Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
m (Added "Lizzy Lure" nickname to the mini PCIe/mSATA lure)
(add PatternAgents Extended Eagle Library for Minnow Lures)
Line 120: Line 120:
 
* Voltage Sampling
 
* Voltage Sampling
 
* [[MinnowBoard:Automotive Lure| Automotive Lure wiki page]]
 
* [[MinnowBoard:Automotive Lure| Automotive Lure wiki page]]
 +
 +
== Pmod Adapter Board(aka 'Hula Poppy' Lure) ==
 +
 +
* Type-C Lure
 +
* Peripheral Module Interfaces for
 +
** I2C
 +
** SPI
 +
** GPIO
 +
** UARTs
 +
** SDIO
 +
* [http://www.patternagents.com/news/2013/12/26/Hula-Poppy-Lure-minnow-board.html| Hula Poppy Lure Page]
  
 
= Hardware References =
 
= Hardware References =
Line 125: Line 136:
 
* [[media:minnow-lure-base.tar.gz|Eagle Library for Minnow Lures]]
 
* [[media:minnow-lure-base.tar.gz|Eagle Library for Minnow Lures]]
  
 +
* [http://www.patternagents.com/news/2013/12/24/minnow-board-lures.html| PatternAgents Extended Eagle Library for Minnow Lures]
  
 
[[Category: MinnowBoard]]
 
[[Category: MinnowBoard]]
 
[[Category: MinnowBoard Expansion Boards]]
 
[[Category: MinnowBoard Expansion Boards]]
 
[[Category: CircuitCo]]
 
[[Category: CircuitCo]]

Revision as of 13:40, 27 December 2013

NOTE: The Lure Board Specifications are under development and are a "work in progress"

Lure Types

Lure-Types.jpg Lure-Connectors.jpg

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type-a-top.jpg Type-a-front.jpg Type-a-back.jpg Type-a-connector.jpg

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-b-top.jpg Type-b-front.jpg Type-b-back.jpg Type-b-connector.jpg


Type-C

  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Type-c-top.jpg Type-c-front.jpg Type-c-back.jpg Type-c-connector.jpg

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)

EEPROM

  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface


Reference Lures

Beacon Lure

  • Type-C Lure
  • 7 Segment Display via Shift Register
  • EEPROM
  • PWM Controlled RGB LED
  • Beacon Lure Page

Trainer Lure

LVDS Lure

  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • EEPROM
  • LVDS Lure Page

MiniPCIe / mSATA Lure(aka 'Lizzy' Lure)

  • Type-A Lure
  • EEPROM
  • miniPCIe Connector
  • mSATA Connector

Break-out-Board(aka 'BOB' Lure)

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD
  • EEPROM

Automotive

Pmod Adapter Board(aka 'Hula Poppy' Lure)

Hardware References