AGL7.0 Home screen NOT displayed
Is the penguin and AGL logo displayed on the monitor during startup?
Thank you very much for your reply.
No, there is nothing displayed on the monitor during startup and even after Linux login prompt is shown on serial console which is running on other PC. The monitor says that no signal input.
Hi OK, please paste the result of the "printenv" command.
Here is the results of printenv command.
baudrate=115200 bootargs=console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait rootdelay=2 bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000 bootdelay=3 fdt_high=0xffffffffffffffff filesize=12a7200 initrd_high=0xffffffffffffffff load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb load_ker=ext4load mmc 0:1 0x48080000 /boot/Image stderr=serial stdin=serial stdout=serial ver=U-Boot 2015.04 (Apr 08 2019 - 09:51:12) Environment size: 547/131068 bytes
> load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb
This device tree is for the H3 v1.1 SK(RTP0RC7795SKBX0010SA00).
> [ 0.005726] NOTICE: BL2: PRR is R-Car H3 Ver.2.0
According to the above log you are using H3 v2.0 SK.
Please use the "r8a7795-h3ulcb.dtb".
Now the home screen is successfully displayed! Thank you so much for your support.