Difference between revisions of "OpenPhoenux:GTA04"

From eLinux.org
Jump to: navigation, search
(Initial structure for GTA04)
 
m (add picture of GTA04 board)
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=GTA04 Overview=
 
=GTA04 Overview=
 
The GTA04 is an open hardware platform. Its design is roughly based on the [[Beagleboard:BeagleBoard-xM|BeagleBoard-xM]].
 
The GTA04 is an open hardware platform. Its design is roughly based on the [[Beagleboard:BeagleBoard-xM|BeagleBoard-xM]].
 +
 +
==Features==
 +
[[File:GTA04-Board.jpg|200px|thumb|right|GTA04 Board]]
 +
This is the feature list of the GTA04A4 (if integrated into an existing Neo1973/GTA01 or Freerunner/GTA02 case):
 +
* 2.8 inch LCD with VGA (640x480) and touch screen (single touch with pressure detection)
 +
* Processor: DM3730 (OMAP3), 800/1000 MHz, ARMv7 (Cortex A8), NEON, integrated DSP (TMS320C64x)
 +
* OpenGL© ES 2.0 capable 2D/3D graphics accelerator
 +
* 512 MB RAM
 +
* 512 MB/1 GB NAND Flash
 +
* microSDHC (up to 32 GB)
 +
* Quad-Band GSM, EDGE, UMTS HSDPA 14.4 MBit/s, HSUPA 5.76 MBit/s ([http://www.option.com/product/embedded-solutions/specifications Specs])
 +
* GPS 20 channel, int/ext. Antenna
 +
* FM receiver and transmitter, both with RDS
 +
* 802.11b/g, Bluetooth 2.0
 +
* USB 2.0: full OTG (Client, Charger, Host)
 +
* Camera 1.3 Mpx (optional accessory)
 +
* Sensors: 3-axis Accelerometer, 3-axis Compass, 3-axis Gyroscope, Barometer/Thermometer Ambient Light
 +
* Audio / Video: Ear, Microphone, (Stereo) Handsfree, 2.5mm 4pin AV Jack (Composite-Video- Out, Audio in/out, Remote Control)
 +
* stereo speaker support (only for Neo1973/GTA01 case)
 +
* Battery: replaceable 3.7 V LiIon, 1200 mAh
 +
* Others: 2 Buttons, 4 LEDs
 +
* internal RS232 (full level, RX/TX/RTS/CTS/RI) - for debugging, unbricking and optional console
 +
* Torch/Flash controller
 +
* RFID tag chip with 64 kBit EEPROM
 +
* IrDA (FIR) transmitter and receiver
 +
* fits into existing Openmoko Neo1973 or Freerunner case (reversible)
 +
* documentation (see [http://projects.goldelico.com/p/gta04-main/page/Manual/ Manual] incl. schematics) of all GPIO and signal connections to support driver development and extensions
 +
* 2x 60 pin expansion connector (optional)
  
 
=Revisions=
 
=Revisions=
 +
[[File:Om-Beagle-Hybrid.jpg|200px|thumb|right|Openmoko Beagle Hybrid]]
 
==GTA04A1/Openmoko Beagle Hybrid (2010)==
 
==GTA04A1/Openmoko Beagle Hybrid (2010)==
 +
A BeagleBoard-xM connected to a display-board, which fitted the case.
 +
 
==GTA04A2 (2010)==
 
==GTA04A2 (2010)==
 +
The first revision which integrated everything (SoC, Modem, Sensors, Peripherals, ...) on a single PCB.
 +
 
==GTA04A3 (2011)==
 
==GTA04A3 (2011)==
 +
* GTM501 replaced by GTM601W
 +
* BMA180 accelerometer added
 +
* RFID-EEPROM added
 +
* expansion connector added
 +
This revision was sent out to early adopters and software developers, to explore the new open hardware platform.
 +
 +
[[File:GTA04A4.jpg|200px|thumb|right|left|GTA04A4s]]
 +
 
==GTA04A4 (2012)==
 
==GTA04A4 (2012)==
==GTA04A5 (Future)==
+
* second LIS302 accelerometer removed
 +
* Sensors are no longer optional but always installed
 +
* Si4721 no longer optional but always installed
 +
 
 +
==GTA04A5==
 +
* BMP085 replaced by BMP180
 +
* BMA180 replaced
 +
* HMC5883 replaced
 +
* ITG3200 replaced by BMG160
 +
* GPS is always W2SG0084 (Sirf IV) and delivers pulse-per-second
 +
* 6 wire I2C expansion connector for external keyboard option or other purposes
 +
* prepared for Case Kit connectivity of earpiece and vibramotor
 +
* headset plugin detection improved
 +
* production related changes (i.e. components substituted because of EOL; no visible change in features)
 +
 
 +
This revision is currently (2014) awaiting a large enough pre-order/production batch size, to be produced:
 +
* https://shop.goldelico.com/wiki.php?page=GTA04A5
  
 
=Ressources=
 
=Ressources=
 
* GTA04 Project: http://www.gta04.org
 
* GTA04 Project: http://www.gta04.org
 +
* Features: http://projects.goldelico.com/p/gta04-main/page/FeatureList/
 +
 +
[[Category:OpenPhoenux]]

Latest revision as of 07:27, 2 May 2014

GTA04 Overview

The GTA04 is an open hardware platform. Its design is roughly based on the BeagleBoard-xM.

Features

GTA04 Board

This is the feature list of the GTA04A4 (if integrated into an existing Neo1973/GTA01 or Freerunner/GTA02 case):

  • 2.8 inch LCD with VGA (640x480) and touch screen (single touch with pressure detection)
  • Processor: DM3730 (OMAP3), 800/1000 MHz, ARMv7 (Cortex A8), NEON, integrated DSP (TMS320C64x)
  • OpenGL© ES 2.0 capable 2D/3D graphics accelerator
  • 512 MB RAM
  • 512 MB/1 GB NAND Flash
  • microSDHC (up to 32 GB)
  • Quad-Band GSM, EDGE, UMTS HSDPA 14.4 MBit/s, HSUPA 5.76 MBit/s (Specs)
  • GPS 20 channel, int/ext. Antenna
  • FM receiver and transmitter, both with RDS
  • 802.11b/g, Bluetooth 2.0
  • USB 2.0: full OTG (Client, Charger, Host)
  • Camera 1.3 Mpx (optional accessory)
  • Sensors: 3-axis Accelerometer, 3-axis Compass, 3-axis Gyroscope, Barometer/Thermometer Ambient Light
  • Audio / Video: Ear, Microphone, (Stereo) Handsfree, 2.5mm 4pin AV Jack (Composite-Video- Out, Audio in/out, Remote Control)
  • stereo speaker support (only for Neo1973/GTA01 case)
  • Battery: replaceable 3.7 V LiIon, 1200 mAh
  • Others: 2 Buttons, 4 LEDs
  • internal RS232 (full level, RX/TX/RTS/CTS/RI) - for debugging, unbricking and optional console
  • Torch/Flash controller
  • RFID tag chip with 64 kBit EEPROM
  • IrDA (FIR) transmitter and receiver
  • fits into existing Openmoko Neo1973 or Freerunner case (reversible)
  • documentation (see Manual incl. schematics) of all GPIO and signal connections to support driver development and extensions
  • 2x 60 pin expansion connector (optional)

Revisions

Openmoko Beagle Hybrid

GTA04A1/Openmoko Beagle Hybrid (2010)

A BeagleBoard-xM connected to a display-board, which fitted the case.

GTA04A2 (2010)

The first revision which integrated everything (SoC, Modem, Sensors, Peripherals, ...) on a single PCB.

GTA04A3 (2011)

  • GTM501 replaced by GTM601W
  • BMA180 accelerometer added
  • RFID-EEPROM added
  • expansion connector added

This revision was sent out to early adopters and software developers, to explore the new open hardware platform.

GTA04A4s

GTA04A4 (2012)

  • second LIS302 accelerometer removed
  • Sensors are no longer optional but always installed
  • Si4721 no longer optional but always installed

GTA04A5

  • BMP085 replaced by BMP180
  • BMA180 replaced
  • HMC5883 replaced
  • ITG3200 replaced by BMG160
  • GPS is always W2SG0084 (Sirf IV) and delivers pulse-per-second
  • 6 wire I2C expansion connector for external keyboard option or other purposes
  • prepared for Case Kit connectivity of earpiece and vibramotor
  • headset plugin detection improved
  • production related changes (i.e. components substituted because of EOL; no visible change in features)

This revision is currently (2014) awaiting a large enough pre-order/production batch size, to be produced:

Ressources