eLinux.org - Changes related to "Category:Development Boards" [en]

RPi VerifiedPeripherals

2013-05-23T20:14:46Z

add Fingerprints scanners: Futronic F80, FS88 (devices were borrowed by Innovatrics).

RPi VerifiedPeripherals

2013-05-23T18:51:37Z

‎Working USB Wi-Fi Adapters:

RPi VerifiedPeripherals

2013-05-23T18:44:06Z

‎Working USB Wi-Fi Adapters:

RPi Distributions

2013-05-23T13:01:26Z

‎Comparison: Versions and Links update

RPi VerifiedPeripherals

2013-05-22T23:51:34Z

edit links

RPi Distributions

2013-05-22T18:25:38Z

BeagleBone

2013-05-22T04:35:57Z

‎Home page and Community:

BeagleBone

2013-05-20T16:45:05Z

Add a kernel/Capemgr section

Parallella Hardware

2013-05-20T15:50:49Z

Category:Parallella

2013-05-20T15:45:49Z

Created Parallella category page

New page

[[Category:Categories]]
[[Category:Linux]]
[[Category:Development Boards]]

BeagleBoardUbuntu

2013-05-20T15:27:33Z

wording...

BeagleBoardDebian

2013-05-20T15:26:53Z

‎Debian Wheezy snapshot: debian-7.0.0-console-armhf-2013-05-18

BeagleBoardUbuntu

2013-05-20T15:25:05Z

‎Quantal 12.10 armhf: ubuntu-12.10-console-armhf-2013-05-18

RPi Distributions

2013-05-20T11:07:51Z

uppdatera

RPi VerifiedPeripherals

2013-05-19T14:41:45Z

Updated WIFI adapters, Patriot Memory PCBOWAU2-N now works plug and play in 2013-02-09 Raspbian, also fixed broken link for Patriot Memory PCUSBW1150

RPi VerifiedPeripherals

2013-05-18T16:07:39Z

‎Working Bluetooth adapters:

RPi Distributions

2013-05-18T14:22:02Z

RPi VerifiedPeripherals

2013-05-18T13:45:35Z

‎Working USB Keyboards: - SolidTek

RPi Distributions

2013-05-17T07:02:43Z

‎Available Distributions:

RPi VerifiedPeripherals

2013-05-16T20:54:48Z

‎Working USB Hubs: DUB-H7: It's recommended that the total power consumption of the connected USB devices should not exceed 2.4 A, or 12 W.

BeagleBone

2013-05-16T20:12:03Z

Removed the reference to my github repo for buildroot. All changes have been merged upstream and many improvements have been added, so people should go there instead.

@@ Line 2,692: / Line 2,692: @@
 * TEMPer1 (id: 0c45:7401)
 ** works out of the box on raspbian/wheezy with [https://github.com/petervojtek/usb-thermometer pcsensors library]
 == PS2 / AT to USB Converters ==

@@ Line 1,706: / Line 1,706: @@
 * '''ZyXEL'''
 ** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)
 ** [http://www.zyxel.com/products_services/g_202.shtml G-202] model 0586:3410 ZyXEL Communications Corp. ZyAIR G-202 802.11bg using zd1211rw kernel module and zd1211-firmware package

@@ Line 1,575: / Line 1,575: @@
 * '''GMYLE'''
 **  Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.
 * '''Hawking'''

@@ Line 228: / Line 228: @@
 |-
 | [http://openelec.tv/component/k2/item/235-openelec-on-raspberry-pi-our-first-arm-device-supported OpenELEC]
-| 2013-03-25 (3.0.0)
+| 2013-05-17 (3.0.3)
 | 2012-05-10
 | Linux 3.6.11 (embedded)
 | [http://www.opensource.org/licenses/index.html OSI mixed] (GPLv2 BSD etc)
-| 85 MiB (inc. XBMC)
+| 88 MiB (incl. XBMC)
 | {{yes}}
-| [http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi install instructions]<br />
+| [http://www.openelec.tv/get-openelec/download/viewcategory/10-raspberry-pi-builds - Official Downloadsite]<br />
-[http://openelec.tv/component/k2/item/241-openelec-meets-raspberry-pi-part-1 build instructions - part 1]<br />[http://openelec.tv/component/k2/item/242-openelec-meets-raspberry-pi-part-2 build instructions - part 2]<br />[http://sources.openelec.tv/tmp/image/openelec-rpi/ official builds]<br />[http://sparky0815.de/openelec-download-images-fat-files/ raw image (unofficial)]
+[http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi - Install instructions]<br />
 | [https://github.com/OpenELEC/OpenELEC.tv/tree/master/packages ~{{formatnum:140}}] (+ [http://wiki.openelec.tv/index.php?title=OpenELEC_Addons_(official) 7] via xbmc)
 | root:openelec<br/>(ssh only)

@@ Line 2,717: / Line 2,717: @@
 Pi Supply offers a 5.25V (+-0.25v) 1500mA power supply, manufactured specially for the Raspberry Pi to account for voltage drop due to the high current draw of the Raspberry Pi when compared to typical (phone charging etc.) duties. This is available in four varieties :
-* [http://www.pi-supply.com/ UK]
+* [http://www.pi-supply.com/product/uk-micro-usb-raspberry-pi-power-supply-5v-1500ma/ UK]
-* [http://www.pi-supply.com/ EU]
+* [http://www.pi-supply.com/product/european-eu-micro-usb-raspberry-pi-power-supply-5v-1500ma/ EU]
-* [http://www.pi-supply.com/ USA]
+* [http://www.pi-supply.com/product/american-usa-micro-usb-raspberry-pi-power-supply-5v-1500ma/ USA]
-* [http://www.pi-supply.com/ AUS]
+* [http://www.pi-supply.com/product/australian-aus-micro-usb-raspberry-pi-power-supply-5v-1500ma/ AUS]
 The Pi Hut offers a 5V 1500mA power supply, manufactured specially for the Raspberry Pi. This is available in three varieties :
@@ Line 2,839: / Line 2,839: @@
 ** Switching Power Supply. Model: PSAC09R-050. Output: 5&nbsp;V, 1.8&nbsp;A, microUSB.  [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]
 * '''Pi Supply'''
-** [http://www.pi-supply.com/ 5.25V 1.5A Raspberry Pi USB Power Supply] Comes in 4 varieties for worldwide compatibility - UK, European (EU), American (USA) and Australian (AUS). Is of the detachable USB type so can double up as iPhone/Smartphone charger.
+** [http://www.pi-supply.com/product-category/raspberry-pi-power-supplies/ 5.25V 1.5A Raspberry Pi USB Power Supply] Comes in 4 varieties for worldwide compatibility - UK, European (EU), American (USA) and Australian (AUS). Is of the detachable USB type so can double up as iPhone/Smartphone charger.
 * '''PortaPow'''
 ** PortaPow UK Mains Wall Power Supply

← Older revision	Revision as of 18:25, 22 May 2013
(One intermediate revision by one user not shown)

@@ Line 277: / Line 277: @@
 = Links =
-== Home page and Community ==
+== Home site and Community ==
 * [http://beagleboard.org/ beagleboard.org] -- home for BeagleBoard and BeagleBone products
 * [http://beagleboard.org/Products/BeagleBone%20Black BeagleBone Black] -- manufacturer's page for the second BeagleBone board
@@ Line 288: / Line 288: @@
 * [https://www.linux.com/news/embedded-mobile/mobile-linux/715298-45-beaglebone-black-keeps-eyes-on-raspberry-pi Linux.com report on BeagleBone Black] -- with words from beagleBoard.org's cofounder Jason Kridner
 * [https://github.com/selsinork/beaglebone-black-pinmux github.com/selsinork/beaglebone-black-pinmux] -- pinmux data for BeagleBone Black, including extraction scripts
 == Tutorials and Videos ==

@@ Line 262: / Line 262: @@
 * Download Netbeans (Windows/Linux/OS-X/Solaris): http://www.netbeans.org/
 * Example tutorial on setting this up: http://mechomaniac.com/BeagleboardDevelopmentWithNetbeans
 = FAQ =

← Older revision		Revision as of 15:50, 20 May 2013
Line 1:		Line 1:
−	[[Category: Parallella]]	+	[[Category:Parallella]]
		+	[[Category:Linux]]
		+	[[Category:Development Boards]]

	==Introduction==		==Introduction==

@@ Line 104: / Line 104: @@
 Services Active:
   Note: Depending on your internal network these may work out the box
-  Apache, Port 80: http://arm/ (Bone: or via usb) http://192.168.7.2
+  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm (Bone: or via usb) ubuntu@192.168.7.2
+  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
-  shellinabox, Port 4200: https://arm:4200/ (Bone: or via usb) https://192.168.7.2:4200
+  shellinabox, Port 4200: https://arm:4200/ (Bone: via usb) https://192.168.7.2:4200
   Getty, Serial Port

@@ Line 73: / Line 73: @@
 Image Updated:
 *2013-04-26
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 80: / Line 84: @@
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 Services Active:
   Note: Depending on your internal network these may work out the box
-  Apache, Port 80: http://arm/
+  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm
+  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
   Getty, Serial Port
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-wheezy-console-armhf-2013-04-26.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/wheezy/debian-7.0.0-console-armhf-2013-05-18.tar.xz
 Verify Image with:
-  md5sum debian-wheezy-console-armhf-2013-04-26.tar.xz
+  md5sum debian-7.0.0-console-armhf-2013-05-18.tar.xz
-a1c4ff53f3b2a42419ee1c7c1f47e40  debian-wheezy-console-armhf-2013-04-26.tar.xz
+  dfe308e3e534d8adef75db5308174cf6  debian-7.0.0-console-armhf-2013-05-18.tar.xz
 Unpack Image:
-  tar xJf debian-wheezy-console-armhf-2013-04-26.tar.xz
+  tar xJf debian-7.0.0-console-armhf-2013-05-18.tar.xz
-  cd debian-wheezy-console-armhf-2013-04-26
+  cd debian-7.0.0-console-armhf-2013-05-18
 Install Image:

@@ Line 90: / Line 90: @@
 === Raring 13.04 armhf ===
 Image Updated:
 *2013-04-26
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 97: / Line 101: @@
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 Services Active:
   Note: Depending on your internal network these may work out the box
-  Apache, Port 80: http://arm/
+  Apache, Port 80: http://arm/ (Bone: or via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm
+  SSH, Port 22: ssh ubuntu@arm (Bone: or via usb) ubuntu@192.168.7.2
   Getty, Serial Port
@@ Line 111: / Line 113: @@
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-13.04-console-armhf-2013-05-18.tar.xz
   mirrors (will take some time to update):
-  wget http://ynezz.ibawizard.net/beagleboard/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  wget http://ynezz.ibawizard.net/beagleboard/raring/ubuntu-13.04-console-armhf-2013-05-18.tar.xz
 Verify image with:
-  md5sum ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  md5sum ubuntu-13.04-console-armhf-2013-05-18.tar.xz
-  e54b8693cb92b40d694e5885e4a1b86c  ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+c791b69ee4c6ddfd1ce4c9049ecf23e  ubuntu-13.04-console-armhf-2013-05-18.tar.xz
 Unpack image:
-  tar xJf ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  tar xJf ubuntu-13.04-console-armhf-2013-05-18.tar.xz
-  cd ubuntu-13.04-console-armhf-2013-04-26
+  cd ubuntu-13.04-console-armhf-2013-05-18
 If you don't know the location of your SD card:
@@ Line 202: / Line 204: @@
   git clone git://github.com/RobertCNelson/omap-image-builder.git
   cd omap-image-builder
-  git checkout v2013.04 -b v2013.04
+  git checkout v2013.05 -b v2013.05
   touch release
   ./build_image.sh
@@ Line 209: / Line 211: @@
 Image Updated:
 *2013-04-26
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 216: / Line 222: @@
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-05-18.tar.xz
 Verify image with:
-  md5sum ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  md5sum ubuntu-12.10-console-armhf-2013-05-18.tar.xz
-  b7cd2f94c0dbc75f8d6897e559d52c0a  ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  feb3e41208dba6ec1593ac0b910cff3d  ubuntu-12.10-console-armhf-2013-05-18.tar.xz
 Unpack image:
-  tar xJf ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  tar xJf ubuntu-12.10-console-armhf-2013-05-18.tar.xz
-  cd ubuntu-12.10-console-armhf-2013-04-26
+  cd ubuntu-12.10-console-armhf-2013-05-18
 Then follow directions show above with the other images...

@@ Line 396: / Line 396: @@
 ==BerryTerminal==
 BerryTerminal is a minimal Linux distribution designed to turn the Raspberry Pi mini computer into a low-cost thin client.
- It allows users to login to a central Edubuntu or other LTSP server, and run applications on the central server
+It allows users to login to a central Edubuntu or other LTSP server, and run applications on the central server
 *[http://www.berryterminal.com/doku.php Main Site]
 *[http://dl.berryboot.com/berryterminal-20130321.zip Download]
@@ Line 404: / Line 404: @@
 [http://www.geexbox.org/category/arm/ http://www.geexbox.org/category/arm/]
 ==DarkElec==
 None of the currently available solutions do a perfect job with running XBMC on the Pi, however OpenELEC comes by far the closest, in spite of its locked down nature.

@@ Line 1,622: / Line 1,622: @@
 * '''Patriot Memory'''
-** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=1198&type=24 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
-** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=973&type=24 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Worked immedietly, plug and play in 2013-02-09 Raspbian via powered USB hub.
 * '''Ralink'''

@@ Line 1,766: / Line 1,766: @@
 * IOGear GBU321 (Broadcom BCM2045 Chipset)
 ** Works with Raspbian Wheezy directly attached to Raspberry Pi and via powered USB hub.
 * Trust BT-2400p
 ** Working well with Raspbian Wheezy directly attached to Raspberry Pi. Using with sma-Bluetooth (SMA Solar Inverter reading software).
@@ Line 1,780: / Line 1,781: @@
 ** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.
 ** [http://dx.com/p/super-mini-bluetooth-2-0-adapter-dongle-vista-compatible-11866 Super Mini Bluetooth 2.0 Dongle]. The device is recognized and after installing bluez-firmware you can bring it up with hcitool hci0 up. However whenever you try to pair with any device it will cause kernel panic and lock up the system. Confirmed on Raspbian, RaspBMC. The device is a counterfeit Cambridge Silicon Radio device, probably with several bugs in it causing lockups.
-* Asus USB-BT211
+* '''Asus USB-BT211'''
 ** Shows up as HCI device in Raspbian, but it does not scan or pair.
 ** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962
 == USB Ethernet adapters ==

@@ Line 394: / Line 394: @@
 *[http://rpitc.blogspot.se/ Homepage]
 *[http://rpitc.blogspot.se/p/download.html Dowload]
 ==GeeXboX ARM==
@@ Line 489: / Line 494: @@
 This debian squeeze image created to perform "pwn plug" type of attacks using Raspberry pi.
 pleas look at the wiki for further details [https://sourceforge.net/p/ha-pi/wiki/Home/ Wiki]
 ==Bodhi==

@@ Line 1,082: / Line 1,082: @@
 ** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B)
-*'''SolidTek'''
+*'''[http://www.solidtekusa.com/ SolidTek]'''
-** Solid Tek KB-P3100BU ASK-3100U.
+** SolidTek KB-P3100BU ASK-3100U.
 *'''Sony'''

@@ Line 371: / Line 371: @@
 |USB 2.0
 |7-Port
-|3.0&nbsp;A
+|2.4&nbsp;A
 |Verified
-|[http://www.misco.co.uk/product/94282/D-Link-7-Port-USB-Hub] Power USB slots can be used to power Raspberry Pi.
+|[http://www.dlink.com/us/en/home-solutions/connect/usb/dub-h7-7-port-usb-2-0-hub] Power USB slots can be used to power Raspberry Pi.
 |- valign="top" align="left" style="background: #F5FAFF;"

@@ Line 216: / Line 216: @@
 === Buildroot ===
 * Home site:  http://www.zoobab.com/beaglebone
 * Buildroot project site: http://buildroot.uclibc.org/
 Buildroot is a set of Makefiles and patches that makes it easy to generate a complete embedded Linux system. Buildroot can generate any or all of a cross-compilation toolchain, a root filesystem, a kernel image and a bootloader image. Buildroot is useful mainly for people working with small or embedded systems, using various CPU architectures (x86, ARM, MIPS, PowerPC, etc.) : it automates the building process of your embedded system and eases the cross-compilation process.