Difference between revisions of "SMN:SoundsCape"
(Signal & EEPROM) |
|||
Line 116: | Line 116: | ||
==Signal Usage== | ==Signal Usage== | ||
[[File:SoundsCapeRev1PinOut-01.png|right|link=|SoundsCape Pin Usage]] | [[File:SoundsCapeRev1PinOut-01.png|right|link=|SoundsCape Pin Usage]] | ||
− | The BeagleBone LCD3 Cape uses 16 | + | The BeagleBone LCD3 Cape uses 16 signals including: |
− | |||
* VDD_5V | * VDD_5V | ||
* DGND | * DGND |
Revision as of 12:25, 18 April 2014
Contents
Under Construction
Descriptions
The BeagleBone LCD3 Cape provides a portable LCD solution with touchscreen capability for BeagleBone boards. The 3.5" TFT LCD screen, attached to the topside of the board, can display up to a resolution of 320x240 and is a 4-wire resistive touchscreen. The board is equipped with seven switches located at finger-friendly positions. These switches include power, reset, and five user switches, which are mapped to different GPIO signals. The backside of the cape is where a BeagleBone can be mounted.
FAQ
Please visit our Frequently Asked Questions (FAQ) page for additional help.
Revision Changes
Revision 1 (PENDING)
- Add compatibility with LCD capes
- Add dedicated LDOs for the Bluetooth Module and Codec
Revision 0
Initial release of SoundsCape Development only
Software Support
- Not currently supported by official Angstrom releases
- When ready, images will be posted at our website: http://www.simplemedianetworks.com
Please follow the instructions here to write the image file to your SD card on a Windows machine.
Getting Started
Required setup:
- A SoundsCape
- A BeagleBone (or BeagleBoneBlack) (with supported software)
- A 5V DC power supply (we recommend 5V - >500mA)
Following the instructions below to start using your BeagleBone LCD3 Cape:
- Mount the BeagleBone to the connectors on the bottom side of the LCD3 Cape.
- Make sure the SD card using with BeagleBone has image that supports LCD3 Cape.
- Plug in a 5V DC power supply to the DC connector on the BeagleBone.
- Following screens will be displayed on the LCD screen:
- Angstrom log-in prompt
- Auto Calibration utility (displays only on the first time)
- Follow the instructions given by the Auto Calibration utility to calibrate the LCD3 touchscreen.
- After calibrated, the Angstrom desktop will be displayed on the LCD screen.
You can start using the board.
Specifications
Followings are some specifications of the BeagleBone LCD3 Cape:
Electrical Specifications
Power | 5V via BeagleBone header |
3.3V via onboard LDOs | |
Codec Model | Analog Devices ADAU1361 |
Codec Features | Stereo 96kHz, 24-bit In/Out |
Bluetooth Model | Panasonic PAN1323 |
Bluetooth Features | Bluetooth 4.0 (BLE), ANT+, All Bluetooth Profiles (including AVRCP, A2DP, SPP, HFP) |
Indicators | None |
Switches | One EEPROM address select DIP switch |
Connectors | Two 46-position male headers |
One UART debug port (not populated) | |
One I2C debug port (not populated) |
Mechanical Specifications
Size | 3.40" x 2.15" |
Layers | 2 |
PCB Thickness | .062" |
RoHS Compliant | Yes |
Signal Usage
The BeagleBone LCD3 Cape uses 16 signals including:
- VDD_5V
- DGND
- SYSRESETn
- GPIO1[28]
- GPIO1[29]
- I2C2_SCL
- I2C2_SDA
- McASP0_AHCLKX
- McASP0_ACLKX
- McASP0_FSX
- McASP0_AXR1
- McASP0_AXR2
- UART5_TXD*
- UART5_RXD*
- UART5_CTSn*
- UART5_RTSn*
*Can be disabled for LCD cape compatibility
EEPROM
EEPROM Suport | Yes |
Board Name | Beaglebone SOUNDSCAPE |
Version | 00A1 |
Manufacturer | SimpleMediaNetw |
Part Number | BB-SOUNDSCAPE |
Pins Used | 24 |
Distributors
- Boardzoo (USA)
- Arrow Electronics (US)
- Digi-Key (USA)
- Mouser Electronics (USA)
- Special Computing (USA)
- Tigal (Austria)
Product Images
Documentations
System Reference Manual
Hardware Files
BeagleBone LCD3 Revision A2
To download all files at once please click here
BeagleBone LCD3 Revision A1
To download all files at once please click here
To go back to the cape list, please click here