RBTX49xx Platform Support

From eLinux.org
Jump to: navigation, search

Introduction

This page describes the feature of patches for TX49xx boards on CE Linx. TX49xx is mips architecture MPU from TOSHIBA.

Boards

We checked the patch on the following boards

  • TOSHIBA RBHMA4200 (RBTX4927)
  • TOSHIBA RBHMA4400 (RBTX4937)
  • TOSHIBA RBHMA4500 (RBTX4938)

Build Environment

We checked with the toolchain below

  • 2.6.8.1
    • gcc-3.3.2 / glibc-2.5.2 / binutils-1.15
    • gcc-3.4.2 / glibc-2.3.2 / binutils-1.15
    • MIPS toolchains from Sony (ToolChains)
  • 2.6.9
    • gcc-3.3.2 / glibc-2.5.2 / binutils-1.15
    • gcc-3.4.2 / glibc-2.3.2 / binutils-1.15
    • MIPS toolchains from Sony (ToolChains)
  • 2.6.10
    • gcc-3.4.2 / glibc-2.3.2 / binutils-1.15
    • MIPS toolchains from Sony (ToolChains)

Available Devices

  • Ether
  • Serial(UART)
  • PCI

Available Functions

Downloads

  • Patch for 2.6.8.1 is in Patch Archive
  • Patch for 2.6.9 is in Patch Archive
    • attachment:Makefile-mips.linux-2.6.9-1.patch
  • Patch for 2.6.10 is in Patch Archive (updated)
    • LTT - attachment:ltt-2.6.10-tb5-mips.patch , attachment:TraceToolkit-0.9.6-tb-mips.daemon.patch

How To Build

  • 2.6.8.1
$ tar jxf linux-2.6.8.1.tar.bz2
$ cd linux-2.6.8.1
$ patch -p1 < rbtx49.linux-2.6.8.1-2.patch

big endian
$ mkdir ../build_be
$ make SUBARCH=mips O=../build_be tx-r4k-be_defconfig
$ make SUBARCH=mips O=../build_be

little endian
$ mkdir ../build_le
$ make SUBARCH=mips O=../build_le tx-r4k_defconfig
$ make SUBARCH=mips O=../build_le
  • 2.6.9

We needed the patch for Makefile to build.

$ tar jxf linux-2.6.9.tar.bz2
$ cd linux-2.6.9
$ patch -p1 < rbtx49.linux-2.6.9-2.patch
$ patch -p1 < Makefile-mips.linux-2.6.9-1.patch

big endian
$ mkdir ../build_be
$ make SUBARCH=mips O=../build_be tx-r4k-be_defconfig
$ make SUBARCH=mips O=../build_be

little endian
$ mkdir ../build_le
$ make SUBARCH=mips O=../build_le tx-r4k_defconfig
$ make SUBARCH=mips O=../build_le
  • 2.6.10
$ tar jxf linux-2.6.10.tar.bz2
$ cd linux-2.6.10
$ patch -p1 < rbtx49.linux-2.6.10-2.patch

big endian
$ mkdir ../build_be
$ make SUBARCH=mips O=../build_be tx-r4k-be_defconfig
$ make SUBARCH=mips O=../build_be

little endian
$ mkdir ../build_le
$ make SUBARCH=mips O=../build_le tx-r4k_defconfig
$ make SUBARCH=mips O=../build_le
  • LTT on 2.6.10
  Kernel:
    # tar jxf linux-2.6.10.tar.bz2
    # cd linux-2.6.10
    # patch -p1 < rbtx49.linux-2.6.10-2.patch
    # patch -p1 < ltt-2.6.10-tb5-mips.patch
    edit .config to enable CONFIG_RELAYFS_FS and CONFIG_LTT.
    # make SUBARCH=mips rbtx49_defconfig
    # make

  LTT:
    # tar zxf TraceToolkit-0.9.6-tb.tar.gz
    # cd TraceToolkit-0.9.6
    # patch -p1 < TraceToolkit-0.9.6-tb-mips.daemon.patch
   - tracedaemon
      # ./configure --prefix=xx --target=mipsel-linux --host=mipsel-linux --build=`./config.guess` --without-glib --without-gtk
      # make -C LibUserTrace UserTrace.o
      # make -C LibUserTrace LDFLAGS="-static"
      # make -C Daemon LDFLAGS="-static"
   - tracevisualizer
      # ./configure --prefix=xx
      # make -C LibLTT LDFLAGS="-static"
      # make -C Visualizer LDFLAGS="-static"

Future Work

Here is a list of things that could be worked on for this feature: