Arduino Shield Adapter
From User talk:Impressx
Contents
Description[edit]
The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.
Specifications[edit]
Electrical Specifications[edit]
Power Supply | 3.3V from BeagleBone Black and 5V from external Vcc Connector on BeagleBone Black |
Indication | 2 orange LED indicating 3.3V and 5V supply |
Connectors | 14 digital I/O |
6 analog inputs | |
1 I2C bus | |
optionally: 16 pin I/O expander |
Mechanical Specifications[edit]
Size | 86.5mm x 58.5mm |
Layers | 2 |
PCB Thickness | 1.6mm |
RoHS Compliant | Yes |
EEPROM[edit]
EEPROM Suport | Yes |
Board Name | BeagleIO |
Version | A2 |
Manufacturer | impressx/SBT |
Part Number | BeagleIO |
Pins Used | 36 pins incl. Optional |
Documentations[edit]
Open Source | No |
System Reference Manual | Not yet ready |
Schematics | No |
PCB Files | No |
Gerber Files | No |
Bills of Materials | No |
Vendors[edit]
Manufacturer's Link[edit]
For more information about this cape, please visit Impressx
To go back to the cape list, please click BeagleBone Capes