Difference between revisions of "SMN:SoundsCape"

From eLinux.org
Jump to: navigation, search
m (Undo revision 323138 by CoryHenderson (talk))
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Under Construction==
 
  
 
==Descriptions==
 
==Descriptions==
 
[[File:SoundsCape-01.jpg|border|right|link=|300px|SoundsCape]]
 
[[File:SoundsCape-01.jpg|border|right|link=|300px|SoundsCape]]
The BeagleBone LCD3 Cape provides a portable LCD solution with touchscreen capability for BeagleBone boards. The 3.5" TFT LCD screen, attached to the topside of the board, can display up to a resolution of 320x240 and is a 4-wire resistive touchscreen. The board is equipped with seven switches located at finger-friendly positions. These switches include power, reset, and five user switches, which are mapped to different GPIO signals. The backside of the cape is where a BeagleBone can be mounted.
+
SoundsCape is a BeagleBone Cape that adds analog audio I/O and bluetooth I/O for limitless audio possibilities. The analog section features an Analog Devices ADAU1361 codec capable of 96kHz, 24bit stereo audio. The Bluetooth section features a Panasonic PAN1323 Module which has BT 4.0 (BLE), Audio and Serial in/out via HCI, and ANT+.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
==FAQ==
 
Please visit our [http://elinux.org/BeagleBoardToys/FAQ#BeagleBone_LCD3_Cape Frequently Asked Questions (FAQ)] page for additional help.
 
  
 
==Revision Changes==
 
==Revision Changes==
Line 46: Line 31:
  
  
Following the instructions below to start using your BeagleBone LCD3 Cape:
+
Following the instructions below to start using your SoundsCape:
# Mount the BeagleBone to the connectors on the bottom side of the LCD3 Cape.
+
* ''Coming Soon''
# Make sure the SD card using with BeagleBone has image that supports LCD3 Cape.
 
# Plug in a 5V DC power supply to the DC connector on the BeagleBone.
 
# Following screens will be displayed on the LCD screen:
 
#* Angstrom log-in prompt
 
#* Auto Calibration utility (displays only on the first time)
 
# Follow the instructions given by the Auto Calibration utility to calibrate the LCD3 touchscreen.
 
# After calibrated, the Angstrom desktop will be displayed on the LCD screen.
 
 
 
You can start using the board.
 
 
 
 
 
 
 
  
 
==Specifications==
 
==Specifications==
Line 161: Line 134:
  
 
==Distributors==
 
==Distributors==
* [http://boardzoo.com/product_info.php?cPath=1&products_id=90 Boardzoo (USA)]
+
* [https://www.kickstarter.com/projects/148675608/soundscape-analog-and-bluetooth-audio-for-beaglebo Kickstarter]
* [http://components.arrow.com/part/detail/53596615S108809N8241 Arrow Electronics (US)]
 
* [http://www.digikey.com/product-detail/en/BB-BONE-LCD3-01/BB-BONE-LCD3-01-ND/3283809 Digi-Key (USA)]
 
* [http://www.mouser.com/ProductDetail/BeagleBoard-by-CircuitCo/BB-BONE-LCD3-01/?qs=sGAEpiMZZMuhmhJ32%2fprP445Y%252bG289B5 Mouser Electronics (USA)]
 
* [https://specialcomp.com/ Special Computing (USA)]
 
* [http://www.tigal.com/product/2628 Tigal (Austria)]
 
 
 
 
 
 
 
  
 
==Product Images==
 
==Product Images==
 
<gallery>
 
<gallery>
File:LCD3-Front.jpg|BeagleBone LCD3
+
File:SoundsCape-Top.jpg|Rev0 Top Side
File:Bottom-LCD3.jpg|Bottom side
+
File:SoundsCape-01.jpg|SoundsCape Rev0
File:LCD3-A2-Bottom.jpg|A2 Bottom side
 
 
</gallery>
 
</gallery>
 
 
 
 
  
 
==Documentations==
 
==Documentations==
  
 
===System Reference Manual===
 
===System Reference Manual===
* [https://github.com/CircuitCo/BeagleBone-LCD3/blob/master/BeagleBone-LCD3-RevA2-srm.pdf?raw=true Latest]
+
* ''Coming Soon''
  
  
 
===Hardware Files===
 
===Hardware Files===
====BeagleBone LCD3 Revision A2====
+
====SoundsCape Revision 1====
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA2/blob/master/BeagleBone-LCD3-RevA2-bom.xls?raw=true Bill of Materials]
+
* ''Coming Soon''
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA2/blob/master/BeagleBone-LCD3-RevA2-manufacturing.zip?raw=true Manufacturing Files]
 
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA2/blob/master/BeagleBone-LCD3-RevA2-schematic.pdf?raw=true Schematic (PDF)]
 
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA2/blob/master/BeagleBone-LCD3-RevA2-schematic.dsn?raw=true Schematic (OrCAD)]
 
To download all files at once please click [https://github.com/CircuitCo/BeagleBone-LCD3-RevA2/zipball/master here]
 
 
 
  
====BeagleBone LCD3 Revision A1====
+
====SoundsCape Revision 0====
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA1/blob/master/BeagleBone-LCD3-RevA1-bom.xls?raw=true Bill of Materials]
+
* ''Coming Soon''
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA1/blob/master/BeagleBone-LCD3-RevA1-manufacturing.zip?raw=true Manufacturing Files]
 
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA1/blob/master/BeagleBone-LCD3-RevA1-schematic.pdf?raw=true Schematic (PDF)]
 
* [https://github.com/CircuitCo/BeagleBone-LCD3-RevA1/blob/master/BeagleBone-LCD3-RevA1-schematic.dsn?raw=true Schematic (OrCAD)]
 
To download all files at once please click [https://github.com/CircuitCo/BeagleBone-LCD3-RevA1/zipball/master here]
 
  
  
To go back to the cape list, please click [http://elinux.org/BeagleBoardToys here]
+
To go back to the cape list, please click [http://elinux.org/Beagleboard:BeagleBone_Capes here]

Latest revision as of 13:02, 18 April 2014

Descriptions

SoundsCape

SoundsCape is a BeagleBone Cape that adds analog audio I/O and bluetooth I/O for limitless audio possibilities. The analog section features an Analog Devices ADAU1361 codec capable of 96kHz, 24bit stereo audio. The Bluetooth section features a Panasonic PAN1323 Module which has BT 4.0 (BLE), Audio and Serial in/out via HCI, and ANT+.

Revision Changes

Revision 1 (PENDING)

  • Add compatibility with LCD capes
  • Add dedicated LDOs for the Bluetooth Module and Codec


Revision 0

Initial release of SoundsCape Development only



Software Support


Please follow the instructions here to write the image file to your SD card on a Windows machine.

Getting Started

Required setup:

  • A SoundsCape
  • A BeagleBone (or BeagleBoneBlack) (with supported software)
  • A 5V DC power supply (we recommend 5V - >500mA)


Following the instructions below to start using your SoundsCape:

  • Coming Soon

Specifications

Followings are some specifications of the BeagleBone LCD3 Cape:

Electrical Specifications

Power 5V via BeagleBone header
3.3V via onboard LDOs
Codec Model Analog Devices ADAU1361
Codec Features Stereo 96kHz, 24-bit In/Out
Bluetooth Model Panasonic PAN1323
Bluetooth Features Bluetooth 4.0 (BLE), ANT+, All Bluetooth Profiles (including AVRCP, A2DP, SPP, HFP)
Indicators None
Switches One EEPROM address select DIP switch
Connectors Two 46-position male headers
One UART debug port (not populated)
One I2C debug port (not populated)


Mechanical Specifications

Size 3.40" x 2.15"
Layers 2
PCB Thickness .062"
RoHS Compliant Yes

Signal Usage

SoundsCape Pin Usage

The BeagleBone LCD3 Cape uses 16 signals including:

  • VDD_5V
  • DGND
  • SYSRESETn
  • GPIO1[28]
  • GPIO1[29]
  • I2C2_SCL
  • I2C2_SDA
  • McASP0_AHCLKX
  • McASP0_ACLKX
  • McASP0_FSX
  • McASP0_AXR1
  • McASP0_AXR2
  • UART5_TXD*
  • UART5_RXD*
  • UART5_CTSn*
  • UART5_RTSn*

*Can be disabled for LCD cape compatibility


EEPROM

EEPROM Suport Yes
Board Name Beaglebone SOUNDSCAPE
Version 00A1
Manufacturer SimpleMediaNetw
Part Number BB-SOUNDSCAPE
Pins Used 24


Distributors

Product Images

Documentations

System Reference Manual

  • Coming Soon


Hardware Files

SoundsCape Revision 1

  • Coming Soon

SoundsCape Revision 0

  • Coming Soon


To go back to the cape list, please click here