Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
(Lure Types)
Line 51: Line 51:
 
* [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)]
 
* [http://www.ti.com/product/sn75lvds82 FPDLink-I to RGB888 bridge(aka LVDS to parallel)]
 
* [[BoardBringupLCD|Presentation and References for LCD interfaces]]
 
* [[BoardBringupLCD|Presentation and References for LCD interfaces]]
 +
 +
 +
= Reference Lures =
 +
 +
== Beacon Lure ==
 +
 +
* Type-C Lure
 +
* 7 Segment Display via Shift Register
 +
* EEPROM
 +
* PWM Controlled RGB LED
 +
* [[Beacon_Lure|Beacon Lure Page]]
 +
 +
== Trainer Lure ==
 +
 +
* Type-A Lure
 +
* Atmel AVR (Arduino Compatible)
 +
* Prototype Area
 +
* EEPROM
 +
* Trainer Lure Page
 +
 +
 +
== LVDS Lure ==
 +
 +
* Type-B Lure
 +
* Backlight Power supply
 +
* FPDLink-I connector (aka LVDS)
 +
* EEPROM
 +
* LVDS Lure Page
 +
 +
== MiniPCIe / mSATA Lure ==
 +
 +
* Type-A Lure
 +
* EEPROM
 +
* miniPCIe Connector
 +
* mSATA Connector
 +
 +
== Prototype Breakout ==
 +
 +
* Type-C Lure
 +
* Breakout for all low speed signals
 +
** i2c
 +
** spi
 +
** gpio
 +
** can
 +
 +
== I/O Pad ==
 +
 +
* Type-B Lure
 +
* 5 buttons
 +
* 5 LEDS
 +
* 2x10 Character LCD
 +
* EEPROM

Revision as of 19:42, 5 March 2013

Lure Types

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-C

  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)

EEPROM

  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface


Reference Lures

Beacon Lure

  • Type-C Lure
  • 7 Segment Display via Shift Register
  • EEPROM
  • PWM Controlled RGB LED
  • Beacon Lure Page

Trainer Lure

  • Type-A Lure
  • Atmel AVR (Arduino Compatible)
  • Prototype Area
  • EEPROM
  • Trainer Lure Page


LVDS Lure

  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • EEPROM
  • LVDS Lure Page

MiniPCIe / mSATA Lure

  • Type-A Lure
  • EEPROM
  • miniPCIe Connector
  • mSATA Connector

Prototype Breakout

  • Type-C Lure
  • Breakout for all low speed signals
    • i2c
    • spi
    • gpio
    • can

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD
  • EEPROM