Difference between revisions of "Tadpole Lure"
(→R1 12 Ohm Resistor) |
(→R4/R5/R6 4.7K Ohm Resistors) |
||
Line 69: | Line 69: | ||
== R4/R5/R6 4.7K Ohm Resistors == | == R4/R5/R6 4.7K Ohm Resistors == | ||
[[File:Tadpole-4k7ohm.jpg|220px||right|4.7K Ohm Resistors]] | [[File:Tadpole-4k7ohm.jpg|220px||right|4.7K Ohm Resistors]] | ||
+ | There are three resistors with the color code YELLOW-VIOLET-RED. These are used for the resistor positions marked R4, R4 and R5. | ||
<br> | <br> | ||
<br> | <br> | ||
Line 77: | Line 78: | ||
<br> | <br> | ||
<br> | <br> | ||
+ | |||
== RGB LED == | == RGB LED == | ||
[[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]] | [[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]] |
Revision as of 15:26, 24 March 2015
Contents
Description
The Tadpole Lure is a low cost "Micro-Lure" design that providing a single RGB LED and a breakout/prototype area.
Components
- 3 2N3906 PNP Transistors
- 1 RGB LED
- 1 12 Ohm 1/8 Resistor
- 2 68 Ohm 1/8 Resistors
- 3 4.7k Ohm 1/8 Resistors
- 1 2x13 0.1" Female Connector
- 1 PCB
Design Files
Assembly
Getting Started
R1 12 Ohm Resistor
There is a single resistor with the color code BROWN-RED-BLACK. This one is used for the resistor position marked R1.
R2/R3 68 Ohm Resistors
There are two resistors with the color code BLUE-GREY-BLACK. These are used for resistor positions marked R2 and R3.
R4/R5/R6 4.7K Ohm Resistors
There are three resistors with the color code YELLOW-VIOLET-RED. These are used for the resistor positions marked R4, R4 and R5.
RGB LED
Transistors
Connector