Difference between revisions of "WandBoard"

From eLinux.org
Jump to: navigation, search
(Created page with "The http://wandboard.org WandBoard is a very low-cost development platform based on the Freescale i.MX6 processor. = Hardware = There are currently two versions of WandB...")
 
(All content copied to Wandboard, so {{Delete}})
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
{{Delete}}
 +
 
The [[http://wandboard.org WandBoard]] is a very low-cost development platform based on the Freescale i.MX6 processor.
 
The [[http://wandboard.org WandBoard]] is a very low-cost development platform based on the Freescale i.MX6 processor.
  
Line 7: Line 9:
 
[[File:WandBoard_front.jpg]]
 
[[File:WandBoard_front.jpg]]
 
[[File:WandBoard_back.jpg]]
 
[[File:WandBoard_back.jpg]]
 +
  
 
== EDM module ==
 
== EDM module ==
  
* Freescale i.MX6 CPU (ARM Cortex A9)
+
* [[Freescale]] [[i.MX6]] [[CPU]] ([[ARM]] Cortex A9)
 
** i.MX6 Solo (single core) on "Solo" version
 
** i.MX6 Solo (single core) on "Solo" version
 
** i.MX6 Dual Lite (dual core) on "Dual" version
 
** i.MX6 Dual Lite (dual core) on "Dual" version
** Vivante GPU
+
** [[Vivante]] GPU:
 +
*** 3D core: GC880 @ @ 533MHz, 1 shader core 4.8 GFLOPS
 +
*** 2D core: GC320 composition engine
 
* DDR3 RAM
 
* DDR3 RAM
 
** 512 MB on "Solo" version (two 2Gbit chips)
 
** 512 MB on "Solo" version (two 2Gbit chips)
Line 22: Line 27:
 
* Flat cable connector for camera (CSI, I2C2, GPIO)
 
* Flat cable connector for camera (CSI, I2C2, GPIO)
 
* Power circuit (5V input)
 
* Power circuit (5V input)
 +
  
 
== Motherboard ==
 
== Motherboard ==
Line 31: Line 37:
 
* MicroSD card slot (at SD1)
 
* MicroSD card slot (at SD1)
 
* UART DB9 connector (at UART1 via ADM3202)
 
* UART DB9 connector (at UART1 via ADM3202)
* Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks)
+
* Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks and optical)
 
* 5VDC power barrel connector
 
* 5VDC power barrel connector
 
* SATA connector (probably unpopulated, reserved for future use; no SATA on i.MX6 Solo and Dual Lite)
 
* SATA connector (probably unpopulated, reserved for future use; no SATA on i.MX6 Solo and Dual Lite)
Line 39: Line 45:
 
** Rest of FPD data lines, FPD control lines, +3V3, three I2C interfaces
 
** Rest of FPD data lines, FPD control lines, +3V3, three I2C interfaces
 
** One SPI (with two CS), 8 GPIO lines, +5V
 
** One SPI (with two CS), 8 GPIO lines, +5V
 +
  
 
= Availability =
 
= Availability =
  
 
As of Jan 17, 2013 preorder only. Prices are 69 USD for Solo and 89 USD for Dual. First boards seem to be shipped to partner developers.
 
As of Jan 17, 2013 preorder only. Prices are 69 USD for Solo and 89 USD for Dual. First boards seem to be shipped to partner developers.
 +
  
 
= Community =
 
= Community =
 
   
 
   
 
* Website: [http://wandboard.org http://wandboard.org]
 
* Website: [http://wandboard.org http://wandboard.org]
 +
  
 
[[category:Development Boards]]
 
[[category:Development Boards]]
 +
[[category:Hardware]]
 +
[[category:SBC]]
 +
[[category:ARM]]

Latest revision as of 11:54, 16 May 2019

Edit-clear.png

This page may be a candidate for speedy deletion. Please discuss the issue on the talk page, or delete if you are an administrator.


The [WandBoard] is a very low-cost development platform based on the Freescale i.MX6 processor.

Hardware

There are currently two versions of WandBoard, "Solo" and "Dual". The WandBoard itself is a System-On-Module of the EDM standard that comes with a matching motherboard. The motherboard is quite trivial and is the same for both versions of the WandBoard.

WandBoard front.jpg WandBoard back.jpg


EDM module

  • Freescale i.MX6 CPU (ARM Cortex A9)
    • i.MX6 Solo (single core) on "Solo" version
    • i.MX6 Dual Lite (dual core) on "Dual" version
    • Vivante GPU:
      • 3D core: GC880 @ @ 533MHz, 1 shader core 4.8 GFLOPS
      • 2D core: GC320 composition engine
  • DDR3 RAM
    • 512 MB on "Solo" version (two 2Gbit chips)
    • 1 Gigabyte on "Dual" version (four 2Gbit chips)
  • MicroSD card slot (bootable, at SD3 of the CPU)
  • AR8031 Gigabit LAN
  • BCM4329 Wi-Fi+Bluetooth (at SD2, UART3, AUD5; unpopulated on "Solo" version)
  • Flat cable connector for camera (CSI, I2C2, GPIO)
  • Power circuit (5V input)


Motherboard

  • Gigabit LAN connector
  • HDMI connector
  • USB host connector (USB3 for future use but currently in USB2 mode only)
  • USB OTG connector
  • MicroSD card slot (at SD1)
  • UART DB9 connector (at UART1 via ADM3202)
  • Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks and optical)
  • 5VDC power barrel connector
  • SATA connector (probably unpopulated, reserved for future use; no SATA on i.MX6 Solo and Dual Lite)
  • Four 1.27mm 2x10 expansion headers:
    • LVDS0 (4 signal pairs + clock), +3V3
    • Flat panel display data lines (24 bit total); no power or GND at this header
    • Rest of FPD data lines, FPD control lines, +3V3, three I2C interfaces
    • One SPI (with two CS), 8 GPIO lines, +5V


Availability

As of Jan 17, 2013 preorder only. Prices are 69 USD for Solo and 89 USD for Dual. First boards seem to be shipped to partner developers.


Community