Installing A Software Package In Angstrom

From eLinux.org
Revision as of 12:14, 3 October 2013 by Jayneil (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Mlogo.png Back to the MinnowBoard home page


Minnow

Summary

In this guide, we will learn how to install a software package in Angstrom which is an embedded Linux distribution. Though, the reference board for this guide was MinnowBoard, you can use the same instructions for any other board running Angstrom.

Steps

1. First step is to make sure that the MinnowBoard has internet connectivity. Connect one end of an Ethernet wire to the gigabit Ethernet port on the MinnowBoard and the other end to your router. The figure below illustrates the same:

2. Power on the MinnowBoard and login to Angstrom. Refer this link for more detailed information on how to do it.

3.

Tips and Tricks