Difference between revisions of "Tadpole Lure"
(→R4/R5/R6 4.7K Ohm Resistors) |
(→RGB LED) |
||
Line 82: | Line 82: | ||
[[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]] | [[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]] | ||
[[File:Tadpole-led.jpg|220px|right|RGB LED]] | [[File:Tadpole-led.jpg|220px|right|RGB LED]] | ||
+ | The single RGB LED in the kit is mounted with the longest lead as the second hold from the side with a flat edge. The LED package has a flat side. The flat side is matched up with the white line marking on the PCB. | ||
<br> | <br> | ||
<br> | <br> | ||
Line 93: | Line 94: | ||
<br> | <br> | ||
<br> | <br> | ||
+ | |||
== Transistors == | == Transistors == | ||
[[File:Tadpole-transistors.jpg|220px|right|Transistors]] | [[File:Tadpole-transistors.jpg|220px|right|Transistors]] |
Revision as of 15:28, 24 March 2015
Contents
Description
The Tadpole Lure is a low cost "Micro-Lure" design that providing a single RGB LED and a breakout/prototype area.
Components
- 3 2N3906 PNP Transistors
- 1 RGB LED
- 1 12 Ohm 1/8 Resistor
- 2 68 Ohm 1/8 Resistors
- 3 4.7k Ohm 1/8 Resistors
- 1 2x13 0.1" Female Connector
- 1 PCB
Design Files
Assembly
Getting Started
R1 12 Ohm Resistor
There is a single resistor with the color code BROWN-RED-BLACK. This one is used for the resistor position marked R1.
R2/R3 68 Ohm Resistors
There are two resistors with the color code BLUE-GREY-BLACK. These are used for resistor positions marked R2 and R3.
R4/R5/R6 4.7K Ohm Resistors
There are three resistors with the color code YELLOW-VIOLET-RED. These are used for the resistor positions marked R4, R4 and R5.
RGB LED
The single RGB LED in the kit is mounted with the longest lead as the second hold from the side with a flat edge. The LED package has a flat side. The flat side is matched up with the white line marking on the PCB.
Transistors
Connector