Difference between revisions of "J1939"

From eLinux.org
Jump to: navigation, search
(drop iproute2 requirement)
(5 intermediate revisions by 2 users not shown)
Line 20: Line 20:
 
== Sources ==
 
== Sources ==
 
Support for SAE J1939 in Linux consists of 3 parts:
 
Support for SAE J1939 in Linux consists of 3 parts:
* [http://gitorious.org/~kurt-vd/linux-can-j1939 j1939 linux kernel]
+
* [http://github.com/kurt-vd/linux j1939 linux kernel]
* [http://gitorious.org/~kurt-vd/can-j1939-utils j1939 can-utils]
+
* [http://github.com/kurt-vd/can-utils j1939 can-utils]
* [http://gitorious.org/~kurt-vd/iproute2-j1939 j1939 iproute2]
 
  
You probably want all 3 components to get a J1939 linux node working.
+
You probably want all 2 components to get a J1939 linux node working.
 +
The J1939 specific code resides in dedicated branches.
  
 
The final goal is to have these source trees mainlined.
 
The final goal is to have these source trees mainlined.
  
== Howto ==
+
Note that earlier versions needed a modified iproute2.
todo...
+
This requirement has been dropped.
 +
 
 +
== Build ==
 +
=== Build the kernel (necessary) ===
 +
 
 +
    $ git clone <yourfavoritelinuxkernel> linux
 +
    $ cd linux
 +
    $ git remote add j1939 git://github.com/kurt-vd/linux
 +
    $ git remote update j1939
 +
    $ git merge j1939/j1939d-vX.X
 +
    $ make etc.
 +
 
 +
With j1939-vX.X the branch that matches the closest, but not higher, with your linux version.
 +
 
 +
=== Build can-j1939-utils (recommended) ===
 +
 
 +
    $ git clone git://github.com/kurt-vd/can-utils
 +
    $ cd can-utils
 +
    $ make etc.
 +
 
 +
Or you may merge the j1939 changes into any other can-utils version.
 +
This should be fairly simple.
 +
 
 +
If the branch of linux-can-j1939 that you merged into your kernel was for version 3.7 or higher, use the j1939-v6 branch of can-j1939-utils.
 +
 
 +
=== Getting Started with J1939 ===
 +
 
 +
I prepared a good howto with example program on [https://github.com/kurt-vd/test-can-j1939/blob/master/can-j1939-kickstart.md my github page].

Revision as of 00:05, 19 March 2016

SAE J1939 in Linux

overview

See also on Wikipedia.

SAE J1939 defines a higher layer protocol on CAN. It implements a more sophisticated addressing scheme and extends the maximum packet size above 8 bytes. Several derived specifications exists, which differ from the original j1939 on the application level, like MilCAN, NMEA2000 and especially ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended Transport Protocol) which is has been included in this implementation. This inclusion results in a maximum packet size of ((2^24)-1)*7 bytes

Specifications

  • SAE J1939-21 : data link layer
  • SAE J1939-81 : network management
  • ISO 11783-6  : Virtual Terminal (Extended Transport Protocol)

Sources

Support for SAE J1939 in Linux consists of 3 parts:

You probably want all 2 components to get a J1939 linux node working. The J1939 specific code resides in dedicated branches.

The final goal is to have these source trees mainlined.

Note that earlier versions needed a modified iproute2. This requirement has been dropped.

Build

Build the kernel (necessary)

   $ git clone <yourfavoritelinuxkernel> linux
   $ cd linux
   $ git remote add j1939 git://github.com/kurt-vd/linux
   $ git remote update j1939
   $ git merge j1939/j1939d-vX.X
   $ make etc.

With j1939-vX.X the branch that matches the closest, but not higher, with your linux version.

Build can-j1939-utils (recommended)

   $ git clone git://github.com/kurt-vd/can-utils
   $ cd can-utils
   $ make etc.

Or you may merge the j1939 changes into any other can-utils version. This should be fairly simple.

If the branch of linux-can-j1939 that you merged into your kernel was for version 3.7 or higher, use the j1939-v6 branch of can-j1939-utils.

Getting Started with J1939

I prepared a good howto with example program on my github page.