Difference between revisions of "Panda How to add Power Switch"

From eLinux.org
Jump to: navigation, search
 
Line 23: Line 23:
 
** [http://www.sparkfun.com/products/116 Sparkfun Electronics]
 
** [http://www.sparkfun.com/products/116 Sparkfun Electronics]
 
** [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SAM1034-50-ND Digikey]
 
** [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SAM1034-50-ND Digikey]
[[File:header.jpg|240px]]
+
[[File:header2.jpg|240px]]
  
 
== Pinout ==
 
== Pinout ==
Line 36: Line 36:
 
* Solder the header into the J6 pins closest to the WIFI module
 
* Solder the header into the J6 pins closest to the WIFI module
 
* Detail of the header soldered into J6
 
* Detail of the header soldered into J6
[[File:board1.jpg|320px]]
+
[[File:board3.jpg|320px]]
 +
 
 +
<br>
 +
 
 +
* Detail of switch plugged into pins 12 and 8 of j6
 +
 
 +
[[File:button3.jpg|320px]]
 +
 
 +
<br>
 +
 
 +
* Another way to add the switch is just solder it to pins 12 and 8.
 +
 
 +
[[File:button4.jpg|320px]]
 +
 
 
<br>
 
<br>
 
<br>
 
<br>

Latest revision as of 19:08, 4 May 2011

Introduction

  • The J6 expansion header on the PandaBoard allows for the addition of a power switch.

This is a Work In Progress, don't go by anything below this line.


Materials

These are the materials you will need in addition to your Pandaboard.


Header2.jpg

Pinout

  • J6 Pinout

J6 detail1.jpg

Assembly

Here is what the header will look like when soldered to J6 of the Pandaboard.

  • Solder the header into the J6 pins closest to the WIFI module
  • Detail of the header soldered into J6

Board3.jpg


  • Detail of switch plugged into pins 12 and 8 of j6

Button3.jpg


  • Another way to add the switch is just solder it to pins 12 and 8.

Button4.jpg




Notes

  • First few pins of J6

J6 detail3.jpg