Difference between revisions of "Nh5capeSoftware"
Line 8: | Line 8: | ||
For nh5cape rev. A1 <br> | For nh5cape rev. A1 <br> | ||
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-3.15-020914.img.gz <br> | http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-3.15-020914.img.gz <br> | ||
+ | http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-14.04-3.15-a1-221014.img.gz <br> | ||
<pre> | <pre> | ||
gunzip ubuntu-3.15-020914.img.gz | gunzip ubuntu-3.15-020914.img.gz |
Revision as of 11:55, 22 October 2014
As on 22-Oct-2014 this wiki is in updating state
Links and instructions updating
I will post update when it will be done
Contents
Install Ubuntu
Ubuntu 14.04 with kernel 3.15
Download ubuntu 14.04 with kernel 3.15
For nh5cape rev. A1
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-3.15-020914.img.gz
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-14.04-3.15-a1-221014.img.gz
gunzip ubuntu-3.15-020914.img.gz sudo dd if=./ubuntu-3.15-020914.img of=/dev/sdX; sync
For nh5cape rev. A2 (bought after 18-Oct-2014)
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-14.04-3.15-221014.img.gz
You will need 4GB SD card.
gunzip ubuntu-3.15-221014.img.gz sudo dd if=./ubuntu-14.04-3.15-221014.img of=/dev/sdX; sync
This image comes with preinstalled tslib and SGX libraries.
User: ubuntu
Password: temppwd
tslib
sudo su ts_test
SGX demo
cd /opt/gfxsdkdemos/ogles2/ ./OGLES2ChameleonMan
This image should be booted with pressed BOOT button. If you want to eliminate this - connect BBB as USB slave to PC and wait for boot. When it will recognized as USB disk - enter and rename file MLO to something else. It will enable boot from SD card only.
For graphic interface:
sudo apt-get install lxde
X11 should be changed to 24 bit for correct color display (change default color depth to 24)
sudo nano /etc/X11/xorg.conf
Ubuntu 14.04 with kernel 3.8
Updated 22-Oct-2014 for rev. A1 and A2
Download ubuntu 14.04 with kernel 3.8 from
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-3.8/ubuntu-14.04-3.8-221014.img.gz
You will need 4GB SD card.
This image supports all revisions of nh5cape.
gunzip ubuntu-14.04-3.8-221014.img.gz sudo dd if=./ubuntu-14.04-3.8-221014.img of=/dev/sdX; sync
This image comes with preinstalled tslib.
User: ubuntu
Password: temppwd
tslib
sudo su ts_test
Install Android
Android 4.2.2 with kernel 3.2
Download rowboat android image from http://www.cembsoft.com/user/lcdCape/android-3.2/rowboat-android-3.2-030914.img.gz
gunzip rowboat-android-3.2-030914.img.gz sudo dd if=./rowboat-android-3.2-030914.img of=/dev/sdX; sync
Build Kernel
Kernel 3.8
Updated 22-Oct-2014 for rev. A1 and A2
Download kernel source
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v3.8 -b tmp ./build_kernel.sh
Patch it
wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_3.8.patch wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_touchscreen.patch wget http://www.cembsoft.com/user/lcdCape/patches/videodriver_3.8.patch patch -p1 < nh5cape_touchscreen.patch patch -p1 < nh5cape_3.8.patch
Videodriver patch needed for 5" cape
patch -p1 < videodriver_3.8.patch
Rebuild the kernel
tools/rebuild.sh
When it asks for kernel configuration - navigate to drivers - input - touchscreen and enable ft5x0x_ts driver
Kernel 3.15
Updated 22-Oct-2014 for rev. A1 and A2
Download kernel source
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v3.15 -b tmp ./build_kernel.sh wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_3.15.patch wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_touchscreen.patch patch -p1 < nh5cape_touchscreen.patch patch -p1 < nh5cape_3.15.patch
Open file KERNEL/arch/arm/boot/dts/am335x-boneblack.dts and find at the end the following lines
/*http://elinux.org/Nh5cape*/ //#include "am335x-bone-nh5cape-a1.dtsi" #include "am335x-bone-nh5cape.dtsi" //#include "am335x-bone-nh7cape.dtsi"
Currently selected nh5cape rev. A2 (bought after 18-Oct-2014)
For nh5cape rev. A1 it should look
#include "am335x-bone-nh5cape-a1.dtsi" //#include "am335x-bone-nh5cape.dtsi" //#include "am335x-bone-nh7cape.dtsi"
Rebuild the kernel
tools/rebuild.sh
When it asks for kernel configuration - navigate to drivers - input - touchscreen and enable ft5x0x_ts driver
Rowboat android
Updated 22-Oct-2014 for rev. A1 and A2
Follow instructions from https://code.google.com/p/rowboat/wiki/JellybeanOnBeaglebone_WithSGX for download and build rowboat source
Download patch from http://www.cembsoft.com/user/lcdCape/patches/rowboat-android.patch
Copy patch to android source root folder
Apply the patch
patch -p1 < rowboat-android.patch
Enable ft5x0x_ts in drivers - input - touchscreen
Rebuild the kernel