Panda How to add 2 USBs

• You can add 2 additional USB ports to the Pandaboard development platform.

These are the materials you will need in addition to your Pandaboard.

• A PC USB Thingy

• Detail of one of the Thingy's pigtails

The fifth pin (shield) is not connected.

Earlier versions of the Pandaboard had connections for the shield, but they were dropped in favour of some additional GPIOs.

• A 2 x 4 pin header .1" centers

Here is what the header will look like when soldered to J6 of the Pandaboard.

• Detail of the Thingy plugged into the Header at J6

Just solder the header into the J6 pins closest to the WIFI chip, Then plug in the pigtails.

Most PC USB Thingy's have a standard pinout that is compatible with J6

• First few pins of J6