Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Panda Bamboo"

From eLinux.org
Jump to: navigation, search
(Design)
(Hardware)
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
  
 
== Hardware ==
 
== Hardware ==
* Real-Time clock with Battery Back-up
+
* SD card socket
* I2C Interface (+5V level)
+
* I2C Real-Time clock with Battery Back-up (using MCP79410)
* AT24C01 Serial EEPROM for Board Identification
+
* I2C Serial EEPROM (using MCP79410)
* 2 user LEDS
+
* 2 user GPIO LEDS
 
* Power LED
 
* Power LED
* Reset Button
+
* User Button configurable for GPIO or Reset
* Power Button
+
* User Button configurable for GPIO or Power-On/Off
 
* 2 USB host ports
 
* 2 USB host ports
 
* Fits in ABS plastic case
 
* Fits in ABS plastic case

Latest revision as of 17:35, 24 July 2011

Description

The Bamboo is an accessory board and case for the OMAP4430 based PandaBoard from TinCanTools. The Bamboo provides addition I/O as well as a case that allows the PandaBoard to be used in a Set Top Box(STB) configuration.

Hardware

  • SD card socket
  • I2C Real-Time clock with Battery Back-up (using MCP79410)
  • I2C Serial EEPROM (using MCP79410)
  • 2 user GPIO LEDS
  • Power LED
  • User Button configurable for GPIO or Reset
  • User Button configurable for GPIO or Power-On/Off
  • 2 USB host ports
  • Fits in ABS plastic case

Case

Panda-bamboo1.png Panda-bamboo2.png Panda-bamboo3.png Panda-bamboo4.png Panda-bamboo5.png

Design

UPDATED - Revision 1 Schematic