Difference between revisions of "Panda Bamboo"
From eLinux.org
(→Design) |
(→Hardware) |
||
| Line 4: | Line 4: | ||
== Hardware == | == Hardware == | ||
| − | * Real-Time clock with Battery Back-up | + | * SD card socket |
| − | * I2C | + | * I2C Real-Time clock with Battery Back-up |
| − | + | * I2C Serial EEPROM | |
| − | * 2 user LEDS | + | * 2 user GPIO LEDS |
* Power LED | * Power LED | ||
| − | * | + | * User Button configurable for GPIO or Reset |
| − | * | + | * User Button configurable for GPIO or Power-On/Off |
* 2 USB host ports | * 2 USB host ports | ||
* Fits in ABS plastic case | * Fits in ABS plastic case | ||
Revision as of 16:49, 24 July 2011
Contents |
Description
The Bamboo is an accessory board and case for the OMAP4430 based PandaBoard from TinCanTools. The Bamboo provides addition I/O as well as a case that allows the PandaBoard to be used in a Set Top Box(STB) configuration.
Hardware
- SD card socket
- I2C Real-Time clock with Battery Back-up
- I2C Serial EEPROM
- 2 user GPIO LEDS
- Power LED
- User Button configurable for GPIO or Reset
- User Button configurable for GPIO or Power-On/Off
- 2 USB host ports
- Fits in ABS plastic case
Case
Design
UPDATED - Revision 1 Schematic
