Literati

From eLinux.org
Revision as of 03:43, 28 October 2011 by Cschalle (talk | contribs) (Add category)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Links

  1. New Dev forum http://literati.linuxprogrammer.org
  2. Old Dev forum http://forum.literatidevs.com/index.php

Hardware

  • CPU: S3C6410 running at 666Mhz
  • Memory: 64MB
  • LCD: innolux lcd 480 X 800

NAND (internal flash)

NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00340000 : "Kernel"
0x00340000-0x00d40000 : "resource"
0x00d40000-0x11140000 : "File System 1"
0x11140000-0x20000000 : "User space"

Datasheets

smdk6410 it looks to be based on this. File:Lookbook-schematics.pdf

LCD quick view

JTAG Port

The JTAG port has yet to be identified on the Literati.

Serial Port

Serial Port Access

Opening Your Literati (White Sunway Model)

Opening White Literati

Kernel testing

Burn Kernel/Booting from SD

dmesg from ygator

Linux version 2.6.24.2 (root@ligang-laptop) (gcc version 4.1.2) #180 Mon Aug 23 00:49:07 CST 2010
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
Machine: SMDK6410
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
CPU S3C6410 (id 0x36410101)
S3C6410: core 666.000 MHz, memory 111.000 MHz, peripheral 55.500 MHz
S3C6410: EPLL 192.000 MHz
S3C64XX Clocks, (c) 2007 Samssung Electronics
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttySAC0,115200 loglevel=0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
Trying to install chained interrupt handler for IRQ0
Trying to install chained interrupt handler for IRQ1
Trying to install chained interrupt handler for IRQ32
Trying to install chained interrupt handler for IRQ33
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00600900, tcnt 29b0, tcfg 00001919,00000040, usec 000077ee
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61708KB available (2768K code, 265K data, 104K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
================> wifi status change from 0 to 0
S3C6410 Power Management, (c) 2008 Samsung Electronics
s3c6410: Initialising architecture
S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
Total 32 DMA channels will be initialized.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
S3C_LCD clock got enabled :: 111.000 Mhz
LCD TYPE :: LTE480WV will be initialized
Window[0] - FB1: map_video_memory: clear ff200000:000bb800
FB1: map_video_memory: dma=53900000 cpu=ff200000 size=000bb800
Console: switching to colour frame buffer device 100x30
fb0: s3cfb frame buffer device
s3c_lcd_set_power:1 
PWM channel 1 set g_tcnt = 1000, g_tcmp = 480 
S3C ADC driver, (c) 2007 Samsung Electronics
S3C ADC driver successfully probed !
s3c-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 37) is a S3C
s3c-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 38) is a S3C
s3c-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 39) is a S3C
s3c-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 40) is a S3C
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
S3C NAND Driver, (c) 2007 Samsung Electronics
S3C NAND Driver is using hardware ECC.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Creating 5 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00340000 : "Kernel"
0x00340000-0x00d40000 : "resource"
0x00d40000-0x11140000 : "File System 1"
0x11140000-0x20000000 : "User space"
UBI: attaching mtd3 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 258048 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd3 to ubi0
UBI: MTD device name: "File System 1"
UBI: MTD device size: 260 MiB
UBI: number of good PEBs: 1040
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 10
UBI: total number of reserved PEBs: 1030
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 3/1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
UBI: background thread "ubi_bgt0d" started, PID 223
usb_host_clk_en 
otg_phy_init ...................!
s3c2410-ohci s3c2410-ohci: S3C OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 47, io mem 0x74300000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
s3c6410_OTGHCD s3c6410_OTGHCD: S3C6410 OTGHCD
s3c6410_OTGHCD s3c6410_OTGHCD: new USB bus registered, assigned bus number 2
s3c6410_OTGHCD s3c6410_OTGHCD: irq 58, io mem 0x7c000000
===============Enter ID_DEVICE Mod===============
===============Enter ID_DEVICE Mod===============
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
otg_phy_init ...................!
===============Enter ID_DEVICE Mod===============
===============Enter ID_DEVICE Mod===============
otg_phy_init ...................!
Loaded s3c-udc version Aug 23 2010 (DMA Mode)
input: midfun-keys as /devices/platform/midfun-keys/input/input0
input: s3c-keypad as /devices/platform/s3c-keypad/input/input1
s3c-keypad Initialized
S3C Keypad Driver
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
i2c /dev entries driver
s3c2410-i2c s3c2410-i2c: slave address 0x10
s3c2410-i2c s3c2410-i2c: bus frequency set to 108 KHz
s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
s3c-hsmmc: card inserted.
[s3c_hsmmc_probe]: s3c-hsmmc.1: at 0xc5000000 with irq 57. clk src: sclk_DOUTmpll_mmc1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c2410-rtc s3c2410-rtc: setting system clock to 2011-02-06 04:43:51 UTC (1296967431)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 259854336 bytes (253764 KiB, 247 MiB, 1007 LEBs)
UBIFS: journal size: 12902400 bytes (12600 KiB, 12 MiB, 50 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
VFS: Mounted root (ubifs filesystem).
Freeing init memory: 104K
UART err int.
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address ebe2
mmcblk0: mmc0:ebe2 SD512 500224KiB 
mmcblk0: p1
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
UBI: attaching mtd4 to ubi1
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 258048 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd4 to ubi1
UBI: MTD device name: "User space"
UBI: MTD device size: 238 MiB
UBI: number of good PEBs: 955
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 955
UBI: number of PEBs reserved for bad PEB handling: 9
UBI: max/mean erase counter: 2/1
UBI: background thread "ubi_bgt1d" started, PID 500
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "ubifs1"
UBIFS: file system size: 240758784 bytes (235116 KiB, 229 MiB, 933 LEBs)
UBIFS: journal size: 12128256 bytes (11844 KiB, 11 MiB, 47 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
s3c-nand: 1 bit(s) error detected, corrected successfully
s3c-nand: 1 bit(s) error detected, corrected successfully
Adding 64492k swap on /mnt/swap/actual_swap. Priority:-1 extents:1 across:64492k
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
================> wifi status change from 0 to 1
rtusb init --->


=== pAd = c4f01000, size = 439728 ===

RTMPAllocAdapterBlock, Status=0
usbcore: registered new interface driver rt2870
RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
RTUSBVenderReset
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc] 
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1 
== rt28xx_init, Status=0
0x1300 = 00073200
s3c_lcd_set_power:1 
PWM channel 1 set g_tcnt = 1000, g_tcmp = 96 
Terminate the task(RtmpMlmeTask) with pid(559)!
Terminate the task(RtmpCmdQTask) with pid(560)!
Terminate the task(RtmpTimerTask) with pid(558)!
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
================> wifi status change from 1 to 0
usb 1-1: USB disconnect, address 2
rtusb_disconnect: unregister usbnet usb-s3c24xx-1
RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
RTUSB disconnect successfully

Categoty:Literati