Difference between revisions of "Minnowboard:Hardware Revisions"

From eLinux.org
Jump to: navigation, search
(Updating and adding MinnowMax data)
Line 34: Line 34:
 
2. The silkscreen for the RTC battery polarity is incorrect on the MinnowBoard.  
 
2. The silkscreen for the RTC battery polarity is incorrect on the MinnowBoard.  
 
*Workaround: No damage will occur if you insert the RTC battery backwards.
 
*Workaround: No damage will occur if you insert the RTC battery backwards.
 +
 +
[[Category:MinnowBoard]]

Revision as of 13:51, 19 March 2015

MinnowMax

Revision A0

Hardware test platform (limited availability)

Revision A1

General Availability (Expected June 2014)

Known Software Issues

  • None

Known Hardware Issues

  • None

MinnowBoard

Revision A

Known Software Issues

  • GPIO buttons are slow to respond

Known Hardware Issues

1. Left/Right Audio channels swapped on line-out jack

  • Workaround: edit /etc/asound.conf to swap the channels:
# Swap L/R channels for MinnowBoard Rev A boards
pcm.!default {
    type route
    slave.pcm "cards.pcm.default"
    ttable.0.1 1
    ttable.1.0 1
}

2. The silkscreen for the RTC battery polarity is incorrect on the MinnowBoard.

  • Workaround: No damage will occur if you insert the RTC battery backwards.