wrapper for screen that puts a nice face on it. You can run byobu on your host computer and on the Beagle. With byobu you can start a long running program (bitbake for example) in one terminal and detach from the terminal and the program will keeping running in the background. Using byobu you can later attach to the program (possibly from another terminal) and see how the program is progressing.
Install byobu with:
host$ sudo apt-get update host$ sudo apt-get install byobu
Now you can run it.
beagle$ byobu
You'll see a command prompt. You'll also see some status information on the bottom two lines. Type Ctrl-A ? for help. Type Ctrl-A Ctrl-D to detach from the session. Running byobu again will reattach you to the session. Try running byobu in two windows at the same time. You should see the same session in both.
Backing up an SD card with dd
Here's the command I use to backup an SD card. I use System:Administration:Disk Utility to figure out the path to the card. In this case it's /dev/sdc
host$ sudo time dd if=/dev/sdc of=FIE2011.img bs=4M count=1000 host$ sudo chown yoder:yoder FIE2011.img host$ md5sum FIE2011.img > FIE2011.img.md5 host$ bzip2 -k FIE2011.img
It takes about 5 minutes to dd a 4G card, 1.2 minutes for md5 and bzip2 takes about 23 minutes.
It looks like the 7z compression is becoming popular. Use it via
host$ 7za a FIE2011.img.7z IFE2011.img
It took 16 minutes. The file size is 454M compared to 628M. Wow, faster and smaller.
Local Ubuntu Update Mirror
Darryl Mouck in CSSE has passed this on...
We host a local mirror for all ubuntu updates. This is from the current distro back to hardy; it hosts every distro that ubuntu currently supports.
In order to get your system to point to our mirror follow the directions here.
Using pico DLP with BBB
Put this in uEnv.txt to use the BBB with a pico DLP.
optargs=video=HDMI-A-1:640x480@60
systemd journal taking too much time/space
If you are running out of space because of the systemd journal try this Google Group Suggestion
Getting the BeagleBone to work with unusual network managers
If you plugged in your BeagleBone, but you just can't get it to pop up a page at 192.168.7.2 (aka your browser says "could not connect" or "time out"), then the following steps should help.
First run
host$ ip a
This will list a bunch of network interfaces. You should see one that looks odd and long like
enp0s29u1u5
That is the interface for the BeagleBone. Now, to get the BeagleBone to communicate with your host over USB serial, run
host$ sudo dhcpcd enp0s29u1u5
If this is successful, you should see your interface in the output of the command below. Its state should be UP.
host$ ifconfig
Windows
Most of the work is done under Linux; however there are some handy Windows-based tools.
Serial Port
SecureCRT is a good program that gives you both access to a serial port and is also an ssh client. Rose has a license for SecureCRT.
Tera Term also gives you access to the serial port and it's free.
Notepad++
Notepad++ is a nice text editor for Windows.
Mac OS X
Mounting the BeagleBone filesystem locally
1. Download and install OSXFUSE and SSHFS from github official page in the respective order.
2. In Terminal do
host$ mkdir /Volumes/Beagle host$ sshfs root@beagleIPaddr:/ /Volumes/Beagle
Set up on the BeagleBoard
Accessing the Beagle via the Serial Port
During boot up the Beagle logs various messages on the serial port. You can see these messages by:
- See what USB/tty devices are already attached to your host
host$ ls /dev/ttyU*
- Attach a serial to USB converter to your host computer and the Beagle's serial port.
- See what new USB/tty devices appeared
host$ ls /dev/ttyU*
- On my host, /dev/ttyUSB1 appeared. On the host computer run
host$ screen /dev/ttyUSB1 115200
where ttyUSB1 is what appeared when you plugged in your converter.
You are now talking to your Beagle's serial port. Login quickly. There appears to be a bug that makes garbage appear on your screen if you wait too long. Try
beagle$ shutdown -r now
You will see the shutdown messages, followed by the U-boot messages. After a 3 second (or so) delay you will see the kernel booting.
Tip 1: Ctrl-a H will cause the data on the serial port to be logged. See
host$ man screen
for help.
Tip 2: <F6> will disconnect from the session. You can reconnect later.
Setup a USB Wireless Device on Beagle
(Here are instructions on setting up a Belkin USB dongle.)
The device I used to setup a wireless connection on the Beagle Board was the Linksys Compact Wireless-G USB Network Adapter with SpeedBooster.
I first opened the wpa_supplicant.conf file to setup my networks:
beagle$ cd /etc beagle$ gedit wpa_supplicant.conf &
This file is filled with numerous examples of possible wireless configurations for you to basically fill in. After looking at the examples, I scrolled down to the bottom of the page and set up two networks: one for home and one for school. Here are examples of my setup networks:
#Home Network network={ ssid="YourHomeNetworkName" psk="YourHomeNetworkPassword" } #School Network network={ ssid="RHIT-1X" proto=WPA key_mgmt=WPA-EAP pairwise=CCMP group=TKIP eap=PEAP phase1="peapver=0 peaplabel=0" phase2="auth=MSCHAPV2" scan_ssid=1 identity="YourSchoolUsername" password="YourSchoolPassword" }
For the network examples above,the quotation marks actually belong there but replace the Your.... areas with your corresponding information. No <space> before the first quotation mark.When finished editing save and exit this file. The information for the RHIT school network was found here:RHLUG
Now you must specify that this is the file to use for the wireless device:
beagle$ cd network beagle$ gedit interfaces &
This file will display all of the different types of Internet connections you have setup. To use the wpa_supplicant.conf file, scroll down to around line 42 of the code and uncomment the configuration for wpasupplicant. After doing this make sure all of the above lines mentioning anything about wlan0 are commented out. Return back to where it says "iface wlan0 inet dhcp" that you uncommented around line 42. Add "auto wlan0" above this line, make sure the line "wpa-conf /etc/wpa_supplicant.conf" is uncommented below the iface line, and change the wpa-driver line below that line to wext. So after all of that the code in this file for the wireless device should be the following:
auto wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant.conf wpa-driver wext
NOTE: the auto wlan0 command in this file means that this device will load at boot time. You can take the time in here now to comment out any interfaces you don't use like auto usb0 to make these devices not load at boot time, which will increase the speed at which you boot up. Save and exit this file
Once you have finished this you can either restart the Beagle Board or:
beagle$ cd beagle$ /etc/init.d/networking restart
I've found that a lot of the time the interface doesn't receive an IP address when it boots up. If you run ifconfig in the terminal you should see your wireless device connected to a network. If it is connected but no IP address I do the following:
beagle$ ifdown wlan0 # it will report messages here and then beagle$ ifup wlan0 # more messages and it should report connecting and having an IP address
This ifdown ifup method has worked every time for me so far but if anyone can find a way to prevent having to do this almost every time please feel free to edit this
Fixing Problems
Kernel Boot Problems
Here is a link with some suggestions of what to do if your kernel isn't booting properly.
Serial port garbage
If you are having trouble with garbage on the console, this might help. Sometimes the serial port times out. Most of the time it just generates some junk which can be cleared with CTRL-U or backspace. However, if it happens at the login prompt then getty thinks the terminal is 7-bit with parity (rather than 8-bit raw). If this happens and you continue to login the whole session appears to be scrambled - if you press CTRL-D you can login again provided you don't stop typing... :]
I have simply added the following two lines to root's .profile
:
stty -parenb -parodd cs8 -inpck -istrip echo 0 > /sys/class/tty/ttyS2/device/sleep_timeout
A better fix would probably be to just add the second line to a rc.d startup script somewhere.
This suggestion came from this posting.
Getting help from a news group
Here's a nice tip on what to do before posting a question to a news group.
Embedded Linux Class by Mark A. Yoder