JuiceBox Dmesg Comp
This was taken from the Discussion Forum posted by greghol:
Linux version 2.4.24-uc0 (gregh@arm7) (gcc version 2.95.3 20010315 (release)5 Processor: Samsung S3C44B0X revision 0 Architecture: S3C44B0X On node 0 totalpages: 1009 zone(0): 0 pages. zone(1): 1009 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 Calibrating delay loop... 29.79 BogoMIPS Memory: 3MB = 3MB total Memory: 3200KB available (470K code, 280K data, 32K init) Dentry cache hash table entries: 512 (order: 0, 4096 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 1024 (order: 0, 4096 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Samsung S3C44B0X UART driver version 0.1 <thomas.eschenbacher@sympat.de> ttyS0 (irq = 3) is a builtin Samsung S3C44B0X UART Samsung s3c44b0x 4096 color STN driver frame buffer: 0x0C3F1F00 Cirrus Logic CS43L43 Stereo DAC with Headphone Amp Function keys for Toymaker video player Power Management for Toymaker video player Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: 100000-1FFFFF [VIRTUAL 100000-1FFFFF] (RO) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (romfs filesystem) readonly. Shell invoked to run file: /etc/rc Command: hostname TCE44B0 Command: /bin/expand /etc/ramfs.img /dev/ram0 Can't open expanded file /dev/ram0 pid 8: failed 768 Command: mount -t proc proc /proc Command: mount -t ext2 /dev/ram0 /var mount failed: No such device Command: mkdir /var/config /var/config: Read-only file system Command: mkdir /var/tmp /var/tmp: Read-only file system Command: mkdir /var/log /var/log: Read-only file system Command: mkdir /var/run /var/run: Read-only file system Command: mkdir /var/lock /var/lock: Read-only file system Command: #dhcpcd eth0 & Command: #dhcpcd -p -a eth0 & Command: #ifconfig lo 127.0.0.1 Command: #route add -net 127.0.0.0 netmask 255.255.255.0 lo Command: #dhcpcd & Command: #ifconfig eth0 192.168.0.128 Command: Command: #dhcpcd & Command: ifconfig eth0 192.168.0.128 No support for INET on this system. pid 9: failed 256 Command: route add -net 192.0.0.0 netmask 255.0.0.0 eth0 socket: Address family not supported by protocol pid 10: failed 1792 Command: ifconfig lo 127.0.0.1 No support for INET on this system. pid 11: failed 256 Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo socket: Address family not supported by protocol pid 12: failed 1792 Command: Execution Finished, Exiting Sash command shell (version 1.1.1) />