Difference between revisions of "Qinno:qCape-ICOM1"

From eLinux.org
Jump to: navigation, search
Line 30: Line 30:
 
Followings are some specifications of the BeagleBone LCD3 Cape:
 
Followings are some specifications of the BeagleBone LCD3 Cape:
  
 +
===General===
 
{|class="wikitable"
 
{|class="wikitable"
|rowspan="2"|Power|3.3V via BeagleBone header|-
+
|Bus Interface
|5V via BeagleBone header|-
+
|Beagle Bone Black (BBB) Rev. B
|Display Model|Elpa S035Q01|-
+
|-
|Display Type|3.5" TFT LCD|-
+
|Ports
|Resolution|320x240|-
+
|2 x RS232; 1 x RS485
|Touchscreen|4-wire|-
+
|-
|rowspan="2"|Indicators|Power LED|-
+
|Digital Outputs
|User LED|-
+
|4
|rowspan="3"|Switches|One power switch|-
+
|-
|One reset switch|-
+
|Digital Inputs
|Five user Switches|-
+
|4
|rowspan="3"|Connectors|One 46-position male headers|-
+
|-
|One 20-position male header|-
+
|Certification
|One 6-position male connector (removed since rev. A2)
+
|CE
 +
|-
 +
|RoHS Compliant
 +
|Yes
 
|}
 
|}
  
===General===
 
 
{|class="wikitable"|rowspan="2"
 
{|class="wikitable"|rowspan="2"
|Bus Interface|Beagle Bone Black (BBB) Rev. B|-
 
|Ports|2 x RS232; 1 x RS485|-
 
|Digital Outputs|4|-
 
|Digital Inputs|4|-
 
|Certification|CE|
 
 
}
 
}
 
Communication
 
Communication

Revision as of 08:15, 14 July 2014

Description

The qinno iCOM extension module is a CAPE specifically designed for the Beagle Bone Black (BBB). The iCOM provides different interfaces and digital I/O for direct usage in industrial environment.

Revision Changes

Revision A1

Initial release of qinno iCOM Cape

Software Support

  • Beaglebone iCOM Cape revision A1 is supported by Angstrom release 09-2013
  • Contact us for other Angstrom versions or other Linux distributions


  • Major BeagleBone image releases can be downloaded here.
  • Intermediate BeagleBone image releases can be downloaded here

Please follow the instructions here to write the image file to your SD card on a Windows machine.

Getting Started

Required setup:

  • A BeagleBone iCom Cape
  • A BeagleBone (with supported software)
  • A 5V DC power supply (we recommend 5V - 2A)

You will find detailed instructions included in the BSP-package coming with the Cape


Specifications

Followings are some specifications of the BeagleBone LCD3 Cape:

General

Bus Interface Beagle Bone Black (BBB) Rev. B
Ports 2 x RS232; 1 x RS485
Digital Outputs 4
Digital Inputs 4
Certification CE
RoHS Compliant Yes
} Communication Data Signals RS232 TxD; RxD; CTS; RTS RS485 Termination switchable; signal and power isolated Digital I/O Input Voltage Range Up to 24V DC Output Voltage Range 12V up to 45V DC Output on-state resistance 200mOhm Output Load Current Self limited; Nominal 0,7A; LED for each digital I/O Power Supply Input Voltage Range 12V to 48V DC Maximum Current 2A for BBB and onboard CAPE Devices Additional Functions Sensors Onboard temperature Sensor Memory Onboard CAPE EEPROM (256 kBit) Memory Onboard user EEPROM (1024 kBit) RTC Real time clock with CR2032 battery holder Stauts LED Digital input and output Environment Dimensions 100.2 mm x 89.1 mm Operating Temperature -20 up to 70°C (except battery) Ampient Operating Humidity 35% to 90% (at 5°C to 35°C) Software Angström Linux BSP available / Driver Support