Difference between revisions of "SMN:SoundsCape"
m (→SoundsCape) |
(→Distributors) |
||
Line 161: | Line 161: | ||
==Distributors== | ==Distributors== | ||
− | * [ | + | * [https://www.kickstarter.com/projects/148675608/soundscape-analog-and-bluetooth-audio-for-beaglebo Kickstarter] |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==Product Images== | ==Product Images== |
Revision as of 12:28, 18 April 2014
Contents
Under Construction
Descriptions
The BeagleBone LCD3 Cape provides a portable LCD solution with touchscreen capability for BeagleBone boards. The 3.5" TFT LCD screen, attached to the topside of the board, can display up to a resolution of 320x240 and is a 4-wire resistive touchscreen. The board is equipped with seven switches located at finger-friendly positions. These switches include power, reset, and five user switches, which are mapped to different GPIO signals. The backside of the cape is where a BeagleBone can be mounted.
FAQ
Please visit our Frequently Asked Questions (FAQ) page for additional help.
Revision Changes
Revision 1 (PENDING)
- Add compatibility with LCD capes
- Add dedicated LDOs for the Bluetooth Module and Codec
Revision 0
Initial release of SoundsCape Development only
Software Support
- Not currently supported by official Angstrom releases
- When ready, images will be posted at our website: http://www.simplemedianetworks.com
Please follow the instructions here to write the image file to your SD card on a Windows machine.
Getting Started
Required setup:
- A SoundsCape
- A BeagleBone (or BeagleBoneBlack) (with supported software)
- A 5V DC power supply (we recommend 5V - >500mA)
Following the instructions below to start using your BeagleBone LCD3 Cape:
- Mount the BeagleBone to the connectors on the bottom side of the LCD3 Cape.
- Make sure the SD card using with BeagleBone has image that supports LCD3 Cape.
- Plug in a 5V DC power supply to the DC connector on the BeagleBone.
- Following screens will be displayed on the LCD screen:
- Angstrom log-in prompt
- Auto Calibration utility (displays only on the first time)
- Follow the instructions given by the Auto Calibration utility to calibrate the LCD3 touchscreen.
- After calibrated, the Angstrom desktop will be displayed on the LCD screen.
You can start using the board.
Specifications
Followings are some specifications of the BeagleBone LCD3 Cape:
Electrical Specifications
Power | 5V via BeagleBone header |
3.3V via onboard LDOs | |
Codec Model | Analog Devices ADAU1361 |
Codec Features | Stereo 96kHz, 24-bit In/Out |
Bluetooth Model | Panasonic PAN1323 |
Bluetooth Features | Bluetooth 4.0 (BLE), ANT+, All Bluetooth Profiles (including AVRCP, A2DP, SPP, HFP) |
Indicators | None |
Switches | One EEPROM address select DIP switch |
Connectors | Two 46-position male headers |
One UART debug port (not populated) | |
One I2C debug port (not populated) |
Mechanical Specifications
Size | 3.40" x 2.15" |
Layers | 2 |
PCB Thickness | .062" |
RoHS Compliant | Yes |
Signal Usage
The BeagleBone LCD3 Cape uses 16 signals including:
- VDD_5V
- DGND
- SYSRESETn
- GPIO1[28]
- GPIO1[29]
- I2C2_SCL
- I2C2_SDA
- McASP0_AHCLKX
- McASP0_ACLKX
- McASP0_FSX
- McASP0_AXR1
- McASP0_AXR2
- UART5_TXD*
- UART5_RXD*
- UART5_CTSn*
- UART5_RTSn*
*Can be disabled for LCD cape compatibility
EEPROM
EEPROM Suport | Yes |
Board Name | Beaglebone SOUNDSCAPE |
Version | 00A1 |
Manufacturer | SimpleMediaNetw |
Part Number | BB-SOUNDSCAPE |
Pins Used | 24 |
Distributors
Product Images
Documentations
System Reference Manual
- Coming Soon
Hardware Files
SoundsCape Revision 1
- Coming Soon
SoundsCape Revision 0
- Coming Soon
To go back to the cape list, please click here