Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
(Pmod Adapter Board(aka 'Hula Poppy' Lure))
 
(28 intermediate revisions by 4 users not shown)
Line 1: Line 1:
'''NOTE: The Lure Board Specifications are under development and are a "working in progress"'''
+
'''NOTE: The Lure Board Specifications are under development and are a "work in progress"'''
  
 
= Lure Types =
 
= Lure Types =
[[File:Lure-Types.jpg|500px]]
+
[[File:Lure-Types.jpg|400px]] [[file:Lure-Connectors.jpg|400px]]
 +
 
 
== Type A ==
 
== Type A ==
 
* 106.68mm x 106.68mm (4.2" x 4.2")
 
* 106.68mm x 106.68mm (4.2" x 4.2")
Line 10: Line 11:
 
* Placement over top of board
 
* Placement over top of board
 
* Four mounting holes at edges of minnow
 
* Four mounting holes at edges of minnow
 +
[[File:type-a-top.jpg|200px]] [[File:type-a-front.jpg|200px]] [[File:type-a-back.jpg|200px]] [[file:type-a-connector.jpg|200px]]
  
 
== Type B ==
 
== Type B ==
Line 18: Line 20:
 
* Placement over top of board
 
* Placement over top of board
 
* Two screw mounting holes in center of minnow
 
* Two screw mounting holes in center of minnow
 +
[[File:type-b-top.jpg|200px]] [[File:type-b-front.jpg|200px]] [[File:type-b-back.jpg|200px]] [[file:type-b-connector.jpg|200px]]
 +
  
 
== Type-C ==
 
== Type-C ==
Line 26: Line 30:
 
* Extends from side of minnow board
 
* Extends from side of minnow board
 
* No mount holes (needs review)
 
* No mount holes (needs review)
 +
[[File:type-c-top.jpg|200px]] [[File:type-c-front.jpg|200px]] [[File:type-c-back.jpg|200px]] [[file:type-c-connector.jpg|200px]]
  
 
= Lure Features =
 
= Lure Features =
Line 63: Line 68:
 
* EEPROM
 
* EEPROM
 
* PWM Controlled RGB LED
 
* PWM Controlled RGB LED
* [[Beacon_Lure|Beacon Lure Page]]
+
* [[MinnowBoard:Beacon_Lure|Beacon Lure Page]]
  
 
== Trainer Lure ==
 
== Trainer Lure ==
Line 72: Line 77:
 
* EEPROM
 
* EEPROM
 
* Trainer Lure Page
 
* Trainer Lure Page
 
+
* [[MinnowBoard:Trainer_Lure| Trainer Lure Wiki Page]]
  
 
== LVDS Lure ==
 
== LVDS Lure ==
Line 82: Line 87:
 
* LVDS Lure Page
 
* LVDS Lure Page
  
== MiniPCIe / mSATA Lure ==
+
== MiniPCIe / mSATA Lure(aka 'Lizzy' Lure) ==
  
 
* Type-A Lure
 
* Type-A Lure
Line 89: Line 94:
 
* mSATA Connector
 
* mSATA Connector
  
== Prototype Breakout ==
+
== Break-out-Board(aka 'BOB' Lure) ==
  
 
* Type-C Lure
 
* Type-C Lure
Line 96: Line 101:
 
** spi
 
** spi
 
** gpio
 
** gpio
** can
+
** UARTs
 +
** usb host
 +
* [[MinnowBoard:Bob_Lure| BOB Lure Wiki Page]]
  
 
== I/O Pad ==
 
== I/O Pad ==
Line 105: Line 112:
 
* 2x10 Character LCD  
 
* 2x10 Character LCD  
 
* EEPROM
 
* EEPROM
 +
 +
== Automotive ==
 +
 +
* CAN bus interfaces
 +
* 12V power input
 +
* 12V switched power rails
 +
* Voltage Sampling
 +
* [[MinnowBoard:Automotive Lure| Automotive Lure wiki page]]
 +
 +
== Pmod Adapter Board(aka 'Hula Poppy' Lure) ==
 +
 +
* Type-C Lure
 +
* Peripheral Module Interfaces for
 +
** I2C
 +
** SPI
 +
** GPIO
 +
** UARTs
 +
** SDIO
 +
* [http://www.patternagents.com/news/2013/12/26/Hula-Poppy-Lure-minnow-board.html Hula Poppy Lure Page]
 +
 +
= Hardware References =
 +
 +
* [[media:minnow-lure-base.tar.gz|Eagle Library for Minnow Lures]]
 +
 +
* [http://www.patternagents.com/news/2013/12/24/minnow-board-lures.html PatternAgents Extended Eagle Library for Minnow Lures]
 +
 +
[[Category: MinnowBoard]]
 +
[[Category: MinnowBoard Expansion Boards]]
 +
[[Category: CircuitCo]]

Latest revision as of 13:43, 27 December 2013

NOTE: The Lure Board Specifications are under development and are a "work in progress"

Lure Types

Lure-Types.jpg Lure-Connectors.jpg

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type-a-top.jpg Type-a-front.jpg Type-a-back.jpg Type-a-connector.jpg

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-b-top.jpg Type-b-front.jpg Type-b-back.jpg Type-b-connector.jpg


Type-C

  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Type-c-top.jpg Type-c-front.jpg Type-c-back.jpg Type-c-connector.jpg

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)

EEPROM

  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface


Reference Lures

Beacon Lure

  • Type-C Lure
  • 7 Segment Display via Shift Register
  • EEPROM
  • PWM Controlled RGB LED
  • Beacon Lure Page

Trainer Lure

LVDS Lure

  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • EEPROM
  • LVDS Lure Page

MiniPCIe / mSATA Lure(aka 'Lizzy' Lure)

  • Type-A Lure
  • EEPROM
  • miniPCIe Connector
  • mSATA Connector

Break-out-Board(aka 'BOB' Lure)

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD
  • EEPROM

Automotive

Pmod Adapter Board(aka 'Hula Poppy' Lure)

Hardware References