R-Car/Boards/Yocto-Gen3-CommonFAQ/Minimonitor shows other board name despite of using Starter Kit + Kingfisher.

From eLinux.org
Jump to: navigation, search

Minimonitor shows other board name despite of using Starter Kit + Kingfisher.

This issue is caused when using old Minimonitor which version is earlier than 3.02.
Minimonitor which version is 3.02 or later works correctly with Starter Kit + Kingfisher,
so it needs to update it.
Please refer to the R-Car/Boards/Kingfisher#How_to_update_of_Sample_Loader_and_MiniMonitor.

Ex) R-Car M3 Starter Kit (Type Name : RTP0RC7796SKBX0010SA09)

KRIEK M3 SAMPLE LOADER V0.19 2016.10.20
 CPU   : AArch64 CA57
 DRAM  : LPDDR4 DDR3200 DEVICE: QSPI Flash(S25FS128) at 40MHz DMA
 BOOT  : Normal Boot
 Backup: DDR Cold Boot

jump to 0xE6330000

KRIEK M3 MiniMonitor V0.19 2016.10.20
 Work Memory SystemRAM (H'E6328000-H'E632FFFF)
>