Difference between revisions of "Flameman/dht-walnut/proof"

From eLinux.org
Jump to: navigation, search
(no working ide, dht-walnut)
(no working ide, dht-walnut, ramrootfs (ide is ok for linux))
Line 475: Line 475:
 
   M  e  s  s  a  g  e      O  f      T  h  e      D  a  y
 
   M  e  s  s  a  g  e      O  f      T  h  e      D  a  y
 
   i  n  s  e  r  t    c  o  i  n  s    p  l  e  a  s  e                                             
 
   i  n  s  e  r  t    c  o  i  n  s    p  l  e  a  s  e                                             
uc-earlyrootfs ~ # dmesg
 
Linux version 2.6.15.4-sliding-snow-leopard-dht-walnut-ppc405 (root@minerva) (gcc version 4.1.2) #52 Fri Jul 10 11:25:34 CEST 2009
 
IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)
 
On node 0 totalpages: 8192
 
  DMA zone: 8192 pages, LIFO batch:1
 
  DMA32 zone: 0 pages, LIFO batch:0
 
  Normal zone: 0 pages, LIFO batch:0
 
  HighMem zone: 0 pages, LIFO batch:0
 
Built 1 zonelists
 
Kernel command line: console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash
 
PID hash table entries: 256 (order: 8, 4096 bytes)
 
Warning: real time clock seems stuck!
 
Console: colour dummy device 80x25
 
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 
Memory: 26880k available (1932k kernel code, 604k data, 2992k init, 0k highmem)
 
Calibrating delay loop... 532.48 BogoMIPS (lpj=1064960)
 
Mount-cache hash table entries: 512
 
NET: Registered protocol family 16
 
PCI: Probing PCI hardware
 
PCI: Cannot allocate resource region 5 of device 0000:00:04.0
 
fuse init (API version 7.3)
 
Initializing Cryptographic API
 
io scheduler noop registered
 
io scheduler anticipatory registered
 
io scheduler deadline registered
 
io scheduler cfq registered
 
Generic RTC Driver v1.07
 
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
 
serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
 
serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
 
loop: loaded (max 8 devices)
 
PPC 4xx OCP EMAC driver, version 3.54
 
mal0: initialized, 1 TX channels, 1 RX channels
 
eth0: emac0, MAC de:ad:be:ef:de:ad
 
eth0: found Generic MII PHY (0x09)
 
tun: Universal TUN/TAP device driver, 1.6
 
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 
PDC20265: IDE controller at PCI slot 0000:00:04.0
 
PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
 
PDC20265: chipset revision 2
 
PDC20265: not 100% native mode: will probe irqs later
 
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
 
    ide0: BM-DMA at 0x6800-0x6807, BIOS settings: hda:pio, hdb:pio
 
    ide1: BM-DMA at 0x6808-0x680f, BIOS settings: hdc:pio, hdd:DMA
 
Probing IDE interface ide0...
 
hdb: LEXAR ATA_FLASH, CFA DISK drive
 
hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
 
hdb: set_drive_speed_status: error=0x04 { DriveStatusError }
 
ide0 at 0x1f0-0x1f7,0x3f6 on irq 31
 
Probing IDE interface ide1...
 
Probing IDE interface ide1...
 
hdb: max request size: 128KiB
 
hdb: 15744 sectors (8 MB) w/1KiB Cache, CHS=246/2/32
 
hdb: cache flushes not supported
 
hdb: [mac] hdb1 hdb2 hdb3
 
I2O subsystem v1.288
 
i2o: max drivers = 8
 
I2O ProcFS OSM v1.145
 
NET: Registered protocol family 2
 
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
 
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
 
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 
TCP: Hash tables configured (established 2048 bind 2048)
 
TCP reno registered
 
TCP bic registered
 
NET: Registered protocol family 1
 
NET: Registered protocol family 17
 
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 
All bugs added by David S. Miller <davem@redhat.com>
 
Freeing unused kernel memory: 2992k init
 
eth0: link is up, 100 FDX
 
 
uc-earlyrootfs ~ #  
 
uc-earlyrootfs ~ #  
 
</pre>
 
</pre>

Revision as of 10:31, 16 July 2009


new-firmware

uboot-2009

no working ide, dht-walnut


U-Boot 2009.06-00298-g3672cd5-dirty (Jul 13 2009 - 19:05:51)

CPU:   AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz)
       Internal PCI arbiter enabled, PCI async ext clock used
       16 kB I-Cache 8 kB D-Cache
Board: DHT Walnut - IBM PPC405GP Board
I2C:   ready
DRAM:  32 MB
FLASH: 512 kB
PCI:   Bus Dev VenId DevId Class Int
        00  04  105a  0d30  0101  1d
Net:   ppc_4xx_eth0
IDE:   Bus 0: ............................................................** Timeout **

=> help ide
ide - IDE sub-system

Usage:
ide reset - reset IDE controller
ide info  - show available IDE devices
ide device [dev] - show or set current device
ide part [dev] - print partition table of one or all IDE devices
ide read  addr blk# cnt
ide write addr blk# cnt - read/write `cnt' blocks starting at block `blk#'
    to/from memory address `addr'

=> ide info

IDE device 0: device type unknown
IDE device 1: device type unknown
=> pci
Scanning PCI devices on bus 0
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
_____________________________________________________________
00.00.00   0x1014     0x0156     Bridge device           0x00
00.04.00   0x105a     0x0d30     Mass storage controller 0x01
=> help pci
pci - list and access PCI Configuration Space

Usage:
pci [bus] [long]
    - short or long list of PCI devices on bus 'bus'
pci header b.d.f
    - show header of PCI device 'bus.device.function'
pci display[.b, .w, .l] b.d.f [address] [# of objects]
    - display PCI configuration space (CFG)
pci next[.b, .w, .l] b.d.f address
    - modify, read and keep CFG address
pci modify[.b, .w, .l] b.d.f address
    -  modify, auto increment CFG address
pci write[.b, .w, .l] b.d.f address value
    - write to CFG address
=> pci header 00.04.00
  vendor ID =                   0x105a
  device ID =                   0x0d30
  command register =            0x0004
  status register =             0x0210
  revision ID =                 0x02
  class code =                  0x01 (Mass storage controller)
  sub class code =              0x01
  programming interface =       0x8a
  cache line =                  0x00
  latency time =                0x40
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000000
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00006801
  base address 5 =              0x00000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x105a
  sub system ID =               0x4d33
  expansion ROM base address =  0x000dc000
  interrupt line =              0x1d
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00
=> pci display 00.04.00
00000000: 0d30105a 02100004 01018a02 00004000
00000010: 00000000 00000000 00000000 00000000
00000020: 00006801 00000000 00000000 4d33105a
00000030: 000dc000 00000058 00000000 0000011d
=> pci lo� �ong
Scanning PCI devices on bus 0

Found PCI device 00.00.00:
  vendor ID =                   0x1014
  device ID =                   0x0156
  command register =            0x0006
  status register =             0x2210
  revision ID =                 0x01
  class code =                  0x06 (Bridge device)
  sub class code =              0x00
  programming interface =       0x00
  cache line =                  0x00
  latency time =                0x07
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000008
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00000000
  base address 5 =              0x00000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x10e8
  sub system ID =               0xcafe
  expansion ROM base address =  0x00000000
  interrupt line =              0x00
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00

Found PCI device 00.04.00:
  vendor ID =                   0x105a
  device ID =                   0x0d30
  command register =            0x0004
  status register =             0x0210
  revision ID =                 0x02
  class code =                  0x01 (Mass storage controller)
  sub class code =              0x01
  programming interface =       0x8a
  cache line =                  0x00
  latency time =                0x40
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000000
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00006801
  base address 5 =              0x00000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x105a
  sub system ID =               0x4d33
  expansion ROM base address =  0x000dc000
  interrupt line =              0x1d
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00
=> ide
ide - IDE sub-system

Usage:
ide reset - reset IDE controller
ide info  - show available IDE devices
ide device [dev] - show or set current device
ide part [dev] - print partition table of one or all IDE devices
ide read  addr blk# cnt
ide write addr blk# cnt - read/write `cnt' blocks starting at block `blk#'
    to/from memory address `addr'
=> ide reset

Reset IDE: Bus 0: ............................................................** Timeout **

working ide, dht-walnut


U-Boot 1.2.0-g7882751c-dirty (Apr 14 2007 - 16:44:37)

CPU:   AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz)
       Internal PCI arbiter enabled, PCI async ext clock used
       16 kB I-Cache 8 kB D-Cache
Board: Walnut - AMCC PPC405GP Evaluation Board
I2C:   ready
DRAM:  32 MB
FLASH: 512 kB
PCI:   Bus Dev VenId DevId Class Int
        00  04  105a  0d30  0101  1d
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0
IDE:   Bus 0: OK 
  Device 0: not available
  Device 1: not available
"ide.part.1th stores kernel rawimage"
Hit any key to stop autoboot:  5..0
=> pci
Scanning PCI devices on bus 0
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
_____________________________________________________________
00.00.00   0x1014     0x0156     Bridge device           0x00
00.04.00   0x105a     0x0d30     Mass storage controller 0x01

=> help pci
pci [bus] [long]
    - short or long list of PCI devices on bus 'bus'
pci header b.d.f
    - show header of PCI device 'bus.device.function'
pci display[.b, .w, .l] b.d.f [address] [# of objects]
    - display PCI configuration space (CFG)
pci next[.b, .w, .l] b.d.f address
    - modify, read and keep CFG address
pci modify[.b, .w, .l] b.d.f address
    -  modify, auto increment CFG address
pci write[.b, .w, .l] b.d.f address value
    - write to CFG address

=> pci long
Scanning PCI devices on bus 0

Found PCI device 00.00.00:
  vendor ID =                   0x1014
  device ID =                   0x0156
  command register =            0x0006
  status register =             0x2210
  revision ID =                 0x01
  class code =                  0x06 (Bridge device)
  sub class code =              0x00
  programming interface =       0x00
  cache line =                  0x00
  latency time =                0x07
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000008
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00000000
  base address 5 =              0x00000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x10e8
  sub system ID =               0xcafe
  expansion ROM base address =  0x00000000
  interrupt line =              0x00
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00

Found PCI device 00.04.00:
  vendor ID =                   0x105a
  device ID =                   0x0d30
  command register =            0x0007
  status register =             0x0210
  revision ID =                 0x02
  class code =                  0x01 (Mass storage controller)
  sub class code =              0x01
  programming interface =       0x8a
  cache line =                  0x00
  latency time =                0x80
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000000
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00800001
  base address 5 =              0x80000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x105a
  sub system ID =               0x4d33
  expansion ROM base address =  0x000dc000
  interrupt line =              0x1d
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00

=> pci header 00.04.00
  vendor ID =                   0x105a
  device ID =                   0x0d30
  command register =            0x0007
  status register =             0x0210
  revision ID =                 0x02
  class code =                  0x01 (Mass storage controller)
  sub class code =              0x01
  programming interface =       0x8a
  cache line =                  0x00
  latency time =                0x80
  header type =                 0x00
  BIST =                        0x00
  base address 0 =              0x00000000
  base address 1 =              0x00000000
  base address 2 =              0x00000000
  base address 3 =              0x00000000
  base address 4 =              0x00800001
  base address 5 =              0x80000000
  cardBus CIS pointer =         0x00000000
  sub system vendor ID =        0x105a
  sub system ID =               0x4d33
  expansion ROM base address =  0x000dc000
  interrupt line =              0x1d
  interrupt pin =               0x01
  min Grant =                   0x00
  max Latency =                 0x00
=> pci display 00.04.00
00000000: 0d30105a 02100007 01018a02 00008000
00000010: 00000000 00000000 00000000 00000000
00000020: 00800001 80000000 00000000 4d33105a
00000030: 000dc000 00000058 00000000 0000011d
=> 
00000000: 0d30105a 02100007 01018a02 00008000
00000010: 00000000 00000000 00000000 00000000
00000020: 00800001 80000000 00000000 4d33105a
00000030: 000dc000 00000058 00000000 0000011d
=> 
00000000: 0d30105a 02100007 01018a02 00008000
00000010: 00000000 00000000 00000000 00000000
00000020: 00800001 80000000 00000000 4d33105a
00000030: 000dc000 00000058 00000000 0000011d



no working ide, dht-walnut, ramrootfs (ide is ok for linux)

U-Boot 2009.06-00298-g3672cd5-dirty (Jul 13 2009 - 19:05:51)

CPU:   AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz)
       Internal PCI arbiter enabled, PCI async ext clock used
       16 kB I-Cache 8 kB D-Cache
Board: DHT Walnut - IBM PPC405GP Board
I2C:   ready
DRAM:  32 MB
FLASH: 512 kB
PCI:   Bus Dev VenId DevId Class Int
        00  04  105a  0d30  0101  1d
Net:   ppc_4xx_eth0
IDE:   Bus 0: ............................................................** Timeout **

Type run flash_nfs to mount root filesystem over NFS

Hit any key to stop autoboot:  5..0

=> tftpboot 800000 gentoo-walnut-ramrootfs.img
Using ppc_4xx_eth0 device
TFTP from server 192.168.1.14; our IP address is 192.168.1.2
Filename 'gentoo-walnut-ramrootfs.img'.
Load address: 0x800000
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #########################
done
Bytes transferred = 4183409 (3fd571 hex)
=> bootm
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   "ramrootfs" 
   Created:      2009-07-10   9:25:46 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    4183345 Bytes =  4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.6.15.4-sliding-snow-leopard-dht-walnut-ppc405 (root@minerva) (gcc version 4.1.2) #52 Fri Jul 10 11:25:34 CEST 2009
IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)
Built 1 zonelists
Kernel command line: console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash
PID hash table entries: 256 (order: 8, 4096 bytes)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 26880k available (1932k kernel code, 604k data, 2992k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 5 of device 0000:00:04.0
fuse init (API version 7.3)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
loop: loaded (max 8 devices)
PPC 4xx OCP EMAC driver, version 3.54
mal0: initialized, 1 TX channels, 1 RX channels
eth0: emac0, MAC de:ad:be:ef:de:ad
eth0: found Generic MII PHY (0x09)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20265: IDE controller at PCI slot 0000:00:04.0
PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
    ide0: BM-DMA at 0x6800-0x6807, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x6808-0x680f, BIOS settings: hdc:pio, hdd:DMA
hdb: LEXAR ATA_FLASH, CFA DISK drive
hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdb: set_drive_speed_status: error=0x04 { DriveStatusError }
ide0 at 0x1f0-0x1f7,0x3f6 on irq 31
hdb: max request size: 128KiB
hdb: 15744 sectors (8 MB) w/1KiB Cache, CHS=246/2/32
hdb: cache flushes not supported
 hdb: [mac] hdb1 hdb2 hdb3
I2O subsystem v1.288
i2o: max drivers = 8
I2O ProcFS OSM v1.145
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Freeing unused kernel memory: 2992k init
[*] mount 
[*] ttykeymaps 
/dev/tty0 /dev/tty1 /dev/tty2 /dev/tty3 /dev/tty4 /dev/tty5 /dev/tty6 /dev/tty7 
/dev/ttyS0 
[*] clock 
[*] hostname 
[*] networking 
eth0: link is up, 100 FDX
[*] telnetd 
                                                                             
   e    a    r    l    y     r    a    m    r    o    o    t    f    s       
   Y O U    H A V E    T H E   P O W E R    U S E    C A R E F U L L Y       
   i   n   s   e   r   t      c  o  i  n  s      p   l   e   a   s   e       
                                                                             

                 ,,,,
                $$$$$$
              $$$$$$$$$  D H T - W A L N U T 4 0 5 G P
             $$$$$$$$$$$                                 ,,
             $$$$$$$$$$$$                              $$$$$,
             `$$$$$$$$$$$                            $$$$$$$$
              `$$$$$$$$$Z$      $$$       $$$       $$$$$$$$`
               `$ZzZ$$$Z$$$   $$$$$$$   $$$$$$$    $$$$$$$$`
                `$$$ZZZ$$$$$ $$$$$$$$$ $$$$$$$$$  $$$$$$$$`
                 `$$$$$$$$$$ $$ZZ$$$$$ $$ZZZ$$$$ $$$$$$$$
    u$$$$$$u      `$$$$$$$$$$ $$$ZZZ$$ $$$$$ZZ$$ $$$$$$$`
  $$$$$$$$$$Z$     `$ZZ$$$ZZZ $$$$$$$$ $$$$$$$$$ $$$$$$
 $$$$$$$$$$$Z$$$$  $$$$zzz$$$ $$$$$$$$ $$$$$$$$$ $$$$$$`
 $$$$$$$$$$Z$$$$$$$$$$$$$$$$$ $$ZZ$$$$ $ZZZ$$$$$ $$$$$`
   `$$$$$$$Z$$$$$$$$$$$$$$$$$ $$$$$ZZ$ $ $$$$$$$ $$$$$`
        `$Z$$$$$$$$$$$$$$$$$$ $SB$$$  $$ $$$$$$ $$$$`
          `$$$$$$$$$$$$$$$$$$$,````,$$$$, ````,$$$$`
           `$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$`
             `$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$`
               `$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$`
                  `$$$$$$$$$$$$$$$$ $$$$$$$$$$`
                   `$$$$$$$$$$$$$$$$ $$$$$$$`
                     $$$$$$$$$$$$$$$$$$$$$$ 
 
             P  o  w  e  r  P  C   m  a  c  h  i  n  e 

             genuine interest in the u' n i x platform 
             genuine appreciation of solid engineering 

earlyrootfs login: root
Password: 
  M  e  s  s  a  g  e      O  f      T  h  e      D  a  y
  i  n  s  e  r  t     c  o  i  n  s     p  l  e  a  s  e                                             
uc-earlyrootfs ~ #