Difference between revisions of "RCA DSB772WE Streaming Media Player"

From eLinux.org
Jump to: navigation, search
(Linux Support)
(Linux Support)
Line 53: Line 53:
  
 
== Linux Support ==
 
== Linux Support ==
* i have been able to boot a custom kernel using the BCM7635 code from [http://opendreambox.org/]
+
* i have been able to boot a custom kernel using the BCM7635 code from [http://opendreambox.org/ OpenDreamBox]
 
*[[file:RCA-DSB772WE-bootlog.txt|boot log]]
 
*[[file:RCA-DSB772WE-bootlog.txt|boot log]]
 
* root access is available
 
* root access is available

Revision as of 18:47, 4 December 2011

Description

The RCA Wi-Fi Streaming Media Player brings you a world of movies, TV shows, music, online apps and more — without monthly cable TV or satellite TV subscriptions. Just connect it to your Wi-Fi network, connect its 1080p HDMI output to your TV and you're ready to enjoy internet-connected content on your time and your terms. The product can instantly stream Netflix movies and TV shows (Netflix subscription required). You can rent or buy HD movies and TV shows from VUDU. You can also watch your favorite TV shows and movies on demand from Hulu Plus (subscription required). The player also delivers you a wealth of free services, such as YouTube, VUDU Apps, Pandora Internet Radio and Picasa.

Available from Wal-Mart.

NOTE: I have confirmed that this devices is using Linux Kernel 2.6.28.9 - see Linux Support below

Basic Info

  • Broadcom BCM7615 based - MIPS 24K based SoC
  • pads for two USB host interfaces
    • one unused and marked USB1
    • one used for the wifi module and marked USB0
  • pads for ethernet jack
  • pads Console UART
    • 3.3V TTL
    • can be interfaced using a USB->UART
  • one Hynix HY27UF082G2B NAND Flash (2Gbit - 256MB)
  • two Hynix H5TQ1G63DFR 1Gb DDR3 SDRAM
  • one 27MHz crystal
  • one TI DRV632 DirectPath™, 2-VRMS Line Driver With Adjustable Gain
  • one TI PCM1754 106dB SNR Stereo DAC (H/W Control)

Pictures

DSB772-1.jpg

DSB772-2.jpg

DSB772-3.jpg

DSB772-4.jpg

DSB772-5.jpg

Hacking

update/
update/squashfs-7615c0.img
update/cfe-2.1.13-7631-b1-v10-cfe-le-secure-signed.elf
update/vmlinuz-2628.9_760-7631
update/ucfe-2.1.13-7631-b1-v10-ucfe-le-secure-BK1-MFC-signed.bin
update/product_software_update.dat

Linux Support

(*) Direct/Interface: Loaded 'JPEG' implementation of 'IDirectFBImageProvider'.

(none) login: 
(none) login: 
(none) login: root
# ls -al
total 0
drwxr-xr-x  2 root root   3 Aug  9 12:23 .
drwx------ 16 root root 190 Nov 23 03:44 ..
# 
# 
# 
# ls -al
total 0
drwxr-xr-x  2 root root   3 Aug  9 12:23 .
drwx------ 16 root root 190 Nov 23 03:44 ..
# cd /
# ls
bin  etc      home  lib      mnt   root  share  tmp  var
dev  etc.img  init  libexec  proc  sbin  sys    usr
# 
  • partitions
# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /proc type proc (rw)
none on /dev/pts type devpts (rw,mode=600)
none on /var type tmpfs (rw,size=64k,mode=777)
none on /var/tmp type tmpfs (rw,size=64k,mode=777)
none on /etc/config type tmpfs (rw,size=64k,mode=777)
none on /sys type sysfs (rw)
/dev/mtdblock19 on /var/log type yaffs2 (rw)
/dev/mtdblock20 on /mnt/psnv type yaffs2 (rw)
/dev/mtdblock21 on /mnt/pstor type yaffs2 (rw)
# 
  • kernel boot log section
bitsPerSample 65535 != 16Loader:elf Filesys:raw Dev:flash0.vmlinux.1 File: Options:root=/dev/romblock12 rootfstype=squashfs ro  BDVD_BOOT_AUTOSTART=y BAPP_OUT=/dev/console panic=8
Loading: 0x80008000/5108544 0x804e7340/306944 
Successfully loaded secure elf image....
Entry address is 0x8000c870
Starting program at 0x8000c870

[    0.000000] -- DDR Bank 0: 128 MB
[    0.000000] -- DDR Bank 1: 128 MB
[    0.000000] Linux version 2.6.28.9 (root@stbcm-and-02) (gcc version 4.2.0 20070124 (prerelease) - BRCM 11ts-20090508) #760 Tue Aug 9 08:10:53 EDT 2011
[    0.000000] Kernel command line: root=/dev/romblock12 rootfstype=squashfs ro  BDVD_BOOT_AUTOSTART=y BAPP_OUT=/dev/console panic=8 console=0,115200n8 LD_BIND_NOW=on
[4294667.347000] DIGSIG: no valid key, digsig security disabled
[4294667.370000] checker_0 control 0x00000008 addr low 0x00002000 hi 0x003a9000 
[4294667.377000] read rights _0 0xffffffff _1 0xffffffff write rights _0 0x00000000 _1 0x00000000 
[4294667.386000] checker_1 control 0x00000008 addr low 0x003aa000 hi 0x0277ff80 
[4294667.393000] read rights _0 0xffffffff _1 0xffffffff write rights _0 0x28000000 _1 0x0001c9f1 
[4294667.402000] checker_2 control 0x00000008 addr low 0x20000000 hi 0x21cfff80 
[4294667.409000] read rights _0 0xffffffff _1 0xffffffff write rights _0 0x28000000 _1 0x0001c9f1 
[4294667.418000] checker_3 control 0x00000018 addr low 0x27d00000 hi 0x27dfff80 
[4294667.425000] read rights _0 0xffffffff _1 0xffffffff write rights _0 0x00000000 _1 0x00000200 
[4294667.453000] Driver 'sd' needs updating - please use bus_type methods
[4294667.460000] Driver 'sr' needs updating - please use bus_type methods
[4294667.466000] vide_ofe_probe: CHIP REV 0x76150020, REQUIRES 0x763xxxxx/0x764xxxxx
[4294667.474000] vide_ofe: unable to add platform device
[4294667.542000] Creating 28 MTD partitions on "bcm7xxx-nand":
[4294667.548000] 0x00000000-0x00180000 : "ucfe"
[4294667.553000] 0x00180000-0x00200000 : "drmregion"
[4294667.559000] 0x00200000-0x00280000 : "drmregion.1"
[4294667.565000] 0x00280000-0x00300000 : "rawnvr"
[4294667.570000] 0x00300000-0x00300090 : "macadr"
[4294667.574000] mtd: partition "macadr" doesn't end on an erase block -- force read-only
[4294667.583000] 0x00300090-0x00300800 : "nvram"
[4294667.587000] mtd: partition "nvram" doesn't start on an erase block boundary -- force read-only
[4294667.597000] 0x00300800-0x00400000 : "virtual"
[4294667.602000] mtd: partition "virtual" doesn't start on an erase block boundary -- force read-only
[4294667.611000] 0x00400000-0x00600000 : "cfe.0"
[4294667.616000] 0x00600000-0x00800000 : "cfe.1"
[4294667.622000] 0x00800000-0x00880000 : "vault-a"
[4294667.627000] 0x00880000-0x06080000 : "rootfs.0"
[4294667.633000] 0x06080000-0x06100000 : "vault-b"
[4294667.638000] 0x06100000-0x0b900000 : "rootfs.1"
[4294667.644000] 0x0b900000-0x0bd00000 : "vmlinux.0"
[4294667.650000] 0x0bd00000-0x0bd80000 : "vault-c"
[4294667.655000] 0x0bd80000-0x0c180000 : "vmlinux.1"
[4294667.661000] 0x0c180000-0x0c200000 : "paniclog"
[4294667.666000] 0x0c200000-0x0c280000 : "cfelog"
[4294667.671000] 0x0c280000-0x0c880000 : "splash"
[4294667.677000] 0x0c880000-0x0cc80000 : "syslog"
[4294667.682000] 0x0cc80000-0x0d080000 : "psnv"
[4294667.687000] 0x0d080000-0x0f600000 : "pstor"
[4294667.693000] 0x0f600000-0x0f900000 : "ofefw.0"
[4294667.698000] 0x0f900000-0x0fa00000 : "ofews.0"
[4294667.703000] 0x0fa00000-0x0fd00000 : "ofefw.1"
[4294667.709000] 0x0fd00000-0x0fe00000 : "ofews.1"
[4294667.714000] 0x00300000-0x00400000 : "config"
[4294667.720000] 0x00000000-0x0fe00000 : "all"
rcS: BDVD_BOOT_AUTOSTART<y>  BQ<y>  BAPP<./app_player>  BAPP_OUT</dev/console>  BNET<>  BNET_DLY<0> OFE_SB<y>
Mounting pstor, psnv with yaffs2!
rcS: Launch PSTOR mount in background

app_ofe_sb: Failed to create device node /tmp/vide_ofe_sb
  syslogd: cannot create /dev/log: Address already in use
Wed Jun 11 00:00:00 UTC 2008
[4294670.210000] bcmdriver: module license 'Proprietary' taints kernel.
[4294670.241000] BCMDRV: Initializing bcmdriver version $ bdvd_v3.0/6 $
[4294670.247000] BCMDRV: Using Interrupt Definition for 7631 (uname -a)
[4294670.254000] BCMDRV: Total intc words=2,Total Irqs=65
[4294670.259000] BCMDRV: Initialization complete...
/etc/init.d/rcS: : command not found
Auto startup
/etc/init.d/rcS: : command not found
/etc/init.d/rcS: : command not found
app 74016:00:06.726  -.--- main(): Application Started
app 74016:00:06.726 +0.000 Time from Startup to Application Start: 12.333 seconds