RPi Expansion Boards by Manufacturer

From eLinux.org
Jump to: navigation, search

Contents

Amescon

RasPiComm

RasPiComm

The RasPiComm by Amescon is a piggyback-mountable extension board and offers:

  • RS-485
  • RS-232
  • RTC
  • direct I2C connector
  • 5-way joystick

with driver support. Fully compatible with the B+!

More information: Technical Specifications.

RasPiComm+

RasPiComm+ mainboard with 4 modules (not attached)

The RasPiComm+ by Amescon is a modular extension board for the Raspberry Pi and offers:

  • 4 module slots for a wide range of modules (RS-232, RS-485 4 Wire, GSM, GPS, 1Wire, CAN, 8 Input, 8 Output, 16 isolated I/O, Profibus,...)
  • RTC
  • easy to set up
  • full driver support
  • industrial version for isolated 24V available

The RasPiComm+ will be launched Q1 2015. If you want to have it before the official launch, you can support the Indiegogo campaign.







Ardhat

Ardhat is a HAT compliant Smart Power, Robotics and IoT Platform for the Raspberry Pi


Ardhat with Arduino Motor Shield
Ardhat with A+ and Solar Panel
Ardhat with Lego EV3 Mindstorms

Hardware Features

  • Integrated 16MHz Arduino compatible processor
  • Accepts 5V Arduino shields, but also available with long -tail HAT header pins for HAT expansion.
  • 12 ch PWM O/P, 6 ch analog I/P
  • Real-time Clock
  • External 8-28V power input
  • High Power 3A 5V O/P
  • Full BBU/UPS
  • 10-DOF Sensor Fusion
  • Long Range Wireless Mesh up to 15km
  • Built-in 2050mAH battery
  • Barometer
  • Thermometer
  • Programmable Power/Navigation combo switch
  • ‘Zero CPU’ SmartLED driver
  • Ext and LiPo voltage monitors
  • Charge status & programmable LEDS
  • Programmable wakeup/watchdog
  • > 1,000 hour sleep mode operation
  • Fully RPi HAT standard compliant (with EEPROM)
  • Standard LiPo battery connector
  • Uses standard Arduino IDE
  • PiBow 'TopHat' available to provide physical protection
  • HAT compliant device-tree EEPROM


Software

The preferred environment for programming Ardhat is javascript, using node.js with Johnny Five, though Python and C/C++ bindings are also available, see Ardhat Github.

The Ardhat Real-Time is supplied as a preloaded sketch that includes a co-operative multitasking scheduler and utility functions, which can be modified as required using the Arduino IDE. It uses ~2kB of Arduino program space.

The basic functions include:

  • Internal & external supply voltage monitoring
  • Sensor Fusion monitoring
  • Power/Navigation switch monitoring
  • Real-time clock monitoring
  • Status reporting to Raspberry Pi over Firmata
  • Raspberry Pi status monitoring
  • Sleep/Power Down Management
  • Wakeup scheduling


Audio Injector

Audio Injector zero sound card

Audio injector raspberry pi zero sound card

This is the zero format of the Audio Injector stereo sound card. Great for your own projects which need a small form factor, or require you to use your own connectors. It works with the Pi2, Pi3 and Pi zero and any others with the same drivers and GPIO header. IT supplies audio in, out, a headphone amp. and is electret microphone ready. (see below for specs)

Homepage. Kickstarter page. Available at the Audio Injector Shop

Audio Injector stereo sound card

Audio injector raspberry pi stereo sound card

High resolution sound card which derives power directly from the GPIO header - with the following features :

  • Stereo RCA input
  • Stereo RCA output 2.3 V RMS outputs
  • Headphone jack and preamp for 30 mW @ 32 Ohms and 50 mW @ 16 Ohms
  • Inbuilt microphone on the board, for voice commands or other tasks.
  • Volume knobs for "real world" volume control as well as software mixer
  • As low as 0.54 ms latency in or out (that is 540 microseconds)
  • Bypass function to allow analog straight through from input to output.
  • Standard Raspberry Pi GPIO header which allows other add ons and hats to be stacked on top of the sound card
  • Small sized PCB, able to fit in boxes which are the size of the Raspberry Pi
  • Crystal locked for low jitter operation
  • Driver available with the stock Raspbian linux kernel, add the line "dtoverlay=audioinjector-wm8731-audio" to /boot/config.txt to get it running. Also available on github in the kernel sources.

Homepage. Kickstarter page.

Available at the Audio Injector Shop, Amazon US, Amazon UK (Europe) and globally through eBay

Audio Injector Octo sound card

Audio injector raspberry pi Octo sound card, RCA breakouts
Audio injector raspberry pi Octo sound card, customisable headers
Audio injector raspberry pi Octo sound card, balanced breakouts, including the card, preamp and powered input/output boards

High resolution sound card which derives power directly from the GPIO header - with the following features :

  • 8 channel output (differential)
  • 6 channel input (differential)
  • Standard Raspberry Pi GPIO header which allows other add ons and hats to be stacked on top of the sound card
  • Small sized PCB, able to fit in boxes which are the size of the Raspberry Pi
  • Customisable differential breakout headers.
  • Chip oscillator locked for low jitter operation
  • Driver available with the stock Raspbian linux kernel

Available at the Audio Injector Shop. Homepage.

dresden elektronik

RaspBee

The RaspBee is an expansion board which brings ZigBee connectivity to the Raspberry Pi. The shield allows direct communication with ZigBee PRO devices like Philips Hue, XBee Series 2 and others.

Key Features:

  • powered by Atmels ATmega256RFR2 (8-Bit AVR, 256 kB Flash, integrated RF transceiver)
  • 500m signal range (power amplified)
  • preflashed ZigBee firmware
  • also supports custom firmware via bootloader
  • extensive software package available

AB Electronics UK

1-Wire Pi Zero

1 Wire Pi Zero

The 1 Wire Pi Zero is a communication board tailored to support the 1-Wire® protocol. This board is specifically designed for use with the Raspberry Pi Zero and other compatible single-board computers. Additionally, the board is equipped with a 5V buffered I2C port.

The 1-Wire® port on the 1 Wire Pi Zero operates using the DS2482-100 I2C to 1-Wire® bridge device. This facilitates bi-directional protocol conversion between the I2C port on the Raspberry Pi and any connected 1-Wire® devices. To ensure the safety of both the 1 Wire Pi Zero and the Raspberry Pi, an ESD Protection Diode is included to guard against electrostatic spikes that may occur on the 1-Wire® port.

Users have the flexibility to establish connections to the 1-Wire® port through either the RJ-12 socket or the solder points on the PCB.

For more details visit https://www.abelectronics.co.uk/p/76/1-wire-pi-zero

1-Wire Pi Plus

1 Wire Pi Plus

The 1 Wire Pi Plus, developed by AB Electronics UK, is a communication board specifically designed to support the 1-Wire® protocol. It is intended for use with the Raspberry Pi and other compatible single-board computers. Additionally, the board features a 5V buffered I2C port.

At the core of the 1-Wire Pi Plus is the DS2482-100 I2C to 1-Wire® bridge device, which enables seamless bidirectional protocol conversion between the Raspberry Pi's I2C port and any connected 1-Wire® devices. For added protection, an ESD Protection Diode safeguards both the 1 Wire Pi Plus and the Raspberry Pi from potential electrostatic spikes that may occur on the 1-Wire® port.

To connect to the 1-Wire® port, users have the option of using either the RJ-12 socket or the solder points on the PCB.

For more details visit https://www.abelectronics.co.uk/p/60/1-wire-pi-plus

ADC Pi - Analogue to Digital converter

ADC Pi

The ADC Pi is an 8-channel 17-bit analog-to-digital converter, specifically designed to be compatible with the Raspberry Pi and other single-board computers with similar compatibility. This converter is built upon two Microchip MCP3424 A/D converters, each featuring 4 analog inputs. The MCP3424 employs a delta-sigma A/D conversion technique, characterized by low noise differential inputs. The input voltage range supported by the ADC Pi spans from 0 to 5.06V.

To allow for flexibility in addressing, the ADC Pi offers selectable I2C address bits through onboard jumpers. With the MCP3424 supporting up to 8 different I2C addresses, it becomes possible to stack up to 4 ADC Pi boards on a single Raspberry Pi, providing access to 32 ADC inputs in total.

For analog to digital conversions, the data rate can be chosen among 3.75 samples per second for 18-bit resolution, 15 samples per second for 16-bit resolution, 60 samples per second for 14-bit resolution, or 240 samples per second for 12-bit resolution. Configuration of data rate and resolution can be easily managed through the I2C interface using suitable software settings.

For more details visit https://www.abelectronics.co.uk/p/69/adc-pi

ADC Differential Pi - 18 bit Analogue to Digital converter

ADC Differential Pi

The ADC Differential Pi is an 8-channel 18-bit analog-to-digital converter specifically designed to be compatible with the Raspberry Pi and other single-board computers with similar compatibility. It utilizes two Microchip MCP3424 A/D converters, each equipped with 4 analog inputs.

The MCP3424 uses a delta-sigma A/D conversion method with low noise differential inputs, allowing for precise measurement of a differential voltage range spanning ±2.048V. To further enhance flexibility, a programmable Gain Amplifier is included, providing selectable gain options of x1, x2, x4, or x8 before the analog to digital conversion process.

The device allows for various data rates for analog to digital conversions, such as 3.75 samples per second for 18-bit resolution, 15 samples per second for 16-bit resolution, 60 samples per second for 14-bit resolution, or 240 samples per second for 12-bit resolution. These data rate and resolution configurations can be easily adjusted through the I2C interface by utilizing the appropriate software settings.

For more details visit https://www.abelectronics.co.uk/p/65/adc-differential-pi

ADC DAC Pi Zero - 12 bit 2 channel ADC and DAC

ADC DAC Pi Zero

The ADC DAC Pi Zero is a compact and versatile board, featuring both a 2-channel 12-bit analog-to-digital converter (ADC) and a 2-channel 12-bit digital-to-analog converter (DAC). Its primary purpose is to seamlessly integrate with the Raspberry Pi and other compatible single-board computers. The board is designed to match the footprint of the Raspberry Pi Zero and is also fully compatible with full-size Raspberry Pi models.

At its core, the ADC DAC Pi Zero relies on the Microchip MCP3202 A/D converter, providing 2 analog inputs with a 12-bit resolution. Additionally, it incorporates the Microchip MCP4822 dual-channel 12-bit DAC, equipped with an internal voltage reference.

To facilitate communication with the Raspberry Pi, both the analog-to-digital and digital-to-analog converters utilize the SPI interface. This ensures smooth and efficient data transfer between the ADC DAC Pi Zero and the Raspberry Pi.

For more details visit https://www.abelectronics.co.uk/p/74/adc-dac-pi-zero

Breakout Pi Plus - Prototyping board

Breakout Pi Plus

The Breakout Pi Plus is an essential and flexible prototyping expansion board, specially designed for use with the Raspberry Pi and other compatible single-board computers.

The board allows easy access to all of the Raspberry Pi GPIO pins, with the exception of GPIO 24, ID_SC, and ID_SD. These GPIO pins are broken out into individual pads, while 3.3-volt, 5-volt, and ground rails run conveniently across the main prototyping area of the board.

The prototyping area features pads arranged in groups of pins, offering a dedicated working space for various projects. Additionally, there is a separate area with individual pins, further enhancing the board's versatility for various types of experimentation and development.

For more details visit https://www.abelectronics.co.uk/p/59/breakout-pi-plus

Breakout Pi Zero - Prototyping board

Breakout Pi Zero

The Breakout Pi Zero is an invaluable and adaptable prototyping expansion board tailored for the Raspberry Pi Zero and other compatible single-board computers.

With the Breakout Pi Zero, users can easily access all Raspberry Pi GPIO pins, except for GPIO 24, ID_SC, and ID_SD, as they are thoughtfully broken out into individual pads. Along the sides of the prototyping area on the board, convenient 3.3-volt, 5-volt, and ground rails are available for quick and straightforward power connections.

The board features a practical working area with pads thoughtfully arranged into groups of three pins, providing an organized and efficient space for various project implementations and experiments.

For more details visit https://www.abelectronics.co.uk/p/68/breakout-pi-zero

Expander Pi - Digital and Analogue Expansion

Expander Pi

The Expander Pi is a highly versatile digital and analog expansion board, meticulously crafted to be compatible with the Raspberry Pi and other single-board computers with similar capabilities. Its functionality empowers users to seamlessly connect an array of devices, such as switches, lights, sensors, and more, facilitating communication with the external world.

This expansion board securely fits into the GPIO port of your Raspberry Pi, and for added stability, an optional mounting kit can be used. Power is conveniently sourced through the host Raspberry Pi, either via the GPIO port or the onboard power connector. Moreover, extended pins on the GPIO connector enable you to stack the Expander Pi along with other expansion boards, expanding your project possibilities.

The Expander Pi significantly enhances your Raspberry Pi's capabilities by offering 8 analog inputs, 2 analog outputs, and 16 digital inputs or outputs. Additionally, it comes equipped with an onboard Real-Time Clock (RTC), ensuring that your Raspberry Pi always maintains accurate date and time information.

For more details visit https://www.abelectronics.co.uk/p/50/expander-pi

I2C Switch - 4 channel I2C switch

I2C switch

The I2C Switch offered by AB Electronics UK is a 4-channel bidirectional I2C switch, controllable via the I2C bus. Its design caters to all models of Raspberry Pi and other compatible single-board computers equipped with the 40-pin GPIO connector.

This efficient I2C Switch operates on a PCA9546A controller from NXP, facilitating quad bi-directional communication between the Raspberry Pi's I2C port and any connected I2C devices. With individual channel control, each channel can be enabled or disabled independently, allowing seamless connection of I2C devices that share the same address to your Raspberry Pi.

Powered conveniently through the host Raspberry Pi's GPIO port, the I2C Switch also supports extended pins on the GPIO connector, enabling you to stack it alongside other expansion boards, enhancing the overall capabilities and versatility of your setup.

For more details visit https://www.abelectronics.co.uk/p/84/i2c-switch

IO Pi Plus 32 Channel Port Expander

IO Pi Plus

The IO Pi Plus is a 32-channel digital expansion board designed for the Raspberry Pi and other compatible single-board computers. The heart of the board lies in the Microchip Technology Inc.'s MCP23017 16-bit I/O expander. On this board, two MCP23017 expanders are incorporated, enabling seamless connection of up to 32 digital channels to the Raspberry Pi.

Powered through the host Raspberry Pi's GPIO port, the IO Pi Plus features extended pins on the GPIO connector, facilitating smooth stacking of the IO Pi Plus alongside other expansion boards, expanding your project possibilities.

Moreover, the IO Pi Plus provides flexibility in I2C addressing, thanks to the onboard solder jumpers, which enable users to select the desired I2C address bits. With the MCP23017 supporting up to 8 different I2C addresses, you can stack up to 4 IO Pi boards on a single Raspberry Pi by utilizing two MCP23017 devices on each IO Pi, ultimately providing access to a maximum of 128 I/O ports.

For more details visit https://www.abelectronics.co.uk/p/54/io-pi-plus

IO Zero 32 - 32 Channel Port Expander

IO Zero 32

The IO Zero 32 is a 32-channel digital expansion board designed for seamless integration with the Raspberry Pi and other compatible single-board computers. The board is built around the NXP PCA9535 16-bit I/O expander, with a pair of PCA9535 expanders included, allowing you to effortlessly connect up to 32 digital inputs or outputs to your Raspberry Pi.

To ensure convenient power supply, the IO Zero 32 draws power through the host Raspberry Pi's GPIO port. Furthermore, the board features extended pins on the GPIO connector, enabling you to easily stack the IO Zero 32 alongside other expansion boards, expanding your project possibilities and capabilities.

The IO Zero 32 offers flexibility in I2C addressing, thanks to the onboard solder jumpers. With the PCA9535 supporting up to 8 different I2C addresses, you can stack up to 4 IO Zero 32 boards on a single Raspberry Pi by utilizing two PCA9535 devices on each IO Zero 32, resulting in a maximum of 128 I/O ports at your disposal.

For more details visit https://www.abelectronics.co.uk/p/86/io-zero-32

RS485 Pi - RS485 serial interface

RS485 Pi

The RS485 Pi is a communication board supporting the RS-485 serial protocol, designed to work with the Raspberry Pi and other compatible single-board computers.

The RS-485 port is connected to the UART port on the Raspberry Pi using an SN65HVD72 interface. The SN65HVD72 IC converts the 3.3V UART signals to RS-485 voltages allowing communication with RS-485 compatible devices over a DB9 serial cable or twisted pair cable. The RS-485 port can be accessed through the DB9 port or the solder points on the PCB.

The RS485 Pi contains protection against voltage spikes in the form of a TVS Diode and two 10-Ω, Pulse-Proof Thick-Film Resistors.

For more details visit https://www.abelectronics.co.uk/p/77/rs485-pi

RTC Pi Real time Clock Module

RTC Pi

The RTC Pi is a battery-backed real-time clock module specially designed for the Raspberry Pi and other compatible single-board computers. Even when the Raspberry Pi is switched off, this module continues to keep track of the time, allowing the device to retrieve the current date and time from the RTC Pi when it is powered on again.

To ensure a seamless and reliable power supply, the RTC Pi draws power through the host Raspberry Pi's GPIO port. Additionally, the extended pins on the GPIO connector enable easy stacking of the RTC Pi alongside other expansion boards, enhancing the overall capabilities of the setup.

The RTC Pi relies on the DS1307 RTC real-time clock and a CR2032 battery to maintain accurate date and time information, stepping in whenever the main system power is unavailable. This battery backup functionality ensures that the RTC Pi continues to function effectively, even during power interruptions.

For more details visit https://www.abelectronics.co.uk/p/70/rtc-pi

Serial Pi Plus - RS232 serial interface

Serial Pi Plus

The Serial Pi Plus is a versatile communication board tailored to support the RS232 serial protocol specifically for the Raspberry Pi and other compatible single-board computers.

The RS232 port on this board is integrated with the UART port of the Raspberry Pi through either a MAX3232 or ICL3232ECBNZ interface. By employing these ICs, the 3.3V UART signals are efficiently converted to RS232 voltages, enabling smooth communication with RS232 compatible devices via a DB9 serial cable. Moreover, when equipped with a null-modem cable, the board opens up terminal access to Linux on the Raspberry Pi, facilitating effortless interaction with a terminal application. For added convenience, the RS232 port can be accessed through either the DB9 port or the solder points on the PCB.

The PCB design also incorporates an array of 2.54mm pitch holes, featuring 3.3V and 5V connections. This allows you to create and integrate supplementary circuits directly onto the board, empowering you with even greater possibilities for customization and expansion.

For more details visit https://www.abelectronics.co.uk/p/51/serial-pi-plus

Serial Pi Zero - RS232 serial interface

Serial Pi Zero

The Serial Pi Zero is a versatile communication board designed to support the RS232 serial protocol, specifically tailored for seamless integration with the Raspberry Pi Zero and other compatible single-board computers.

The RS232 port on this board is connected to the Raspberry Pi's UART port using either a MAX3232 or ICL3232ECBNZ interface. Thanks to these ICs, the Serial Pi Zero effectively converts the 3.3V UART signals to RS232 voltages, facilitating smooth communication with RS232 compatible devices via a DB9 serial cable. Additionally, when paired with a null-modem cable, the board offers terminal access to Linux on the Raspberry Pi through a terminal application, streamlining your interactions.

For more details visit https://www.abelectronics.co.uk/p/75/serial-pi-zero

Servo PWM Pi Zero - PWM servo controller

Servo PWM Pi Zero

The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller designed to seamlessly integrate with the Raspberry Pi and other compatible single-board computers. This board is perfect for efficiently driving LEDs and radio control servos, catering to a wide range of applications.

At the heart of the Servo PWM Pi lies the PCA9685 PWM I2C LED controller IC from NXT. With the ability to control each of the 16 outputs using a 12-bit (4096 steps) duty cycle, you can precisely adjust the output from 0% to 100%, ensuring smooth and accurate control over your connected devices.

Flexibility is a key feature of this board, as it allows you to program the output frequency to your desired range, spanning from a typical 40Hz to 1000Hz. Moreover, each output driver can be individually configured as either an open-drain setup with a 22 mA current sink capability at 5 V or a totem pole configuration with a 22 mA sink and 10 mA source capability at 5 V. This adaptability enables you to tailor the board's performance to your specific needs.

For added convenience and safety, 220R current limiting resistors are incorporated on each channel. This allows you to directly connect servos or LEDs to the outputs without worry, making the Servo PWM Pi a reliable and user-friendly solution for your PWM control needs.

For more details visit https://www.abelectronics.co.uk/p/72/servo-pwm-pi

Advamation

AdvaBoard RPi1

The AdvaBoard RPi1 is a multifunctional extension-board, which contains:

  • TFT-display-interface (3.2" 320x240, 5" 800x480, 7" 800x480)
  • touchscreen interface
  • real-time-clock (RTC)
  • CPLD + a microcontroller
  • all I/Os are 5V-tolerant, except I2C
  • analog-I/Os (4* 16bit inputs, 2* 8bit outputs)
  • separate connectors for all interfaces (I2C, SPI, digital/analog-I/O, RS-232, RS-485 incl. pluggable terminator)
  • power-management: battery-backed RPC/I2C-interfaces, power-down, power-up on time or event, separately powered peripherals
  • JTAG-programmer for Xilinx CPLDs/FPGAs, C2-programmer for SiLabs C8051F*
  • Software (C + Python 2.6/3.x libraries, free example programs)

Details can be found at www.advamation.com/products/embeddedpc/advaboard.html.

More boards (e.g. additional displays, I/Os, motors, sensors etc.), which can be connected to the Raspberry Pi and/or the AdvaBoard RPi1 will also be available soon.

Pi Supply - Pi Cocktails

The following add on boards will shortly be available from Pi Supply and are based on the Pi Cocktail series of boards explored in The MagPi magazine. More details to follow soon.

MyPiShop

Pi 8 LED & 8 Button

Pi 8 LED & 8 Button interface board for Raspberry Pi.

Perfect way to learn how to use the GPIO pins.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
Has eight bright green LED's and eight momentary switches.
For a more detailed description see: http://mypishop.com/Pi%208%20LED%20&%208%20Button.html

Stepper Motor Controller Board

Pi Stepper Motor Controller interface board for Raspberry Pi.

The stepper board uses 8 GPIO pins to drive up to two stepper motors.
(One stepper motor is included in the kit)
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
The board can use the 5 VDC provided by the Raspberry Pi or you can optionally provide your own source voltage to drive the motors.
This board includes a ULN2803 8 Channel Darlington Driver and can be used to control other higher current devices such as relay boards, etc.
For a more detailed description see: http://mypishop.com/Stepper.html

Read Your Pi !(LCD Interface Board)

Read Your Pi (LCD) interface board for Raspberry Pi.

Available kits with 20x4 LCD display or 16x2 LCD display. The interface board uses the GPIO pins display characters on a LCD display.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
For a more detailed description see: http://mypishop.com/Read%20Your%20Pi%20!.html

Protect Your Pi ! (16 or 32 IO Expansion Kit)

Protect Your Pi (LCD) interface board for Raspberry Pi.

Available kits with 16 or 32 GPIO expansion pins. The expansion board uses the I2C bus on the Raspberry Pi to provide up to 32 additional GPIO pins.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
For a more detailed description see: http://mypishop.com

Pi MATRIX ! 8X8 LED Matrix with 16 bit I/O !

Pi MATRIX ! 8X8 LED Matrix with 16 bit I/O kit for the Raspberry Pi.

HUGE 8X8 LED MATRIX
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
Take the display off and use it for 16 bits of I/O
For a more detailed description see: http://mypishop.com

Mikronauts

Pi Droid Alpha Educational Robot Controller

Pi Droid Alpha Educational Robot Controller

Pi Droid Alpha Educational Robot Controller Raspberry Pi expansion board from Mikronauts

Pi Droid Alpha adds:

- eight FlexIO Servo/PWM/IO headers

- sixteen digital input/outputs

- eight analog inputs

- a dual h-bridge motor driver

to Raspberry Pi.

RoboPi Advanced Robot Controller

RoboPi Advanced Robot Controller

RoboPi Advanced Robot Controller Raspberry Pi expansion board from Mikronauts

RoboPi adds:

- eight-core 32-bit microcontroller running at 100Mhz

- 24x FlexIO Servo/PWM/io

- 8x 12 bit analog inputs

- easy to use C and Python RoboPi API

to the Raspberry Pi in order to off-load hard real time I/O and allow more precise timing than Linux running on the Pi allows.

Pi Rtc Dio Gold Real Time Clock + Digital I/O expander

Pi Rtc Dio expansion board for the Raspberry Pi

Mikronauts Pi Rtc Dio Real Time Clock & I/O Expansion Board

Pi Rtc Dio Gold adds:

- Real Time Clock

- 3v3 power supply

- 32 bits digital I/O

- prototyping area

Pi Rtc Dio stacks on top of the Raspberry Pi and was designed by Mikronauts to make building one-off expansion circuits easier for everyone. Pi Rtc Dio also has a four pin I2C expansion header, and a five pin COM connector for future expansion.

Pi Rtc Dio Silver Digital I/O expander

Pi Jumper Breakout Board

Mikronauts Pi Rtc Dio Real Time Clock & I/O Expansion Board that stacks on top of the Raspberry Pi and was designed by Mikronauts to add 32 digital I/O's and 3.3v power supply making one-off expansion circuits easier for everyone. Pi Rtc Dio also has a four pin I2C expansion header, and a five pin COM connector for future expansion.

Pi Jumper & Pi Jumper Plus Breakout with 3v3 and 5v I2C

Pi Jumper is the ultimate Raspberry Pi breakout board from Mikronauts

Pi Jumper adds:

- clearly labelled breakout of the 26 pin GPIO connector

- 3v3 power supply for your breadboard circuits

- 3v3 I2C expansion connector

- 5v I2C expansion connector

Pi Jumper Plus provides an IDC jumper cable instead of the stacking header so that you can plug Pi Jumper Plus right into a solderless breadboard.

SchoolBoard ][ develpoment board with LED's & Switches

SchoolBoard 2 Development Board shown with Pi Jumper and Raspberry Pi

SchoolBoard [ 8xLED's, 8xDipSw, 8xPushButton, large solderless bread board for education from Mikronauts

SchoolBoard ][ adds:

- 8x LED's with current limiting resistors

- 8x slide switches with current limiting resistors

- 8x tactile push buttons with current limiting resistors

SchoolBoard ][ was designed to work with any single board computer or other development board.

EZasPi prototyping board, stacks on TOP of Pi rev.1/2

EZasPi Prototyping board for the Raspberry Pi

EZasPi prototyping board for rev.1 or rev.2 Raspberry Pi, with stacking header and mounting hardware

EZasPi adds:

- Raspberry Pi GPIO 26 connector labeled on both sides

- 3v3 4 pin I2C expansion connector

- 3v3 5 pin TTL level serial port connection

- extra large prototyping area

- mounting holes compatible with rev.2 Model A & Model B

- works with 26 & 40 pin Raspberry Pi, Banana Pi, Odroid C1, MIPS CI20 and more

EZasPi (B) prototyping board, stacks on UNDER Pi rev.2

EZasPi (B) prototyping board for the rev.2 Raspberry Pi, with stacking header and mounting hardware

Both boards are silk screened to indicate signal busing, are designed to accommodate screw terminals, and have an I2C expansion header footprint. EZasPi also has a COM expansion header footprint.

Nexlab.net

OssoPI (Relay and digital inputs)

OssoPI

OssoPI is an expansion board featuring 8x 277V @ 10A relays + 8x digital (opto or non-opto isolated) inputs on standard dimensions for 9 unit DIN rail enclosure

Rasky (KVM over IP)

Rasky

Rasky is an expansion board for raspberry pi model 2B to use the rpi as a KVM over IP. It features VGA video acquisition, 2 250VAC 10A relays, 2 digital opto-isolated digital inputs, keyboard, mouse and remote storage emulation over USB, power management using 4 Ni-MH rechargeable AA batteries to assure rpi clean shutdown in case of power loss/failure.

It is actually in crowdfunding, but production will go on no matter how the campaign will end, the price anyway will change depending on the campaign success. Estimated delivery for the first batch is Q2 2016, it will be available both as a kit and ready to use. All developement, both for hw and sw, is completely open source.

SafePI

SafePI

SafePI is an fully open hardware expansion board for raspberry pi model 1B+, 2, 3 providing power supply protection and safe shutdown by using 4 common available AA rechargeable Ni-MH batteries.

Features

  • It notify the Raspberry when primary power is absent on a configurable GpIO (pin 36 or 38) and then give enough time to shutdown from the batteries.
  • When the RPi is on and the primary power is connected, it recharge the batteries.
  • It provide safe voltage regulator giving the ability to power the RPi from 7V to 25V.
  • Battery drain when switched off if minimal (less than 10mA/h)
  • optionally stackable with other expansion boards (need the right pin header mounted!)
  • It uses 4x commonly available (and low cost) AA Ni-MH batteries
  • Very long life battery duration: they are used only when the primary power fail
  • Open Source design (GPL licensed)

Sources and schematics available from SafePI gitlab repository

electronics.cat

3Bpi - Three Branch Pi

set05_08 aka 3Bpi translates bidirectionally inputs/outputs of the Raspberry Pi's GPIO from 3.3V to 5V TTL levels. It has three external ports to connect electronics.cat open source hardware boards. This board takes advantage of P5's Raspberry Pi, with access to a second I2C channel (I2C_0, it can be used without camera connected) and CTS and RTS for hardware flow control in serial communications. Two of 3Bpi's ports, P3 and P4, can be used as 8 bit input/output or I2C and/or SPI ports. One port, P2, is thought for serial communications and Raspberry Pi can be set as master or slave setting the jumpers properly.

Relays Board

set05_02 is a 4 relays board to be connected to 3Bpi. It can be expanded to another 4 relays board or an input board

Input Board

set05_02 is a 4 inputs board to be connected to 3Bpi. It can be expanded to another 4 inputs board or a 4 relays board

LEDs + microswitch

set01_04 is a universal 8 bit inputs (microswitch) / outputs (LEDs) to be connected to 3Bpi. Each bit is set as input or output through jumpers position.

Digital Input / Output I2C expander

set03_03 expands 16 inputs/outputs using TWI (I2C) to be connected to 3Bpi. Each board has two PCF8574. The lower bit is forced to a low level hardware (chip 1 A0 = 0 and chip 2 A0 = 1). Addresses A1 and A2 are set through SMD microswitch (SW1). The jumpers can notify if there is any change when reading, avoiding a constant reading of I2C bus. P1 and P2 connectors are designed to be connected in daisy chain up to four set03_03 boards (64 inputs / outputs).

RS232 to TTL converter

set01_03 translates RS232 signals to TTL to be connected to P2's 3Bpi serial communication port.

USB - RS232 TTL / I2C translator

set01_05 has three functions : 1st) translating USB to TTL Tx and Rx to be connected to 3Bpi, 2nd) converting USB to I2C and 3rd) supplying voltage to next board (it is not for 3Bpi) if jumper is between positions 1 and 2.

uC Atmega

set01_01 is a microcontroller board with two 8-bit ports of inputs/outputs and one serial communication port. It is useful when it is needed to implement some real time application. It can be connected to 3Bpi using any port. Usually through serial communication port.

MSL Digital Soulutions

RemotePi Board

The RemotePi Board is an intelligent infrared remote controlled power switch add-on board for the Raspberry Pi2, B, B+, A+. It allows to switch power on and off using any button (configurable in learning mode) of an existing standard IR remote. Power is only cut after notifying the OS and giving it time to shut-down. It is mainly intended to remote control (using LIRC) and power off/on a mediacenter system. i.e OpenELEC, Raspbmc, XBian, RasPlex, Raspbian. The board is compatible to simple GPIO IR receiver and piggy backs onto the Raspberry Pi, no soldering required. For more information click here.

USB Hub Zero

The USB Hub Zero is a USB hub designed for the Raspberry Pi Zero. Having the same footprint, it is mounted under the Pi Zero and can be powered from the Pi Zero.

DTronixs

You can get these boards at tindie.com in the DTronixs store

MiniPiio L293D

MiniPiio L293D is a small (50x40mm) add-on board which provides a dual H-Bridge DC-Motor circuit using the venerable L293D chip.

MiniPiio Relay2

MiniPiio Relay2 is a small (50x40mm) add-on board which provides a two 1A DPCO Relays. Each relay has a set of screw terminals for easy wiring.

MiniPiio DIO16

MiniPiio DIO16 is a small (50x40mm) add-on board which provides an additional 16-channels of Digital Input/Outputs for the RPi. It can use either a MCP23S17 (SPI) or MCP23017 (I2C) Port Expander.

MiniPiio RS232

MiniPiio RS232 is a small (50x40mm) add-on board which provides a basic RS232 to TTL interface for the RPi. It uses a 3.3V MAX3232 to provide the RS232 interface.

MiniPiio ULN2803

MiniPiio ULN2803 is a small(50x40mm) add-on board which connects a ULN2803 Darlington Driver chip to the RPi's GPIO allowing the RPi to control electronic circuits which require more current to drive them.

RPi MIDI Breakout Board

RPi MIDI Breakout Board is a simple MIDI breakout board for the Raspberry Pi using the hardware UART from the RPi's expansion interface.

RPi Protoboard SM

RPi Protoboard SM is a simple prototype board for the Raspberry Pi. Here is another link to the same project.

RPi "UserPort"

RPi UserPort is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC.

mindsensors.com

Mindsensors-logo.jpg

PiStorms

PiStorms board from mindsensors.com fits over the GPIO pins of Raspberry Pi, and it can control LEGO Mindstorms motors and sensors. This board has integrated touch screen LCD with browser to start/stop your programs. Users can program it in Python or Scratch.


OpenElectrons.com

Oe-logo-print.png

PiServoController

PiServoController board from OpenElectrons.com fits over the GPIO pins of Raspberry Pi, and it can control upto 6 servos from Raspberry Pi. It has i2c interface to control i2c devices. This board provides power stabilization for Raspberry Pi, so that any power fluctuations won't cause RPi to reset. It also provides signal buffering so that you can connect higher voltage servos to the board. For Servo control, it uses Open Source Software, ServoBlaster. Users can program the servo control in Python.


PiPan

PiPan is a Pan/Tilt Kit for PiCamera designed by OpenElectrons.com. Pi-Pan provides Pan and tilt movements for your Raspberry Pi Camera, using two servos for X and Y axis movements. The kit includes servos, mounting hardware and PiServoController board to control servo movements. Users can program the servo control/camera movements, etc. in Python. There also is a light that can be fitted in front of the PiCamera to illuminate subjects, PiLight.


PiConsole

PiConsole is a Bluetooth Console adapter designed by OpenElectrons.com. You can use this to access the console of your Pi on a smartphone or tablet, making it very convenient to use RPi outddoors. There are two models, using Bluetooth 2.1 technology and Bluetooth 4.0 (BLE) technology. They also come in the form of a kit, which includes a pass-through header, in case you want to attach other devices on the GPIO header.


Pi&Bash>_

Pi&Bash>_ Multifunction GPIO Boards for Raspberry Pi

Pi&Bash>_ The One-Stop Raspberry Pi Add-On Board

The Pi&Bash>_ is a new add-on board for the brilliant Raspberry Pi single board computer, designed for anyone who wants to get their Raspberry Pi to interact with the outside world. There are already many add-on boards available, but this one is different, since it offers far more flexibility to the user. Most add-on boards will let the user learn some new programming skills by introducing a new function, such as digital I/Os, or a display, or some analogue inputs, but the Pi&Bash>_ gives the users all this and more on a single compact board.

The beauty of having all these functions on the one board, means that the user is not limited by the constraints of the add-on board, and when they are ready to take the next step and use a new function, they can do so without delay. This is a very powerful motivation for anyone learning to program, as the functions of the board continually inspire the learner.

The Pi&Bash>_ comes with the following functions/interfaces:

  • Traffic Light LEDs
  • 5 Push Button Switches
  • Liquid Crystal Display (LCD) with 2 lines of 16 characters
  • Software switchable LCD backlight
  • Thermometer
  • 8 configurable digital inputs/outputs (I/Os)
  • 8 analogue inputs
  • Header for connecting additional I2C devices
  • Can be powered from external 5V supply


Pi-Plates.com

3D-ppLogoSmall.gif Stackable expansion boards that allow you to control the world with a Raspberry Pi.

DAQCplate

DAQCplate from Pi-Plates

The Pi-Plates DAQC (DAC-SEE) adds a rich set of input/output options to your Raspberry Pi. It includes 7 powerful digital outputs for driving external devices such as relays and high current LEDs as well as 8 analog to digital inputs for measuring temperature, voltage, humidity and more. In addition there are eight digital inputs, two analog outputs, and seven general purpose indicator LEDs. Other features include:

  • Dedicated onboard processor
  • Provides real time data collection
  • Allows for future code updates
  • Only needs two dedicated RPI pins (GPIO 25 and CE1)1
  • All features accessible via rich Python command set
  • Compatible with all versions of Raspberry Pi
  • Design allows up to eight DAQCplates to be stacked together for eight times the I/O
  • Uses less than 20mA of DC current during standby
  • Conforms to ROHS, FCC Part 15 Class A, and CE standards
  • All inputs and outputs ESD and overvoltage protected
  • Protects your Raspberry Pi while providing enhanced I/O
  • Includes programmable bi-color LED
  • Additional 14-pin header included if B+ signals are required
  • Capable of reading up to seven HC-SR04 distance sensors
  • Each DAQCplate is 100% tested and verified
  • Detailed Online Users Guide with Examples

For detailed specifications, go to https://pi-plates.com/product/daqcplate/

MOTORplate

MOTORplate from Pi-Plates

The Pi-Plates MOTORplate is the most powerful motor controller you can buy for your Raspberry Pi. It has the capability of driving two stepper motors using four step sizes including microstepping. Or, it can control four DC motors with 10 bit resolution. Additional headers allow dedicated power control to each motor controller. There are four 16-bit tachometers for DC speed control and the ability to use acceleration on all motors to prevent stalls and maximize torque. Four protected general purpose inputs can be be attached to end stop, limit, optical, or hall effect sensors. Other features include:

  • Dedicated onboard processor
  • Allows for future code updates
  • Only needs two dedicated RPI pins (GPIO 25 and CE1)
  • All features accessible via rich Python command set
  • Compatible with all versions of Raspberry Pi
  • Design allows up to eight MOTORplates to be stacked together for eight times the motor drive
  • Compatible with all other Pi-Plates.
  • Uses less than 20mA of DC current during standby
  • Conforms to ROHS, FCC Part 15 Class A, and CE standards
  • All inputs and outputs ESD and overvoltage protected
  • Protects your Raspberry Pi while providing enhanced smart motor control
  • Includes programmable LED
  • Additional 14-pin header included if B+ signals are required
  • Each MOTORplate is 100% tested and verified
  • Detailed Online Users Guide with Examples

For detailed specifications, go to https://pi-plates.com/product/motorplate/

RELAYplate

RELAYplate from Pi-Plates

The Pi-Plates RELAYplate is the safest relay controller available for the Raspberry Pi. It has the capability of driving 7 individual relays each UL rated to switch 120VAC or 30VDC at 1 amp. This Pi-Plate has been specifically designed to protect the user and the user's hardware from any single point failure. Other features include:

  • Dedicated onboard processor
  • Allows for future code updates
  • Only needs two dedicated RPI pins (GPIO 25 and CE1)
  • All features accessible via rich Python command set
  • Compatible with all versions of Raspberry Pi
  • Design allows up to eight RELAYplates to be stacked together for a total of 56 relays
  • LED annunciators provide visual status of each relay.
  • Seven screwless terminal blocks provide additional safety and convenience.
  • Compatible with all other Pi-Plates.
  • Uses less than 20mA of DC current during standby
  • Conforms to ROHS, FCC Part 15 Class A, and CE standards
  • Design to conform to the stringent safety standards of UL 60950
  • Protects your Raspberry Pi while providing enhanced relay control
  • Includes programmable LED
  • Additional 14-pin header included if B+ signals are required
  • Each RELAYplate is 100% tested and verified
  • Detailed Online Users Guide with Examples

For detailed specifications, go to https://pi-plates.com/product/relayplate/

PROTOplate

PROTOplate from Pi-Plates

The Pi-Plates PROTOplate provides an inexpensive and convenient way to add personalized and custom hardware to your Pi-Plates based project. Key features include:

  • A low cost yet versatile solution for adding custom hardware to a Pi-Plate based design
  • Mechanically and electrically compatible with all Pi-Plate boards
  • Mates with all three revisions of the Raspberry Pi including version A, B, B+, and R2
  • Multiple boards can be stacked to provide addition area for components
  • Comes preassembled – no soldering required
  • Additional 14-pin header included if B+ and R2 signals are required

For detailed specifications, go to https://pi-plates.com/product/proto/


Pridopia

Pridopia Rs-pi serials for Raspberry Pi

Rs-Pi 4 USB hub & multi-function I2C AD/DA RTC RS232 board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 4 Ports USB hub with multi-function I2C board

size 71mm x 54mm small than Raspberry Pi (RTC-DS1307, Temperature Sensor-TMP102, D/A MCP4725,A/D ADS1015,EEPROM, MCP23008, FT232RL, ZT3243) Rs-Pi-USB-hub-I2C-multi-function AD/DA Board with USB to RS232 full DB9 9pin signal or USB to TTL (FT232RL) console port), RTC with CR1220 battrey, USB with 1.6A PTC fuse for all four USB ports. No extra extension cable need. and no extra Power adapter for USB hub. All from Pridopia All of our Rs-Pi Products are design and Made in UK

We have four different models with different function, you can choose anyone you want.

All of our Rs-Pi Products are design and Made in UK

Rs-Pi 4 USB hub with I2C 23017x2 32 GPIO board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 4 Ports USB hub with I2C 23017x2 32 GPIO board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-4-USB-hub-I2C-23017x2 Board All from Pridopia All of our Rs-Pi Products are design and Made in UK

Rs-Pi 4 USB hub with SPI 23s17x2 32 GPIO board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 4 Ports USB hub with SPI 23s17x2 32 GPIO board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-4-USB-hub-SPI-23s17x2 Board All from Pridopia

Rs-Pi 7 USB hub with multi-function I2C AD/DA board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 7 Ports USB hub with multi-function I2C board

size 71mm x 54mm small than Raspberry Pi (RTC-DS1307, Temperature Sensor-TMP102, D/A MCP4725,A/D ADS1015,EEPROM) Rs-Pi-7-USB-hub-I2C-multi-function AD/DA Board RTC with CR2032 battrey, USB with 2 x 1.6A PTC fuse for all seven USB ports. No extra extension cable need. and no extra Power adapter for USB hub. All from Pridopia

We have two different models with different function, you can choose anyone you want.

Rs-Pi 7 USB hub with I2C 23017x1 16 GPIO board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 7 Ports USB hub with I2C 23017 16 GPIO board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-7-USB-hub-I2C-23017 Board All from Pridopia

Rs-Pi 7 USB hub with SPI 23s17x1 16 GPIO board

Pridopia P-pi serials for Raspberry Pi

  • The Rs-Pi Internal 7 Ports USB hub with SPI 23S17 16 GPIO board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-7-USB-hub-SPI-23S17 Board All from Pridopia

Rs-Pi I2C 23017 x2 (or SPI 23s17 x2) 32 GPIO with uln2803 x2 board

Pridopia P-pi serials for Raspberry Pi

  • 1. The Rs-Pi I2C 23017x2 32 GPIO with 8 Switch input & uln2803x2 output board

each 23017 port A output to ULN2803, first one 23017 port B for 8 switch input, second one 23017 port B for normal output with 8 LED. with 3.5mm block terminal 9pin output, can plug in our 2803 relay board with two Step motor connector (5V,D0,D1,D2,D3) (5V,D4,D5,D6,D7) can use Step motor (28BYJ-48 5VDC) with 4 5V motor output port size 71mm x 54mm small than Raspberry Pi Rs-Pi-I2C-23017x2-2803x2 Board

  • 2. The Rs-Pi SPI 23s17x2 32 GPIO with 8 Switch input & uln2803x2 output board

each 23s17 port A output to ULN2803, first one 23s17 port B for 8 switch input, second one 23s17 port B for normal output with 8 LED. with 3.5mm block terminal 9pin output, can plug in our 2803 relay board with two Step motor connector (5V,D0,D1,D2,D3) (5V,D4,D5,D6,D7) can use Step motor (28BYJ-48 5VDC) with 4 5V motor output port size 71mm x 54mm small than Raspberry Pi Rs-Pi-SPI-23s17x2-2803x2 Board All from Pridopia

Rs-Pi I2C 23017 -2 or SPI 23s17 -2 - 32 GPIO Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi I2c 23017 x2 32GPIO board I2C interface

size 49mm x 49mm with 32 Blue SMD LED Rs-Pi-23017-2 -pi serials for Raspberry Pi

  • 2. Rs-Pi SPI 23s17 x2 32GPIO Board SPI Interface

size 49mm x 49mm with 32 Blue SMD LED Rs-Pi-23S17-2

Rs-Pi I2C 23017 -4 or SPI 23s17 -4 - 64 GPIO Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi I2c 23017 x4 64 GPIO board I2C interface

size 71mm x 54mm small than Raspberry Pi with 64 Blue SMD LED Rs-Pi-23017-4

  • 2. Rs-Pi SPI 23s17 x4 64 GPIO Board SPI Interface

size 71mm x 54mm small than Raspberry Pi with 64 Blue SMD LED Rs-Pi-23S17-4

Rs-Pi I2C 23017 -8 or SPI 23s17 -8 - 128 GPIO Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi I2c 23017 x8 128GPIO board I2C interface

size 71mm x 54mm small than Raspberry Pi Rs-Pi-23017-8

  • 2. Rs-Pi SPI 23s17 x8 128GPIO Board SPI Interface

size 71mm x 54mm small than Raspberry Pi Rs-Pi-23S17-8

Rs-Pi I2C 32 Channel PWM /Servo Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi I2c 32 channel PWM / Servo board I2C interface

size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-2

Rs-Pi I2C 16 Channel PWM /Servo & I2C 23017 (or SPI 23s17) 16 GPIO Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi I2c 32 channel PWM / Servo board & I2C 23017-1 16 GPIO + uln2803 for Port A

size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-23017

  • 2. Rs-Pi I2c 32 channel PWM / Servo board & SPI 23S17-1 16 GPIO + uln2803 for Port A

size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-23s17

Rs-Pi I2C 24x16 LED Matrix Board

Pridopia P-pi serials for Raspberry Pi Rs-Pi I2c 24x16 LED Matrix Board size 71mm x 54mm small than Raspberry Pi Rs-Pi-24x16 LED Matrix

Rs-Pi I2C 16x16 LED Matrix Board

Pridopia P-pi serials for Raspberry Pi Rs-Pi I2c 24x16 LED Matrix Board size 71mm x 54mm small than Raspberry Pi Rs-Pi-16x16 LED Matrix

Rs-Pi ULN2803 & SPI AD/DA & I2C 1-Wire - special for rs-pi v2-p5

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi ULN2803 & SPI AD/DA with 1-Wire (V2-P5 support) Board

ULN2803 8 Darlington transistor array output can output to 8 5V relay with 2 Step motor connector,can connect Step motor(28BYJ-48 5VDC) and MCP3002 SPI Interface 10 bit Analog-to-Digital Converter and MCP4802 SPI Interface 8 bit Digital-to-Analog Converter size 49mm x 39mm Rs-Pi-2803-1-Wire

Rs-Pi ULN2803 8bit 2 Relay Board + 2 Step Motor Port

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi ULN2803 2 Relay Board + 2 Step Motor Port

ULN2803 8 Darlington transistor array output size 55mm x 40mm Rs-Pi-2803-2Relay-StepMotor

Rs-Pi ULN2803 & SPI AD/DA Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi ULN2803 & SPI AD/DA Board

ULN2803 8 Darlington transistor array output can output to 8 5V relay with 2 Step motor connector,can connect Step motor(28BYJ-48 5VDC) and MCP3002 SPI Interface 10 bit Analog-to-Digital Converter and MCP4802 SPI Interface 8 bit Digital-to-Analog Converter size 49mm x 39mm Rs-Pi-2803-ADDA

Rs-Pi ULN2803 8bit 2 Relay , 4 Relay, 8 Relay Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi ULN2803 2 Relay Board

ULN2803 8 Darlington transistor array output size 49mm x 40mm Rs-Pi-2803-2Relay

  • 2. Rs-Pi ULN2803 4 Relay Board

ULN2803 8 Darlington transistor array output size 76mm x 36mm Rs-Pi-2803-4Relay

  • 3. Rs-Pi ULN2803 8 Relay Board

ULN2803 8 Darlington transistor array output size 76mm x 76mm Rs-Pi-2803-8Relay

Rs-Pi L293D-3 6 Motor Board support Rs-pi V2-P5

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi L293D-3 6 Motor Board support Rs-Pi- V2 P5

size 55mm x 56mm Rs-Pi-L293D-3 Motor Board All of our Rs-Pi Products are design and Made in UK

Rs-Pi L293D-2 4 Motor Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi L293D-2 4 Motor Board

size 55mm x 56mm Rs-Pi-L293D-2 Motor Board

Rs-Pi 8GPIO Switch & I2C 23017 (or SPI 23s17) 16 GPIO Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi 8GPIO Switch & I2C 23017-1 16 GPIO + uln2803 for Port A

size 71mm x 54mm small than Raspberry Pi Rs-Pi-23017-8-Switch

  • 2. Rs-Pi 8GPIO Switch & SPI 23S17-1 16 GPIO + uln2803 for Port A

size 71mm x 54mm small than Raspberry Pi Rs-Pi-23s17-8-Switch

Rs-Pi 4 USB hub & 7 USB hub with 1-Wire Board

Pridopia P-pi serials for Raspberry Pi

  • 1. Rs-Pi 4 USB hub & multi function & 1-Wire Board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-4hub-1Wire

  • 2. Rs-Pi 7 USB hub & multi function & 1-Wire Board

size 71mm x 54mm small than Raspberry Pi Rs-Pi-7hub-1Wire

Rs-Pi 2482-100 & 2482-800 1-Wire 9 channel Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi 2482-800 & 2482-100 9 Channel 1-Wire Board

DS2482-800 8 channel with 8 ESD diode & DS2482-100 with 1 ESD diode 1 channel 1-Wire board with AM2302 sockt & DS18B20 socket size 71mm x 54mm Rs-Pi-9Channel-1-Wire

Rs-Pi i2c 18 bit 32 channel A/D Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi i2c 18bit 32 Channel A/D Board

i2c 18bit 32 channel A/D board size 71mm x 54mm Rs-Pi-32Channel-A/D

Rs-Pi i2c 18 bit 16 channel A/D Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi i2c 18bit 16 Channel A/D Board

i2c 18bit 16 channel A/D board size 71mm x 54mm Rs-Pi-16Channel-A/D Board

Rs-Pi USB to TTL console Board

Pridopia P-pi serials for Raspberry Pi

  • Rs-Pi USB to TTL Console Board

USB to TTL Console module plug in Rs-Pi with normal USb to Mini USb cable with your PC or Mac size 32mm x 39mm Rs-Pi-USB-TTL Console Board

Rs-Pi RS232 DB9 cable

Pridopia P-pi serials for Raspberry Pi

Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor w/ DC Power supply

Pridopia P-pi serials for Raspberry Pi

Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor

Pridopia P-pi serials for Raspberry Pi

Rs-Pi LCD Master Board

Pridopia P-pi serials for Raspberry Pi

Rs-Pi i2c LCD Master Board

Pridopia P-pi serials for Raspberry Pi

Rs-Pi Power Bank Board

Pridopia P-pi serials for Raspberry Pi

New Scratch software support our full range products Scratch interface

All of our Rs-Pi Products are design and Made in UK All can plug in our RS-Pi USB hub multi-function Board and work together.

Sfera Labs

Sfera Labs

http://www.sferalabs.cc

Strato Pi Mini Board

Strato Pi Mini Board mounted on RPi3

Features:

  • 9-28Vdc power supply, with surge and reverse polarity protection
  • real time clock with on-board lithium back-up battery
  • on-board buzzer, connected to an I/O pin of the Raspberry Pi board, for acoustic feedback
  • on-board LEDs for power supply activity
  • power supply on a screw terminal block

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/strato-pi


Strato Pi Base Board

Strato Pi Base Board mounted on RPi3

Features:

  • 9-28Vdc power supply, with surge and reverse polarity protection
  • real time clock with on-board lithium back-up battery
  • on-board buzzer, connected to an I/O pin of the Raspberry Pi board, for acoustic feedback
  • standard RS-232 and RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection
  • power supply and serial connections on a screw terminal block
  • on-board LEDs for power supply and serial line activity
  • hardware watchdog implemented in the Strato Pi board, fully independent from the Raspberry Pi, controlled via the I/O pins of the Raspberry Pi board

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/strato-pi


Strato Pi UPS Board

Strato Pi UPS Board mounted on RPi3

Features:

  • 9-28Vdc power supply, with surge and reverse polarity protection
  • real time clock with on-board lithium back-up battery
  • on-board buzzer, connected to an I/O pin of the Raspberry Pi board, for acoustic feedback
  • standard RS-232 and RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection
  • power supply and serial connections on a screw terminal block
  • on-board LEDs for power supply and serial line activity
  • hardware watchdog implemented in the Strato Pi board, fully independent from the Raspberry Pi, controlled via the I/O pins of the Raspberry Pi board
  • integrated uninterruptible power supply, using external lead-acid 12V battery
  • 1.1A resettable fuse on battery input
  • auxiliary power supply output voltage, to power external devices with the Strato Pi UPS
  • simple UPS status and control via the I/O pins of the Raspberry Pi board
  • on-board LED for battery operations status

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/strato-pi


Strato Pi CAN Board

Strato Pi CAN Board mounted on RPi3

Features:

  • 9-65Vdc power supply, with surge and reverse polarity protection
  • Controller Area Network (CAN) V2.0B interface, supports speeds up to 1Mb/s, with opto-isolator and electrostatic discharge protection
  • standard RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection
  • up to 2.5A max current to the 5V Raspberry Pi power supply input pins (at 24 Vdc)
  • real time clock with on-board lithium back-up battery
  • relay with change-over (CO), Single Pole Double Throw (SPDT) terminals
  • on-board buzzer, connected to an I/O pin of the Raspberry Pi board, for acoustic feedback
  • on-board LEDs for power supply, RS-485 and CAN bus activity
  • power supply and serial connections on a screw terminal block
  • hardware watchdog implemented in the Strato Pi board, fully independent from the Raspberry Pi, controlled via the I/O pins of the Raspberry Pi board

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/strato-pi


Strato Pi Server

Strato Pi Server is a module comprising of a Raspberry Pi 3 Model B and a Strato Pi board (Base, UPS or CAN) enclosed in a standard 4 modules DIN-rail case.

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/strato-pi


Strato Pi CM

Strato Pi CM is an industrial computer based on the Raspberry Pi Compute Module, in a compact 2 modules DIN rail case.

Features:

  • compatible with Raspberry Pi Compute Module 1, Raspberry Pi Compute Module 3/3+ and Raspberry Pi Compute Module 3/3+ Lite
  • 9-28Vdc power supply, with surge and reverse polarity protection, and 1.1A resettable fuse
  • up to 3.1A max current to the 5V Raspberry Pi Compute Module power supply input pins (at 24Vdc)
  • real time clock with replaceable CR1025 Lithium/Manganese Dioxide back-up battery
  • standard RS-485 interface to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection
  • 10/100 Ethernet port
  • two USB2.0 type-A ports
  • hardware watchdog implemented in the Strato Pi CM microcontroller, fully independent from the Raspberry Pi Compute Module, controlled via the GPIO pins of the Raspberry Pi board and acting on the Raspberry Pi Compute Module hardware reset line
  • front-panel LEDs for power supply, serial line activity, and one GPIO-controlled LED
  • recessed push-button, hidden behind the front-panel, connected to a GPIO pin
  • power supply and serial connections on a pluggable terminal block
  • hidden service microUSB port with Micro-AB receptacle (to flash the Raspberry Pi Compute Module eMMC), can be accessed opening the case
  • hidden microSD slot to install the external flash memory of the Raspberry Pi Compute Module 3 Lite, can be accessed opening the case
  • packaged in a compact 2 modules DIN rail case

Complies with CE directives for EMC, Electrical Safety, Emission and RoHS.

For more details: http://www.sferalabs.cc/strato-pi-cm



Strato Pi CM Duo

Strato Pi CM Duo is an industrial computer based on the Raspberry Pi Compute Module, in a compact 2 modules DIN rail case, featuring dual SD card with high-speed switching matrix.

  • compatible with Raspberry Pi Compute Module 1, Raspberry Pi Compute Module 3/3+ and Raspberry Pi Compute Module 3/3+ Lite
  • 9-28Vdc power supply, with surge and reverse polarity protection, and 1.1A resettable fuse up to 3.1A max current to the 5V Raspberry Pi Compute Module power supply input pins (at 24Vdc)
  • real time clock with replaceable CR1025 Lithium/Manganese Dioxide back-up battery
  • standard RS-485 interface to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection
  • 10/100 Ethernet port
  • two power-controlled USB2.0 type-A ports
  • two hidden microSD slots routed to a high-speed matrix for switching between primary (boot) and secondary bus
  • hardware watchdog implemented in the Strato Pi CM microcontroller, fully independent from the Raspberry Pi Compute Module, controlled via GPIO pins and acting on the Raspberry Pi Compute Module hardware reset line
  • configurable boot SD swap on watchdog reset and power cycle, and hot swap of secondary SD card
  • embedded Microchip ATECC608A secure element chip
  • front-panel LEDs for power supply, serial line activity, and one GPIO-controlled LED
  • recessed push-button, hidden behind the front-panel, connected to a GPIO pin
  • power supply and serial connections on a pluggable terminal block
  • packaged in a compact 2 modules DIN-rail case

Complies with FCC, IC and CE directives for EMC, Electrical Safety, Emission and RoHS.

For more details: http://www.sferalabs.cc/strato-pi-cm


Iono Pi Board

Iono Pi Board mounted on RPi3

Features:

  • 9-28Vdc power supply, with surge and reverse polarity protection, and 1.1A resettable fuse
  • up to 2.5A max current to the 5V Raspberry Pi power supply input pins (at 24Vdc)
  • 4 power relay outputs rated for 6A at 250V
  • 2 analog voltage inputs 0÷30V
  • 2 analog voltage inputs 0÷3V on internal pin-headers
  • 7 configurable digital input/output pins
  • 1-Wire and Wiegand support
  • optional real time clock with on-board lithium back-up battery
  • 2 on-board LEDs, one for power supply and one controlled by a Pi’s GPIO line
  • power supply and I/O connections on a screw terminal block

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/iono-pi


Iono Pi

Iono Pi is a module comprising of a Raspberry Pi 3 Model B and a Iono Pi Board enclosed in a standard 4 modules DIN-rail case.

CE/FCC/ICES/CISPR/RoHS Compliant

For more details: http://www.sferalabs.cc/iono-pi


Sheepwalk Electronics

SWE LOGO.png

RPI1 Passive 1-Wire Module

SWE RPI1.jpg

The RPI1 is a very simple board to allow easy use of the kernel/GPIO based 1-Wire Master on your Raspberry Pi. It is available assembled or as a kit of parts.

RPI2 Single Channel I2C to 1-Wire Master

SWE RPI2.jpg

The RPI2 is a DS2482-100 based I2C to 1-Wire Master. Fully supported by OWFS it allows you to access the full range of 1-Wire devices on your Raspberry Pi.

RPI3 Eight Channel I2C to 1-Wire Master

SWE RPI3.jpg

The RPI3 is a DS2482-800 based eight channel I2C to 1-Wire Master. Fully supported by OWFS it allows you to access the full range of 1-Wire devices on your Raspberry Pi. Having 8 separate 1-Wire channels it allows you to build a large 1-Wire network. It also optionally features a DS1307 I2C Real Time Clock IC ensuring accurate timing for your 1-Wire data even after a reboot.

Cabin Tech Global, LLC

Ctg logo2.jpg

Guzunty Programmable I/O Expansion Board

The Guzunty adds open source programmable hardware to the Raspberry Pi at an amazingly low price. The design contains a 72 macrocell programmable logic device, so the board functions like a 'virtual breadboard'.

Guzunty photo.jpg


This board is ideal for those with many different projects in mind, because it is so flexible. It can be a simple IO expander, a 7 segment LED driver, provide servo and regular PWM outputs, or anything you can dream up that will fit into 1600 logic gates. The device is '5 volt tolerant' and so can be used to safely interface 5v logic devices (such as Arduino) to the 3.3v Raspberry Pi. The GitHub community site contains many ready made cores that you can download and use directly. You can design your own custom cores using industry standard languages such as VHDL or Verilog.

Axiris

AbioWire+

AbioWire+ is a 1-Wire adapter providing seventeen 1-Wire channels with ESD protection, three 1-Wire controller chips, and a real-time clock (RTC).

AbioCard model A

AbioCard model A expansion board featuring a real-time clock (RTC), 8 bidirectional I/O lines, 8 12-bit ADC inputs, 16 PWM outputs at 97 kHz with 8-bit resolution.

AbioCard model B

AbioCard model B expansion board featuring a real-time clock (RTC), 8 bidirectional I/O lines, 8 12-bit ADC inputs, 16 PWM outputs at 40-1000 Hz with 12-bit resolution.

AbioRTC

AbioRTC is an inexpensive real-time clock (RTC) expansion board.

Dexter Industries

GrovePi

GrovePi is an Arduino based expansion board which adds support for Grove analog, digital, serial and I2C sensors.

Lintest Systems

Lintest-logo.png

http://lintestsystems.com

PiCapture SD1

PiCapture is a unique video capture solution that enables all of the video processing capability of the Raspberry Pi Graphics Processing Unit (GPU). PiCapture SD1 captures standard-definition interlaced video in the CVBS standard (NTSC/PAL) from Composite, S-Video, and YPbPr Component sources as 640×480 video. By using the Raspberry Pi CSI-2 camera interface and providing complete camera emulation, all of the video encoding and management capabilities of the Raspberry Pi are usable with any compatible video source. In addition, applications that require large amounts of Raspberry Pi resources (e.g. real-time image processing) are now enabled since USB capture devices are not required.

References