Difference between revisions of "InnoTab 3.5mm Uart"
(Created page with "= Introduction = This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mo...") |
|||
Line 12: | Line 12: | ||
NOTE: [http://www.sparkfun.com/products/11154 Sparkfun.com] has a good selection of compatible parts | NOTE: [http://www.sparkfun.com/products/11154 Sparkfun.com] has a good selection of compatible parts | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
= PCB Connection = | = PCB Connection = | ||
Line 31: | Line 24: | ||
[[File:innotab_case_cable-c.jpg|200px]] | [[File:innotab_case_cable-c.jpg|200px]] | ||
+ | |||
+ | = Inside Case = | ||
+ | [[File:innotab_case_cage.jpg|200px]] | ||
+ | |||
+ | [[File:innotab_case_inside-a.jpg|200px]] | ||
+ | |||
+ | [[File:innotab_case_inside-b.jpg|200px]] | ||
= Outside Case = | = Outside Case = |
Revision as of 20:26, 26 May 2012
Contents
Introduction
This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mod. In addition the parts chosen have been selected due to the availability, ease of use, and cost.
Note: If you use a 2.5mm stereo socket instead of the 3.5mm one, you can use the many "Motorola T191" and compatible cables as they are used with OsmocomBB and a varity of other Osmocom projects. The cables are also often available cheaper than the 3.5mm cable from Digikey linked below.
Parts
- quantity 1 - usb->rs-232 with audio jack
- quantity 1 - through hole audio jack
NOTE: Sparkfun.com has a good selection of compatible parts
PCB Connection
Cable Sections
Inside Case
Outside Case