https://elinux.org/api.php?action=feedcontributions&user=Jerry&feedformat=atom
eLinux.org - User contributions [en]
2024-03-29T10:23:33Z
User contributions
MediaWiki 1.31.0
https://elinux.org/index.php?title=Jetson/L4T/r35.5.x_patches&diff=581527
Jetson/L4T/r35.5.x patches
2024-03-08T06:15:22Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[gstreamer] memory leak in nv3dsink<br />
https://forums.developer.nvidia.com/t/gstreamer-nv3dsink-memory-gstcaps-leaks/283056/19<br />
<br />
'''Security'''<br />
[EKS] please re-generate a new EKS image by flashing JP-5.1.3 with security enabled. <br />
https://forums.developer.nvidia.com/t/284400/8<br />
<br />
'''Misc'''<br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[RCE][t194][t234] JetPack-5.1.3/l4t-r35.5.0 camera firmware (rce-fw) with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/285027/8<br />
<br />
[Argus] pre-built update to enable infinite timeout property <br />
https://forums.developer.nvidia.com/t/284939/3</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.5.x_patches&diff=581512
Jetson/L4T/r35.5.x patches
2024-03-07T07:18:59Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[gstreamer] memory leak in nv3dsink<br />
https://forums.developer.nvidia.com/t/gstreamer-nv3dsink-memory-gstcaps-leaks/283056/19<br />
<br />
'''Security'''<br />
<br />
'''Misc'''<br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[RCE][t194][t234] JetPack-5.1.3/l4t-r35.5.0 camera firmware (rce-fw) with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/285027/8<br />
<br />
[Argus] pre-built update to enable infinite timeout property <br />
https://forums.developer.nvidia.com/t/284939/3</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.5.x_patches&diff=581509
Jetson/L4T/r35.5.x patches
2024-03-07T07:18:43Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[gstreamer] memory leak in nv3dsink<br />
https://forums.developer.nvidia.com/t/gstreamer-nv3dsink-memory-gstcaps-leaks/283056/19<br />
<br />
'''Security'''<br />
<br />
'''Misc'''<br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[RCE][t194][t234] JetPack-5.1.3/l4t-r35.5.1 camera firmware (rce-fw) with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/285027/8<br />
<br />
[Argus] pre-built update to enable infinite timeout property <br />
https://forums.developer.nvidia.com/t/284939/3</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.5.x_patches&diff=581506
Jetson/L4T/r35.5.x patches
2024-03-07T06:19:03Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[gstreamer] memory leak in nv3dsink<br />
https://forums.developer.nvidia.com/t/gstreamer-nv3dsink-memory-gstcaps-leaks/283056/19<br />
<br />
'''Security'''<br />
<br />
'''Misc'''<br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Argus] pre-built update to enable infinite timeout property <br />
https://forums.developer.nvidia.com/t/284939/3</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=580798
Jetson/L4T/r35.3.x patches
2024-02-05T08:00:59Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.1.1/l4t-r35.3.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/260583/5<br />
<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[VI-5][multi-cam] race condition fix for channel context is busy<br />
https://forums.developer.nvidia.com/t/258971/18<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36<br />
<br />
[Argus] pre-built update to resolve memory corruption within libnvargus.so<br />
https://forums.developer.nvidia.com/t/268519/10/<br />
<br />
[Argus] Extend timeout values to avoid socket timeout errors reported by Argus <br />
https://forums.developer.nvidia.com/t/278999/17/<br />
<br />
[Orin NX/Nano] Revise the symbol of nvcsi to stream IMX219 on CAM0 port<br />
https://forums.developer.nvidia.com/t/252259/19</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=580606
Jetson/L4T/r35.4.x patches
2024-01-12T05:51:26Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs: "mounted filesystem with ordered data mode. Opts: (null)" is due to cryptsetup has not installed.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
[Security] Tegrakeyhash reports "Invalid key format" with Ubuntu 22.04<br />
add `-traditional` options for using the traditional PKCS#1 format instead of the PKCS#8 format.<br />
https://forums.developer.nvidia.com/t/278383/7<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
<br />
[Xavier NX] Cannot enable ROOTFS_AB and ROOTFS_ENC simultaneously<br />
https://forums.developer.nvidia.com/t/273147/12 <br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/<br />
<br />
[Argus] fixes for set_mode_delay_ms and infinite timeout support<br />
https://forums.developer.nvidia.com/t/276217/10/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=580603
Jetson/L4T/r35.4.x patches
2024-01-12T05:50:41Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs: "mounted filesystem with ordered data mode. Opts: (null)" is due to cryptsetup has not installed.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
[Security] Tegrakeyhash reports "Invalid key format" with Ubuntu 22.04<br />
add `-traditional` options for using the traditional PKCS#1 format instead of the PKCS#8 format.<br />
https://forums.developer.nvidia.com/t/278383/7<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
<br />
[Xavier NX] Cannot enable ROOTFS_AB and ROOTFS_ENC simultaneously<br />
https://forums.developer.nvidia.com/t/273147/12 <br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/<br />
<br />
[Argus] fixes for set_mode_delay_ms and infinite timeout support<br />
https://forums.developer.nvidia.com/t/276217/7/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=580600
Jetson/L4T/r35.4.x patches
2024-01-12T05:47:48Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs: "mounted filesystem with ordered data mode. Opts: (null)" is due to cryptsetup has not installed.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
[Security] Tegrakeyhash reports "Invalid key format" with Ubuntu 22.04<br />
add `-traditional` options for using the traditional PKCS#1 format instead of the PKCS#8 format.<br />
https://forums.developer.nvidia.com/t/278383/7<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
<br />
[Xavier NX] Cannot enable ROOTFS_AB and ROOTFS_ENC simultaneously<br />
https://forums.developer.nvidia.com/t/273147/12 <br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=580258
Jetson/L4T/r35.4.x patches
2023-11-30T02:47:33Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs: "mounted filesystem with ordered data mode. Opts: (null)" is due to cryptsetup has not installed.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
<br />
[Xavier NX] Cannot enable ROOTFS_AB and ROOTFS_ENC simultaneously<br />
https://forums.developer.nvidia.com/t/273147/12 <br />
<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=579871
Jetson/L4T/r35.4.x patches
2023-10-30T03:19:07Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs: "mounted filesystem with ordered data mode. Opts: (null)" is due to cryptsetup has not installed.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=579868
Jetson/L4T/r35.4.x patches
2023-10-30T03:17:38Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
[Orin NX][Disk Encryption] fail to create an encrypted rootfs for image flashing.<br />
error logs `mounted filesystem with ordered data mode. Opts: (null)`.<br />
https://forums.developer.nvidia.com/t/264454/22/<br />
<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=579691
Jetson/L4T/r35.3.x patches
2023-10-16T02:59:25Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.1.1/l4t-r35.3.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/260583/5<br />
<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[VI-5][multi-cam] race condition fix for channel context is busy<br />
https://forums.developer.nvidia.com/t/258971/18<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36<br />
<br />
[Argus] pre-built update to resolve memory corruption within libnvargus.so<br />
https://forums.developer.nvidia.com/t/268519/10/<br />
<br />
[Orin NX/Nano] Revise the symbol of nvcsi to stream IMX219 on CAM0 port<br />
https://forums.developer.nvidia.com/t/252259/19</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=579682
Jetson/L4T/r35.4.x patches
2023-10-12T01:51:15Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Orin][Xavier][rce-fw] JP-5.1.2 camera firmware to update deskew algorithm, and also stability fixes<br />
https://forums.developer.nvidia.com/t/268833/5/<br />
<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=579676
Jetson/L4T/r35.4.x patches
2023-10-11T05:54:29Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
'''Boot'''<br />
<br />
'''Camera'''<br />
[Argus][multi-camera] fix memory corruption within libnvargus<br />
https://forums.developer.nvidia.com/t/268519/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.4.x_patches&diff=579010
Jetson/L4T/r35.4.x patches
2023-08-30T03:32:54Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
<br />
[gstreamer]cannot decode H264/H265 GDR stream<br />
https://forums.developer.nvidia.com/t/258939/6<br />
<br />
'''Security'''<br />
[OP-TEE][EKS] Steps to create EKS image with user-defined FV (fixed vector) key<br />
https://forums.developer.nvidia.com/t/263994/8/<br />
<br />
'''Misc'''<br />
[CAN] Entering into ERROR-PASSIVE and can't recover issue<br />
https://forums.developer.nvidia.com/t/mttcan-on-orin-nx-issues/259596/22<br />
'''Boot'''<br />
<br />
'''Camera'''</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=578881
Jetson/L4T/r32.7.x patches
2023-08-24T05:15:07Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
[32.7.1][apt install] issue in ''apt install nvidia-jetpack''<br />
https://forums.developer.nvidia.com/t/229186/17<br />
<br />
[Jetson-IO] FATAL ERROR when there're multiple APP partitions mounted<br />
https://forums.developer.nvidia.com/t/231472/13/<br />
<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9<br />
<br />
[ffmpeg] fail to install ffmpeg package<br />
https://forums.developer.nvidia.com/t/229353/8<br />
<br />
[MMAPI] NvDrmRenderer broken<br />
https://forums.developer.nvidia.com/t/221265/10<br />
<br />
[MMAPI] 07_video_convert sample result not match as expected<br />
https://forums.developer.nvidia.com/t/227623/14<br />
<br />
[gstreamer] patch for building nvdrmvideosink<br />
https://forums.developer.nvidia.com/t/231013/8<br />
<br />
'''Camera'''<br />
[VI-2][Nano] fix image sequence numbers incrementing even if no image captured<br />
https://forums.developer.nvidia.com/t/221208/7/<br />
<br />
[Argus] workaround to resolve cmake fails for libargus <br />
https://forums.developer.nvidia.com/t/260226/3/<br />
<br />
<br />
'''Security'''<br />
[TX2][odmfuseread] fixes to revise secureboot/odmfuse.func for reading target fuse info<br />
https://forums.developer.nvidia.com/t/260645/21/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=578878
Jetson/L4T/r32.7.x patches
2023-08-24T05:14:44Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
[32.7.1][apt install] issue in ''apt install nvidia-jetpack''<br />
https://forums.developer.nvidia.com/t/229186/17<br />
<br />
[Jetson-IO] FATAL ERROR when there're multiple APP partitions mounted<br />
https://forums.developer.nvidia.com/t/231472/13/<br />
<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9<br />
<br />
[ffmpeg] fail to install ffmpeg package<br />
https://forums.developer.nvidia.com/t/229353/8<br />
<br />
[MMAPI] NvDrmRenderer broken<br />
https://forums.developer.nvidia.com/t/221265/10<br />
<br />
[MMAPI] 07_video_convert sample result not match as expected<br />
https://forums.developer.nvidia.com/t/227623/14<br />
<br />
[gstreamer] patch for building nvdrmvideosink<br />
https://forums.developer.nvidia.com/t/231013/8<br />
<br />
'''Camera'''<br />
[VI-2][Nano] fix image sequence numbers incrementing even if no image captured<br />
https://forums.developer.nvidia.com/t/221208/7/<br />
<br />
[Argus] workaround to resolve cmake fails for libargus <br />
https://forums.developer.nvidia.com/t/260226/3/<br />
<br />
<br />
'''Security'''<br />
[TX2][odmfuseread] fixes to revise secureboot/odmfuse.func for reading fuse info<br />
https://forums.developer.nvidia.com/t/260645/21/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=578746
Jetson/L4T/r35.3.x patches
2023-08-08T03:30:47Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.1.1/l4t-r35.3.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/260583/5<br />
<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[VI-5][multi-cam] race condition fix for channel context is busy<br />
https://forums.developer.nvidia.com/t/258971/18<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36<br />
<br />
[Orin NX/Nano] Revise the symbol of nvcsi to stream IMX219 on CAM0 port<br />
https://forums.developer.nvidia.com/t/252259/19</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=578020
Jetson/L4T/r35.3.x patches
2023-07-21T05:54:33Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.1.1/l4t-r35.3.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/260583/5<br />
<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36<br />
<br />
[Orin NX/Nano] Revise the symbol of nvcsi to stream IMX219 on CAM0 port<br />
https://forums.developer.nvidia.com/t/252259/19</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=577996
Jetson/L4T/r32.7.x patches
2023-07-21T02:16:43Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
[32.7.1][apt install] issue in ''apt install nvidia-jetpack''<br />
https://forums.developer.nvidia.com/t/229186/17<br />
<br />
[Jetson-IO] FATAL ERROR when there're multiple APP partitions mounted<br />
https://forums.developer.nvidia.com/t/231472/13/<br />
<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9<br />
<br />
[ffmpeg] fail to install ffmpeg package<br />
https://forums.developer.nvidia.com/t/229353/8<br />
<br />
[MMAPI] NvDrmRenderer broken<br />
https://forums.developer.nvidia.com/t/221265/10<br />
<br />
[MMAPI] 07_video_convert sample result not match as expected<br />
https://forums.developer.nvidia.com/t/227623/14<br />
<br />
[gstreamer] patch for building nvdrmvideosink<br />
https://forums.developer.nvidia.com/t/231013/8<br />
<br />
'''Camera'''<br />
[VI-2][Nano] fix image sequence numbers incrementing even if no image captured<br />
https://forums.developer.nvidia.com/t/221208/7/<br />
<br />
[Argus] workaround to resolve cmake fails for libargus <br />
https://forums.developer.nvidia.com/t/260226/3/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=577972
Jetson/L4T/r35.3.x patches
2023-07-19T07:58:58Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36<br />
<br />
[Orin NX/Nano] Revise the symbol of nvcsi to stream IMX219 on CAM0 port<br />
https://forums.developer.nvidia.com/t/252259/19</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=577414
Jetson/L4T/r35.3.x patches
2023-06-26T07:59:12Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/<br />
<br />
[Argus] camera stability and error resiliency bug fixes <br />
https://forums.developer.nvidia.com/t/243051/36</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=576791
Jetson/L4T/r35.3.x patches
2023-05-23T08:00:45Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
https://forums.developer.nvidia.com/t/253748/9<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25<br />
<br />
'''Boot'''<br />
[thermal] boot failure in low temperature environment for Orin series <br />
https://forums.developer.nvidia.com/t/jetson-orin-200t-module-s-minimum-operating-temperature-is-only-20/241413/51<br />
[flash] Orin NX 8GB is using wrong dtb with p3509 usecase<br />
https://forums.developer.nvidia.com/t/orinnx-8gb-flash-support-for-customboard-in-35-3-1/251187/3<br />
<br />
'''Camera'''<br />
[VI-5] surface configuration for NV16 format support<br />
https://forums.developer.nvidia.com/t/252803/28/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.3.x_patches&diff=576616
Jetson/L4T/r35.3.x patches
2023-05-10T02:03:11Z
<p>Jerry: </p>
<hr />
<div><br />
'''Multimedia'''<br />
[gstreamer] nvcompositor-sigsegv<br />
https://forums.developer.nvidia.com/t/229494/20<br />
<br />
'''Security'''<br />
[SecureBoot] please avoid using --user_key options for JP-5 release version.<br />
https://forums.developer.nvidia.com/t/248137/48<br />
<br />
'''Misc'''<br />
[USB] nvidia-agx-orin-usb-connection-issues<br />
https://forums.developer.nvidia.com/t/245341/28<br />
<br />
[SPI] spi-tpm-module-support-fail-on-jetpack-5-0-2-5-1-on-jetson-xavier-agx<br />
https://forums.developer.nvidia.com/t/241096/25</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.2.x_patches&diff=575106
Jetson/L4T/r35.2.x patches
2023-03-28T07:23:18Z
<p>Jerry: </p>
<hr />
<div>'''Camera'''<br />
[r35.2.1][Jetson-IO] Configure Jetson AGX CSI Connector <br />
https://forums.developer.nvidia.com/t/241893/<br />
<br />
[CPHY] Kernel patch to configure CPHY mode by device tree instead of hardcode values.<br />
https://forums.developer.nvidia.com/t/241898/<br />
<br />
'''flash'''<br />
[flash] Massflash failed in Jetpack 5.1<br />
https://forums.developer.nvidia.com/t/xavier-nx-jetpack-5-1-initrd-massflash-doesnt-work/242078/6<br />
<br />
[Xavier NX SD] watchdog disabled issue<br />
https://forums.developer.nvidia.com/t/jetpack-5-1-kernel-panic-does-not-lead-to-reboot-with-a-b-system/245215/18<br />
<br />
'''Security'''<br />
[Secureboot][UEFI][AGX Xavier] fixes to enable secureboot from UEFI on r35.2.1 release version.<br />
https://forums.developer.nvidia.com/t/244505/4<br />
<br />
'''Misc'''<br />
[PWM][Orin NX] modify firewall config to enable read/write permission for controlling PWM7.<br />
https://forums.developer.nvidia.com/t/247231/3</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.2.x_patches&diff=574326
Jetson/L4T/r35.2.x patches
2023-03-07T14:16:10Z
<p>Jerry: </p>
<hr />
<div>'''Camera'''<br />
[r35.2.1][Jetson-IO] Configure Jetson AGX CSI Connector <br />
https://forums.developer.nvidia.com/t/241893/<br />
<br />
[CPHY] Kernel patch to configure CPHY mode by device tree instead of hardcode values.<br />
https://forums.developer.nvidia.com/t/241898/<br />
<br />
'''flash'''<br />
[flash] Massflash failed in Jetpack 5.1<br />
https://forums.developer.nvidia.com/t/xavier-nx-jetpack-5-1-initrd-massflash-doesnt-work/242078/6<br />
<br />
'''Security'''<br />
[Secureboot][UEFI][AGX Xavier] fixes to enable secureboot from UEFI on r35.2.1 release version.<br />
https://forums.developer.nvidia.com/t/244505/4</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.2.x_patches&diff=572676
Jetson/L4T/r35.2.x patches
2023-02-14T05:37:39Z
<p>Jerry: </p>
<hr />
<div>'''Camera'''<br />
<br><br />
[r35.2.1][Jetson-IO] Configure Jetson AGX CSI Connector <br />
https://forums.developer.nvidia.com/t/241893/<br />
<br />
[CPHY] Kernel patch to configure cphy mode by device tree instead of hardcode values.<br />
https://forums.developer.nvidia.com/t/241898/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T&diff=572361
Jetson/L4T
2023-02-07T05:57:24Z
<p>Jerry: </p>
<hr />
<div>== L4T ==<br />
L4T (NVIDIA Jetson Linux) provides the Linux kernel, bootloader, NVIDIA drivers, flashing utilities, sample filesystem, and more for the Jetson platform.<br />
<br />
See the [https://docs.nvidia.com/jetson/l4t/index.html L4T Developer Guide] online documentation and the Jetson Developer Site [https://developer.nvidia.com/embedded/linux-tegra L4T page] for more information.<br />
<br />
=== L4T Patches ===<br />
See these release-specific wiki pages for links L4T patches. Patches are given for some bugs to be fixed in following releases.<br />
<br />
[r35]<br />
* [[Jetson/L4T/r35.2.x_patches ]]<br />
* [[Jetson/L4T/r35.1.x_patches ]]<br />
<br />
[r32]<br />
* [[Jetson/L4T/r32.7.x_patches ]]<br />
* [[Jetson/L4T/r32.6.x_patches ]]<br />
* [[Jetson/L4T/r32.5.x_patches ]]<br />
* [[Jetson/L4T/r32.4.x_patches ]]<br />
* [[Jetson/L4T/r32.3.x_patches ]]<br />
* [[Jetson/L4T/r32.2.x_patches ]]<br />
* [[Jetson/L4T/r32.1_patches ]]<br />
<br />
[r28]<br />
* [[Jetson/L4T/r28.2.1_patches ]]</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T&diff=572356
Jetson/L4T
2023-02-07T05:57:12Z
<p>Jerry: </p>
<hr />
<div>== L4T ==<br />
L4T (NVIDIA Jetson Linux) provides the Linux kernel, bootloader, NVIDIA drivers, flashing utilities, sample filesystem, and more for the Jetson platform.<br />
<br />
See the [https://docs.nvidia.com/jetson/l4t/index.html L4T Developer Guide] online documentation and the Jetson Developer Site [https://developer.nvidia.com/embedded/linux-tegra L4T page] for more information.<br />
<br />
=== L4T Patches ===<br />
See these release-specific wiki pages for links L4T patches. Patches are given for some bugs to be fixed in following releases.<br />
<br />
[r35]<br />
* [[Jetson/L4T/r35.1.x_patches ]]<br />
* [[Jetson/L4T/r35.2.x_patches ]]<br />
<br />
[r32]<br />
* [[Jetson/L4T/r32.7.x_patches ]]<br />
* [[Jetson/L4T/r32.6.x_patches ]]<br />
* [[Jetson/L4T/r32.5.x_patches ]]<br />
* [[Jetson/L4T/r32.4.x_patches ]]<br />
* [[Jetson/L4T/r32.3.x_patches ]]<br />
* [[Jetson/L4T/r32.2.x_patches ]]<br />
* [[Jetson/L4T/r32.1_patches ]]<br />
<br />
[r28]<br />
* [[Jetson/L4T/r28.2.1_patches ]]</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.2.x_patches&diff=572351
Jetson/L4T/r35.2.x patches
2023-02-07T05:56:59Z
<p>Jerry: Created page with "'''Camera''' <br> [r35.2.1][Jetson-IO] Configure Jetson AGX CSI Connector https://forums.developer.nvidia.com/t/241893"</p>
<hr />
<div>'''Camera'''<br />
<br><br />
[r35.2.1][Jetson-IO] Configure Jetson AGX CSI Connector <br />
https://forums.developer.nvidia.com/t/241893</div>
Jerry
https://elinux.org/index.php?title=Jetson/l4t/Camera_BringUp&diff=571591
Jetson/l4t/Camera BringUp
2023-01-13T01:54:56Z
<p>Jerry: </p>
<hr />
<div>== Get Prepared == <br />
* Please read through "Camera Development" section in https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/camera_sensor_prog.html#<br />
== FAQ == <br />
=== Tips for debugging ===<br />
* Boost the clock for debug.<br />
sudo su<br />
echo 1 > /sys/kernel/debug/bpmp/debug/clk/vi/mrq_rate_locked<br />
echo 1 > /sys/kernel/debug/bpmp/debug/clk/isp/mrq_rate_locked<br />
echo 1 > /sys/kernel/debug/bpmp/debug/clk/nvcsi/mrq_rate_locked<br />
cat /sys/kernel/debug/bpmp/debug/clk/vi/max_rate |tee /sys/kernel/debug/bpmp/debug/clk/vi/rate<br />
cat /sys/kernel/debug/bpmp/debug/clk/isp/max_rate | tee /sys/kernel/debug/bpmp/debug/clk/isp/rate<br />
cat /sys/kernel/debug/bpmp/debug/clk/nvcsi/max_rate | tee /sys/kernel/debug/bpmp/debug/clk/nvcsi/rate<br />
<br />
<br />
'''TX1'''<br />
* if you saw below error message<br />
tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11<br />
<br />
* please check below 4 items in your sensor device tree, these should follow the settings in your sensor datasheet<br />
mode0 {<br />
cil_settletime = "0";<br />
active_w = "1920";<br />
active_h = "1080";<br />
embedded_metadata_height = "1";<br />
<br />
* if you saw below error message<br />
video4linux video0: MW_ACK_DONE syncpoint time out!<br />
<br />
* Enable the csi debug message from below command, and use v4l2-ctl to verify the driver first.<br />
sudo su<br />
cd /sys/kernel/debug/dynamic_debug/<br />
echo file csi2_fops.c +p > control<br />
<br />
v4l2-ctl -d /dev/video0 --set-ctrl bypass_mode=0 --stream-mmap --stream-count=3<br />
<br />
* please check below<br />
please review the configuration of "line_length" in sensor driver<br />
try to increase the delay between video lines data send via CSI<br />
review the sensor datasheet to check the settings of FPS range<br />
<br />
<br />
<br />
<br />
'''TX2'''<br />
* if you saw below message it could be the sensor output embedded data line but DT didn't declare embedded_metadata_height or it value is 0<br />
arm-smmu 12000000.iommu: Unhandled context fault: iova=0x00000000, fsynr=0x200011, cb=19, sid=4(0x4 - VI), pgd=0, pud=0, pmd=0, pte=0<br />
<br />
<br /><br />
<br />
=== Steps to enable more debug messages ===<br />
* To enable logs from user-space for more details<br />
sudo su<br />
kill the process of argus_daemon/nvargus-daemon or nvcamera-daemon <br />
export enableCamPclLogs=5<br />
export enableCamScfLogs=5<br />
/usr/sbin/argus_daemon(nvargus-daemon) option for argus<br />
/usr/sbin/nvcamera-daemon option for gst-launch<br />
<br />
launch camera from another console<br />
<br />
* To enable trace for more information<br />
echo 1 > /sys/kernel/debug/tracing/tracing_on<br />
echo 30720 > /sys/kernel/debug/tracing/buffer_size_kb<br />
echo 1 > /sys/kernel/debug/tracing/events/tegra_rtcpu/enable<br />
echo 1 > /sys/kernel/debug/tracing/events/freertos/enable<br />
echo 2 > /sys/kernel/debug/camrtc/log-level<br />
echo 1 > /sys/kernel/debug/tracing/events/camera_common/enable<br />
echo > /sys/kernel/debug/tracing/trace<br />
cat /sys/kernel/debug/tracing/trace<br />
<br />
VI error decoder map from trace<br />
CSIMUX_FRAME data bit field<br />
bit 0:2 STREAM_ID<br />
bit 3 VPR<br />
bit 4 FS_flag<br />
bit 5 FE_flag<br />
bit 6 FE_CSI_FAULT<br />
bit 7 FS_FAULT<br />
bit 8 FORCE_FE_FAULT<br />
bit 9 FE_FRAME_ID_FAULT<br />
bit 10 PXL_ENABLE_FAULT<br />
bit 20:25 '''CSI_FAULT_CODE'''<br />
'''CSI_FAULT_CODE''' data bit field<br />
bit 20 PP FSM timeout<br />
bit 21 PH single bit error repaired<br />
bit 22 CRC error on payload<br />
bit 23 Line short error<br />
<br />
The bit 22 CRC error on payload. It could be CRC error at frame end package. Please contact with sensor vendor to check the CRC header.<br />
kworker/0:1-2059 [000] ...1 434.733650: rtcpu_vinotify_handle_msg: tstamp:13948014423 tag:CSIMUX_FRAME channel:0x00 frame:2 vi_tstamp:1063112012 data:0x00<big>4</big>00060<br />
<br />
The bit 5 and 7 indicate lose the FE package cause the FS_FAULT<br />
kworker/4:0-30 [004] ...1 241.772651: rtcpu_vinotify_handle_msg: tstamp:7868711648 tag:CSIMUX_FRAME channel:0x00 frame:1 vi_tstamp:3573743671 data:0x000000a0 <br />
<br />
The CSIMUX_FRAME bit 21 PH single bit error repaired. Possible the sensor didn't send the ECC package.<br />
kworker/4:0-2238 [004] ...1 543.467972: rtcpu_vinotify_handle_msg: tstamp:17333540584 tag:CSIMUX_FRAME channel:0x00 frame:0 vi_tstamp:153670980 data:0x00200060<br />
Can try disable the ECC check by modify the REG INTR_STATUS/ERR_INTR_MASK/ERROR_STATUS2VI_MASK to try it<br />
<br />
CHANSEL_FAULT data bit field<br />
bit 16:31 LINE_NUMBER<br />
bit 15 DTYPE_MISMATCH<br />
bit 14 EMBED_INFRINGE<br />
bit 13 EMBED_LONG_LINE<br />
bit 12 EMBED_SPURIOUS<br />
bit 11 EMBED_RUNAWAY<br />
bit 10 EMBED_MISSING_LE<br />
bit 9 PIXEL_SHORT_LINE<br />
bit 8 PIXEL_LONG_LINE<br />
bit 7 PIXEL_SPURIOUS<br />
bit 6 PIXEL_RUNAWAY<br />
bit 5 PIXEL_MISSING_LE<br />
bit 4 PIXEL_LINE_TIMER<br />
bit 3 EMBED_EOF<br />
bit 2 EMBED_SOF<br />
bit 1 PIXEL_EOF<br />
bit 0 PIXEL_SOF<br />
<br />
The trace show the 0x0ada0040 0x40 means CHANSEL_FAULT of PIXEL_RUNAWAY means VI receives more lines than expected. The 0xad9(2778) is the lines report from the sensor driver.<br />
kworker/5:2-275 [005] ...1 122.290528: rtcpu_vinotify_handle_msg: tstamp:4155862787 tag:CHANSEL_PXL_SOF channel:0x00 frame:0 vi_tstamp:4155862337 data:0x00000001<br />
kworker/5:2-275 [005] ...1 122.290531: rtcpu_vinotify_handle_msg: tstamp:4155867990 tag:CHANSEL_LOAD_FRAMED channel:0x01 frame:0 vi_tstamp:4155867544 data:0x08000000<br />
kworker/5:2-275 [005] ...1 122.342572: rtcpu_vinotify_handle_msg: tstamp:4156521216 tag:CHANSEL_PXL_EOF channel:0x00 frame:0 vi_tstamp:4156520630 data:0x0ad90002<br />
kworker/5:2-275 [005] ...1 122.342579: rtcpu_vinotify_handle_msg: tstamp:4156521395 tag:CHANSEL_FAULT channel:0x00 frame:0 vi_tstamp:4156520667 data:0x0ada0040<br />
kworker/5:2-275 [005] ...1 122.342582: rtcpu_vinotify_handle_msg: tstamp:4156522342 tag:CHANSEL_LOAD_FRAMED channel:0x01 frame:0 vi_tstamp:4156521558 data:0x08000000<br />
kworker/5:2-275 [005] ...1 122.342585: rtcpu_vinotify_handle_msg: tstamp:4156522509 tag:CHANSEL_FAULT_FE channel:0x01 frame:0 vi_tstamp:4156521559 data:0x00000001<br />
kworker/5:2-275 [005] ...1 122.342588: rtcpu_vinotify_handle_msg: tstamp:4156522706 tag:ATOMP_FE channel:0x00 frame:0 vi_tstamp:4156521562 data:0x00000000<br />
<br />
CSIMUX_STREAM data bit field<br />
bit 31 FIFO_BADPKT_STREAM_HI<br />
bit 30 FIFO_LOF_STREAM_HI<br />
bit 29 FIFO_OVERFLOW_STREAM_HI<br />
bit 28 SPURIOUS_DATA_STREAM_HI<br />
bit 27 FIFO_BADPKT_STREAM_LO<br />
bit 26 FIFO_LOF_STREAM_LO<br />
bit 25 FIFO_OVERFLOW_STREAM_LO<br />
bit 24 SPURIOUS_DATA_STREAM_LO<br />
bit 23 FIFO_BADPKT_STREAM_5<br />
bit 22 FIFO_LOF_STREAM_5<br />
bit 21 FIFO_OVERFLOW_STREAM_5<br />
bit 20 SPURIOUS_DATA_STREAM_5<br />
bit 19 FIFO_BADPKT_STREAM_4<br />
bit 18 FIFO_LOF_STREAM_4<br />
bit 17 FIFO_OVERFLOW_STREAM_4<br />
bit 16 SPURIOUS_DATA_STREAM_4<br />
bit 15 FIFO_BADPKT_STREAM_3<br />
bit 14 FIFO_LOF_STREAM_3<br />
bit 13 FIFO_OVERFLOW_STREAM_3<br />
bit 12 SPURIOUS_DATA_STREAM_3<br />
bit 11 FIFO_BADPKT_STREAM_2<br />
bit 10 FIFO_LOF_STREAM_2<br />
bit 9 FIFO_OVERFLOW_STREAM_2<br />
bit 8 SPURIOUS_DATA_STREAM_2<br />
bit 7 FIFO_BADPKT_STREAM_1<br />
bit 6 FIFO_LOF_STREAM_1<br />
bit 5 FIFO_OVERFLOW_STREAM_1<br />
bit 4 SPURIOUS_DATA_STREAM_1<br />
bit 3 FIFO_BADPKT_STREAM_0<br />
bit 2 FIFO_LOF_STREAM_0<br />
bit 1 FIFO_OVERFLOW_STREAM_0<br />
bit 0 SPURIOUS_DATA_STREAM_0<br />
<br />
FIFO_OVERFLOW. It could be the pix_clk_hz in DT too small cause the ISP can't handle the input.<br />
kworker/5:3-1359 [005] ...1 253.671478: rtcpu_vinotify_handle_msg: tstamp:8279969890 tag:ISPBUF_FIFO_OVERFLOW channel:0x00 frame:12340 vi_tstamp:3985001981 data:0x00000000<br />
<br />
CHANSEL_NOMATCH<br />
bit 0 no_match<br />
bit 1-4 CTYPE<br />
bit 5-10 DTYPE<br />
<br />
CTYPE:<br />
FS = 0x8, FE = 0x1 <br />
LS = 0x4, LE = 0x2 <br />
LS_LE = 0x6, DATA = 0x9<br />
<br />
DTYPE:<br />
NvCsiDataType_Unspecified = 0,<br />
NvCsiDataType_YUV420_10 = 25,<br />
NvCsiDataType_LEG_YUV420_8 = 26,<br />
NvCsiDataType_YUV420_8 = 24,<br />
NvCsiDataType_YUV420CSPS_8 = 28,<br />
NvCsiDataType_YUV420CSPS_10 = 29,<br />
NvCsiDataType_YUV422_8 = 30,<br />
NvCsiDataType_YUV422_10 = 31,<br />
NvCsiDataType_RGB444 = 32,<br />
NvCsiDataType_RGB555 = 33,<br />
NvCsiDataType_RGB565 = 34,<br />
NvCsiDataType_RGB666 = 35,<br />
NvCsiDataType_RGB888 = 36,<br />
NvCsiDataType_RAW6 = 40,<br />
NvCsiDataType_RAW7 = 41,<br />
NvCsiDataType_RAW8 = 42,<br />
NvCsiDataType_RAW10 = 43,<br />
NvCsiDataType_RAW12 = 44,<br />
NvCsiDataType_RAW14 = 45,<br />
NvCsiDataType_RAW16 = 46,<br />
NvCsiDataType_RAW20 = 47,<br />
NvCsiDataType_User_1 = 48,<br />
NvCsiDataType_User_2 = 49,<br />
NvCsiDataType_User_3 = 50,<br />
NvCsiDataType_User_4 = 51,<br />
NvCsiDataType_User_5 = 52,<br />
NvCsiDataType_User_6 = 53,<br />
NvCsiDataType_User_7 = 54,<br />
NvCsiDataType_User_8 = 55,<br />
NvCsiDataType_Unknown = 64,<br />
<br />
Didn't receive any package from the MIPI bus. Make sure the sensor have output data to the MIPI bus <br />
kworker/5:2-2980 [005] ...1 4162.509492: rtos_queue_peek_from_isr_failed: tstamp:130384213094 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4162.509496: rtcpu_start: tstamp:130384214513<br />
kworker/5:2-2980 [005] ...1 4162.665213: rtos_queue_peek_from_isr_failed: tstamp:130389214019 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4162.821197: rtos_queue_peek_from_isr_failed: tstamp:130394214523 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4162.977226: rtos_queue_peek_from_isr_failed: tstamp:130399215027 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4163.133208: rtos_queue_peek_from_isr_failed: tstamp:130404215532 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4163.289207: rtos_queue_peek_from_isr_failed: tstamp:130409216052 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4163.445214: rtos_queue_peek_from_isr_failed: tstamp:130414216548 queue:0x0b4a3c58<br />
kworker/5:2-2980 [005] ...1 4163.601218: rtos_queue_peek_from_isr_failed: tstamp:130419217056 queue:0x0b4a3c58<br />
<br />
<br />
=== Analysis NVCSI register reporting ===<br />
Please access Jetson Download Center for [[https://developer.nvidia.com/embedded/downloads#?search=trm Technical Reference Manual]], <br />
you may see [NVCSI Registers] session for NVCSI register descriptions. <br><br />
for example, <br />
NVCSI_STREAM_0_PH_WC_0 / Status register on WC<br />
Bit Reset Description<br />
31:16 0x0 calc_wc: 16 bit WC computed over current packet (has to match with the WC in PH for a good packet)<br />
15:0 0x0 rx_wc: 16 bit WC from PH<br />
<br />
NVCSI_STREAM_0_PF_CRC_0 / Status register on packet data CRC<br />
Bit Reset Description<br />
31:16 0x0 calc_crc: 16 bit CRC computed over current packet (has to match with the CRC in PF for a good packet)<br />
15:0 0x0 rx_crc: 16 bit CRC from PF</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.1.x_patches&diff=570441
Jetson/L4T/r35.1.x patches
2022-11-24T07:50:20Z
<p>Jerry: </p>
<hr />
<div>'''flash'''<br />
<br><br />
[flash] Issue while flashing Xavier NX with initrd and linux kernel compiled, L4T 34.1.1<br />
https://forums.developer.nvidia.com/t/issue-while-flashing-xavier-nx-with-initrd-and-linux-kernel-compiled-l4t-34-1-1/217790/6<br />
<br />
[flash] APP clone failure with "orin_raw_new.img.raw is not mulple of 4096."<br />
https://forums.developer.nvidia.com/t/failed-to-sparse-the-raw-to-img-due-to-the-size-of-system-img-raw-is-not-mulple-of-4096/215526/25<br />
<br />
[Clone][MassFlash] steps to backup/restore a Jetson device using the backup image.<br />
https://forums.developer.nvidia.com/t/229129/8/<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.0.2/l4t-r35.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/226574/4/<br />
<br />
[driver] dtbo to enable ov5693 reference sensor board<br />
https://forums.developer.nvidia.com/t/215321/14<br />
<br />
[Argus] SensorTimestampTSC NULL on JetPack 5.0.2<br />
https://forums.developer.nvidia.com/t/232647/3<br />
<br />
[Orin][SCR] disable OEM firewall to access NVCSI registers<br />
https://forums.developer.nvidia.com/t/234321/11<br />
<br />
'''USB'''<br />
[type C] Jetpack-5.0.2 type C port fails to work after boot<br />
https://forums.developer.nvidia.com/t/jetpack-5-0-2-jetson-agx-orin-developer-kit-one-type-c-not-working/224158/37<br />
<br />
'''Multimedia'''<br />
[MMAPI] Fail to run encoder unit sample<br />
https://forums.developer.nvidia.com/t/229588/4<br />
<br />
[MMAPI] Could not setup cross-compile for Jetpack5.0.2<br />
https://forums.developer.nvidia.com/t/specify-the-target-rootfs-path-in-cross-compile-on-jetson-agx-xavier/234287<br />
<br />
'''Kernel'''<br />
[pthread_setschedparam]Shceduling real time priority linux thread on AGX ORIN failed<br />
https://forums.developer.nvidia.com/t/shceduling-real-time-priority-linux-thread-on-agx-orin-failed/227497/6<br />
<br />
'''Container'''<br />
[l4t-cuda:11.4.14-runtime]Could not resolve 'cuda-internal.nvidia.com'<br />
https://forums.developer.nvidia.com/t/unable-to-access-cuda-repo-from-cuda-l4t-docker-container/188459/24</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=570091
Jetson/L4T/r32.7.x patches
2022-10-26T03:13:43Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
[32.7.1][apt install] issue in ''apt install nvidia-jetpack''<br />
https://forums.developer.nvidia.com/t/229186/17<br />
<br />
[Jetson-IO] FATAL ERROR when there're multiple APP partitions mounted<br />
https://forums.developer.nvidia.com/t/231472/13/<br />
<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9<br />
<br />
[ffmpeg] fail to install ffmpeg package<br />
https://forums.developer.nvidia.com/t/229353/8<br />
<br />
[jetson_multimedia_api] NvDrmRenderer broken<br />
https://forums.developer.nvidia.com/t/221265/10<br />
<br />
[MMAPI] 07_video_convert sample result not match as expected<br />
https://forums.developer.nvidia.com/t/227623/14<br />
<br />
<br />
'''Camera'''<br />
[VI-2][Nano] fix image sequence numbers incrementing even if no image captured<br />
https://forums.developer.nvidia.com/t/221208/7/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=569836
Jetson/L4T/r32.7.x patches
2022-10-11T05:51:17Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9<br />
<br />
[ffmpeg] fail to install ffmpeg package<br />
https://forums.developer.nvidia.com/t/229353/8<br />
<br />
[jetson_multimedia_api] NvDrmRenderer broken<br />
https://forums.developer.nvidia.com/t/221265/10<br />
<br />
[MMAPI] 07_video_convert sample result not match as expected<br />
https://forums.developer.nvidia.com/t/227623/14<br />
<br />
<br />
'''Camera'''<br />
[VI-2][Nano] fix image sequence numbers incrementing even if no image captured<br />
https://forums.developer.nvidia.com/t/221208/7/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.1.x_patches&diff=569816
Jetson/L4T/r35.1.x patches
2022-10-07T03:19:37Z
<p>Jerry: </p>
<hr />
<div>'''flash'''<br />
<br><br />
[flash] Issue while flashing Xavier NX with initrd and linux kernel compiled, L4T 34.1.1<br />
https://forums.developer.nvidia.com/t/issue-while-flashing-xavier-nx-with-initrd-and-linux-kernel-compiled-l4t-34-1-1/217790/6<br />
[flash] APP clone failure with "orin_raw_new.img.raw is not mulple of 4096."<br />
https://forums.developer.nvidia.com/t/failed-to-sparse-the-raw-to-img-due-to-the-size-of-system-img-raw-is-not-mulple-of-4096/215526/25<br />
[Clone][MassFlash] steps to backup/restore a Jetson device using the backup image.<br />
https://forums.developer.nvidia.com/t/229129/8/<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.0.2/l4t-r35.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/226574/4/<br />
<br />
'''USB'''<br />
[type C] Jetpack-5.0.2 type C port fails to work after boot<br />
https://forums.developer.nvidia.com/t/jetpack-5-0-2-jetson-agx-orin-developer-kit-one-type-c-not-working/224158/37<br />
<br />
'''Multimedia'''<br />
[MMAPI] Fail to run encoder unit sample<br />
https://forums.developer.nvidia.com/t/229588/4<br />
<br />
'''Kernel'''<br />
[pthread_setschedparam]Shceduling real time priority linux thread on AGX ORIN failed<br />
https://forums.developer.nvidia.com/t/shceduling-real-time-priority-linux-thread-on-agx-orin-failed/227497/6</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r35.1.x_patches&diff=569006
Jetson/L4T/r35.1.x patches
2022-08-31T06:54:57Z
<p>Jerry: </p>
<hr />
<div>'''flash'''<br />
<br><br />
[flash] Issue while flashing Xavier NX with initrd and linux kernel compiled, L4T 34.1.1<br />
https://forums.developer.nvidia.com/t/issue-while-flashing-xavier-nx-with-initrd-and-linux-kernel-compiled-l4t-34-1-1/217790/6<br />
[flash] APP clone failure with "orin_raw_new.img.raw is not mulple of 4096."<br />
https://forums.developer.nvidia.com/t/failed-to-sparse-the-raw-to-img-due-to-the-size-of-system-img-raw-is-not-mulple-of-4096/215526/25<br />
<br />
'''Camera'''<br />
[RCE] JetPack-5.0.2/l4t-r35.1 camera firmware with debug flag enabled.<br />
https://forums.developer.nvidia.com/t/226574/4/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.7.x_patches&diff=568641
Jetson/L4T/r32.7.x patches
2022-08-04T02:12:05Z
<p>Jerry: </p>
<hr />
<div>'''bootloader'''<br />
<br><br />
[Cboot] Cboot in 32.7.2 fails to read extlinux.conf<br />
https://forums.developer.nvidia.com/t/cboot-in-32-7-2-fails-to-read-extlinux-conf/214017/15<br />
<br />
'''Misc'''<br />
<br><br />
[USB] New version of USB firmware: 60.13<br />
https://forums.developer.nvidia.com/t/216318/10<br />
<br />
[Source sync] Missing "tegra194-p2888-0008-e3366-1199.dts" in source sync kernel<br />
https://forums.developer.nvidia.com/t/l4t-32-7-1-device-tree-compilation-fails/209374/8<br />
<br />
[massflash] No device found when run nvmassflashgen on Xavier-industrial<br />
https://forums.developer.nvidia.com/t/220590/9<br />
<br />
'''Multimedia'''<br />
<br><br />
[ffmpeg] libavcodec.so: undefined reference to `v4l2_open’ <br />
https://forums.developer.nvidia.com/t/220546/9</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=560491
Jetson/L4T/r32.6.x patches
2021-12-20T02:15:17Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
[BUP] BUP update fails for NX FAB=200 modules.<br />
https://forums.developer.nvidia.com/t/invalid-device-spec-generated-during-bootloader-update/195651<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/<br />
<br />
[VI5] Disable ECC/CRC checking.<br />
https://forums.developer.nvidia.com/t/196126/9<br />
<br />
[Multi-camera] patch to fix "Invalid sensor placement is set" failure.<br />
https://forums.developer.nvidia.com/t/184902/10/<br />
<br />
'''Misc'''<br />
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path.<br />
https://forums.developer.nvidia.com/t/188599/8/<br />
[u-boot] revise offsets for TX2-NX to allows a disk-based DTB (via FDT in extlinux.conf) to be used with the current kernel image.<br />
https://forums.developer.nvidia.com/t/197775/10/<br />
<br />
[flash] fixes for --no-flash command not works on Xavier-NX <br />
https://forums.developer.nvidia.com/t/190164/<br />
[flash] Flash single partition with initrd flash<br />
https://forums.developer.nvidia.com/t/initrd-flash-single-partition-issue/197379/4 <br />
[source code] source_sync.sh fails to download AGXI source code<br />
https://forums.developer.nvidia.com/t/jetpack-4-6-production-release-with-l4t-32-6-1/185596/5<br />
<br />
[system] nvpmodel.conf PM_CONFIG to configure the default power mode<br />
https://forums.developer.nvidia.com/t/197985/13/<br />
<br />
'''Multimedia'''<br />
[gstreamer]Memory leak in UDP streaming<br />
https://forums.developer.nvidia.com/t/175198/11</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=560381
Jetson/L4T/r32.6.x patches
2021-12-16T03:40:08Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
[BUP] BUP update fails for NX FAB=200 modules.<br />
https://forums.developer.nvidia.com/t/invalid-device-spec-generated-during-bootloader-update/195651<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/<br />
<br />
[VI5] Disable ECC/CRC checking.<br />
https://forums.developer.nvidia.com/t/196126/9<br />
<br />
[Multi-camera] patch to fix "Invalid sensor placement is set" failure.<br />
https://forums.developer.nvidia.com/t/184902/10/<br />
<br />
'''Misc'''<br />
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path.<br />
https://forums.developer.nvidia.com/t/188599/8/<br />
[u-boot] revise offsets for TX2-NX to allows a disk-based DTB (via FDT in extlinux.conf) to be used with the current kernel image.<br />
https://forums.developer.nvidia.com/t/197775/10/<br />
<br />
[flash] fixes for --no-flash command not works on Xavier-NX <br />
https://forums.developer.nvidia.com/t/190164/<br />
[flash] Flash single partition with initrd flash<br />
https://forums.developer.nvidia.com/t/initrd-flash-single-partition-issue/197379/4 <br />
[source code] source_sync.sh fails to download AGXI source code<br />
https://forums.developer.nvidia.com/t/jetpack-4-6-production-release-with-l4t-32-6-1/185596/5<br />
<br />
'''Multimedia'''<br />
[gstreamer]Memory leak in UDP streaming<br />
https://forums.developer.nvidia.com/t/175198/11</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=555431
Jetson/L4T/r32.6.x patches
2021-09-27T08:25:46Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/<br />
<br />
[Multi-camera] patch to fix "Invalid sensor placement is set" failure.<br />
https://forums.developer.nvidia.com/t/184902/10/<br />
<br />
'''Misc'''<br />
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path.<br />
https://forums.developer.nvidia.com/t/188599/8/<br />
<br />
[flash] fixes for --no-flash command not works on Xavier-NX <br />
https://forums.developer.nvidia.com/t/190164/<br />
<br />
'''Multimedia'''<br />
[gstreamer]Memory leak in UDP streaming<br />
https://forums.developer.nvidia.com/t/175198/11</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=555346
Jetson/L4T/r32.6.x patches
2021-09-23T03:12:23Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/<br />
<br />
[Multi-camera] patch to fix "Invalid sensor placement is set" failure.<br />
https://forums.developer.nvidia.com/t/184902/10/<br />
<br />
'''Misc'''<br />
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path.<br />
https://forums.developer.nvidia.com/t/188599/8/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=555021
Jetson/L4T/r32.6.x patches
2021-09-16T02:38:47Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/<br />
<br />
'''Misc'''<br />
[u-boot] fixes for TX2-NX failed to boot-up by loading dtb via Jetson-IO or FDT path.<br />
https://forums.developer.nvidia.com/t/188599/8/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.6.x_patches&diff=554836
Jetson/L4T/r32.6.x patches
2021-09-07T07:58:56Z
<p>Jerry: </p>
<hr />
<div>'''OTA'''<br />
<br />
[Image based] Image based OTA got error when no ethernet is available<br />
https://forums.developer.nvidia.com/t/image-based-over-the-air-update-question/186110/19<br />
<br />
<br />
'''Camera'''<br />
[VI-5] V4L2 timeout leads to NULL pointer dereference in kernel<br />
https://forums.developer.nvidia.com/t/187824/12/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.5.x_patches&diff=552726
Jetson/L4T/r32.5.x patches
2021-06-16T08:50:20Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[MMAPI] resnet10_dynamic_batch.onnx is missing in the release<br />
https://forums.developer.nvidia.com/t/166694/5<br />
[gstreamer] fail to play h263 stream through nvgstplayer-1.0<br />
https://forums.developer.nvidia.com/t/176940/13<br />
'''Camera'''<br />
[camera] nvarguscamerasrc: fix public source compile failed<br />
https://forums.developer.nvidia.com/t/169745/3<br />
[camera] nvarguscamerasrc: some camera module failed launch multiple sensors.<br />
https://forums.developer.nvidia.com/t/170477/7<br />
[camera] 3rdparty application fails to open with USB camera <br />
https://forums.developer.nvidia.com/t/168303/19<br />
<br />
'''Security'''<br />
[Disk Encryption] a bug fix in decrypting buffer (customize eks.img)<br />
https://forums.developer.nvidia.com/t/177180/3/<br />
<br />
'''CAN'''<br />
[Xavier] NX CAN parent clock is changed from "osc" to "pllc", while AGX Xavier still has "osc" clock.<br />
https://forums.developer.nvidia.com/t/176255/17/<br />
<br />
'''Misc'''<br />
[flash] BUP generation fails on nano<br />
https://forums.developer.nvidia.com/t/how-to-update-uboot-and-kernel-in-the-running-time/170411/34<br />
[flash] flashcmd.txt cause A03 NX not able boot correctly<br />
https://forums.developer.nvidia.com/t/latest-a03-nx-som-failed-to-enter-desktop-after-flashing-with-flashcmd-txt/167652/14<br />
[performance] OC-throttling<br />
https://forums.developer.nvidia.com/t/system-throttled-due-to-over-current/167029/58<br />
[TX2 NX][EEPROM] Enable /dev/i2c-7 interface for EEPROM reading on TX2 NX.<br />
https://forums.developer.nvidia.com/t/180921/8/</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.5.x_patches&diff=551241
Jetson/L4T/r32.5.x patches
2021-05-10T02:46:38Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[MMAPI] resnet10_dynamic_batch.onnx is missing in the release<br />
https://forums.developer.nvidia.com/t/166694/5<br />
[gstreamer] fail to play h263 stream through nvgstplayer-1.0<br />
https://forums.developer.nvidia.com/t/176940/13<br />
'''Camera'''<br />
[camera] nvarguscamerasrc: fix public source compile failed<br />
https://forums.developer.nvidia.com/t/169745/3<br />
[camera] nvarguscamerasrc: some camera module failed launch multiple sensors.<br />
https://forums.developer.nvidia.com/t/170477/7<br />
[camera] 3rdparty application fails to open with USB camera <br />
https://forums.developer.nvidia.com/t/168303/19<br />
<br />
'''Security'''<br />
[Disk Encryption] a bug fix in decrypting buffer (customize eks.img)<br />
https://forums.developer.nvidia.com/t/177180/3/<br />
<br />
'''CAN'''<br />
[Xavier] NX CAN parent clock is changed from "osc" to "pllc", while AGX Xavier still has "osc" clock.<br />
https://forums.developer.nvidia.com/t/176255/17/<br />
<br />
'''Misc'''<br />
[flash] BUP generation fails on nano<br />
https://forums.developer.nvidia.com/t/how-to-update-uboot-and-kernel-in-the-running-time/170411/34<br />
[flash] flashcmd.txt cause A03 NX not able boot correctly<br />
https://forums.developer.nvidia.com/t/latest-a03-nx-som-failed-to-enter-desktop-after-flashing-with-flashcmd-txt/167652/14</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.5.x_patches&diff=551216
Jetson/L4T/r32.5.x patches
2021-05-07T09:32:14Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[MMAPI] resnet10_dynamic_batch.onnx is missing in the release<br />
https://forums.developer.nvidia.com/t/166694/5<br />
<br />
'''Camera'''<br />
[camera] nvarguscamerasrc: fix public source compile failed<br />
https://forums.developer.nvidia.com/t/169745/3<br />
[camera] nvarguscamerasrc: some camera module failed launch multiple sensors.<br />
https://forums.developer.nvidia.com/t/170477/7<br />
[camera] 3rdparty application fails to open with USB camera <br />
https://forums.developer.nvidia.com/t/168303/19<br />
<br />
'''Security'''<br />
[Disk Encryption] a bug fix in decrypting buffer (customize eks.img)<br />
https://forums.developer.nvidia.com/t/177180/3/<br />
<br />
'''Misc'''<br />
[flash] BUP generation fails on nano<br />
https://forums.developer.nvidia.com/t/how-to-update-uboot-and-kernel-in-the-running-time/170411/34<br />
[flash] flashcmd.txt cause A03 NX not able boot correctly<br />
https://forums.developer.nvidia.com/t/latest-a03-nx-som-failed-to-enter-desktop-after-flashing-with-flashcmd-txt/167652/14</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.3.x_patches&diff=551166
Jetson/L4T/r32.3.x patches
2021-04-30T02:02:29Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[GSTREAMER]streaming using jpegenc halts after a short delay<br />
https://forums.developer.nvidia.com/t/streaming-using-jpegenc-halts-after-a-short-delay/109924/5<br />
<br />
[GSTREAMER]Control-rate property(VBR/CBR) takes no effect<br />
https://forums.developer.nvidia.com/t/how-to-use-h-264-5-control-rate-with-gstreamer/119052/7<br />
<br />
[GSTREAMER]Memory leak in video/x-raw ! nvvidconv ! video/x-raw(memory:NVMM)<br />
https://forums.developer.nvidia.com/t/using-nvv4l2h264enc-encoder-memory-increases-when-releasing-pipeline-and-setting-up-a-new-one/82864/15<br />
<br />
[MMAPI]setQpRange error<br />
https://forums.developer.nvidia.com/t/setqprange-error/110464/7<br />
<br />
'''Misc'''<br />
[Nano/TX1] fix the Nano and TX1 APP partition cloning issue<br />
https://devtalk.nvidia.com/default/topic/1064479/jetson-nano/about-the-making-of-the-mirror-of-the-jetson-nano-module/post/5419408/#5419408<br />
<br />
[Nano A02(sdcard)] fix the dtb update failed.<br />
Modify the file at ../Linux_for_tegra/rootfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh as below and reflash or just copy it to Tegra and update the DTB again.<br />
diff --git a/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh b/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
index 921efc2..e383176 100755<br />
--- a/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
+++ b/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
@@ -1,5 +1,5 @@<br />
#!/bin/bash<br />
-# Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.<br />
+# Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved.<br />
#<br />
# NVIDIA CORPORATION and its licensors retain all intellectual property<br />
# and proprietary rights in and to this software, related documentation<br />
@@ -123,10 +123,10 @@ t210ref_update_qspi_check () {<br />
# need to update QSPI<br />
return 0<br />
elif (( "${sys_maj_rev}" == "${qspi_maj_rev}" )); then<br />
- if (( "${sys_min_rev}" >= "${qspi_min_rev}" )); then<br />
+ if (( "${sys_min_rev}" > "${qspi_min_rev}" )); then<br />
# sys_rel == qspi_rel<br />
# sys_maj_rev == qspi_maj_rev<br />
- # sys_min_rev >= qspi_min_rev<br />
+ # sys_min_rev > qspi_min_rev<br />
# need to update QSPI<br />
return 0<br />
else<br />
<br />
[Xavier] High cpu usage and cause performance drop<br />
https://forums.developer.nvidia.com/t/high-cpu-usage-when-idle/116766/<br />
<br />
'''USB'''<br />
<br />
[TX2] USB3 Hub causes flash error (custom carrier board)<br />
https://forums.developer.nvidia.com/t/deploying-with-l4t-flash-sh-breaks-on-my-carrier-board/82879/55 <br />
<br />
USB tethering does not work<br />
https://forums.developer.nvidia.com/t/android-usb-tethering-not-working/123202/28<br />
<br />
[TX2]Not enough host controller resources for new device state<br />
https://forums.developer.nvidia.com/t/xbox-360-controller-through-usb-hub-broken-in-jetpack-4-x-works-in-jetpack-3-x-not-enough-host-c/110621/2<br />
<br />
[Jetson Nano]Power control<br />
https://forums.developer.nvidia.com/t/usb-power-control/79037/7<br />
<br />
[Jetson Nano]Do USB2 compliance test on USB hub<br />
https://forums.developer.nvidia.com/t/jetson-nano-usb2-0-tuning-guide-bus-error-core-dumped/113139/4<br />
<br />
[USB 3 hang when USAP enabled device is connected]<br />
https://forums.developer.nvidia.com/t/usb3-hangs-when-connecting-a-uasp-enabled-portable-drive/77237/6<br />
<br />
'''Camera'''<br />
Segmentation fault when running nvarguscamerasrc pipeline<br />
TX1/Nano<br />
https://devtalk.nvidia.com/default/topic/1070455/jetson-nano/bug-nvarguscamerasrc-segmentation-fault/post/5429630/#5429630<br />
TX2/Xavier<br />
https://devtalk.nvidia.com/default/topic/1062196/jetson-tx2/nvargus-daemon-freeze-hang-on-pipeline-stop-on-r32-1/post/5429629/#5429629<br />
<br />
Add preferred stride cid control for stride adjustment. (v4l2-ctl --set-ctrl preferred_stride=256 preferred_stride=256)<br />
https://devtalk.nvidia.com/default/topic/1073152/jetson-tx2/video-for-linux-v4l-issue-for-onboard-ov5693/post/5436809/#5436809<br />
<br />
Modification to configure LP-bypass mode for continuous clock sensors, setting CSI CIL configure in case sensor start streaming early<br />
https://forums.developer.nvidia.com/t/165343/32<br />
<br />
Argus Error Resiliency <br />
https://forums.developer.nvidia.com/t/170086/18<br />
<br />
'''SPI'''<br />
TX1/Nano enable the SPI interface. Need modify the u-boot to remove the GPIO enable bit and modify the dts for the pinmux configure.<br />
https://forums.developer.nvidia.com/t/check-pinmux-on-spi0-1-on-jetson-nano/115534/20?u=shaneccc<br />
<br />
'''PCIe'''<br />
Enable PCIe C4 controller on Xavier<br />
https://forums.developer.nvidia.com/t/how-to-config-the-xavier-c4-lane-to-pcie-x2-function/124748<br />
Disable SMMU but get MC error<br />
https://forums.developer.nvidia.com/t/pcie-smmu-issue/67027/7</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.5.x_patches&diff=550596
Jetson/L4T/r32.5.x patches
2021-04-21T02:33:18Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[MMAPI] resnet10_dynamic_batch.onnx is missing in the release<br />
https://forums.developer.nvidia.com/t/166694/5<br />
<br />
'''Camera'''<br />
[camera] nvarguscamerasrc: fix public source compile failed<br />
https://forums.developer.nvidia.com/t/169745/3<br />
[camera] nvarguscamerasrc: some camera module failed launch multiple sensors.<br />
https://forums.developer.nvidia.com/t/170477/7<br />
[camera] 3rdparty application fails to open with USB camera <br />
https://forums.developer.nvidia.com/t/168303/19<br />
<br />
'''Misc'''<br />
[flash] BUP generation fails on nano<br />
https://forums.developer.nvidia.com/t/how-to-update-uboot-and-kernel-in-the-running-time/170411/34<br />
[flash] flashcmd.txt cause A03 NX not able boot correctly<br />
https://forums.developer.nvidia.com/t/latest-a03-nx-som-failed-to-enter-desktop-after-flashing-with-flashcmd-txt/167652/14</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.3.x_patches&diff=543096
Jetson/L4T/r32.3.x patches
2021-01-29T02:45:55Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[GSTREAMER]streaming using jpegenc halts after a short delay<br />
https://forums.developer.nvidia.com/t/streaming-using-jpegenc-halts-after-a-short-delay/109924/5<br />
<br />
[GSTREAMER]Control-rate property(VBR/CBR) takes no effect<br />
https://forums.developer.nvidia.com/t/how-to-use-h-264-5-control-rate-with-gstreamer/119052/7<br />
<br />
[GSTREAMER]Memory leak in video/x-raw ! nvvidconv ! video/x-raw(memory:NVMM)<br />
https://forums.developer.nvidia.com/t/using-nvv4l2h264enc-encoder-memory-increases-when-releasing-pipeline-and-setting-up-a-new-one/82864/15<br />
<br />
[MMAPI]setQpRange error<br />
https://forums.developer.nvidia.com/t/setqprange-error/110464/7<br />
<br />
'''Misc'''<br />
[Nano/TX1] fix the Nano and TX1 APP partition cloning issue<br />
https://devtalk.nvidia.com/default/topic/1064479/jetson-nano/about-the-making-of-the-mirror-of-the-jetson-nano-module/post/5419408/#5419408<br />
<br />
[Nano A02(sdcard)] fix the dtb update failed.<br />
Modify the file at ../Linux_for_tegra/rootfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh as below and reflash or just copy it to Tegra and update the DTB again.<br />
diff --git a/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh b/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
index 921efc2..e383176 100755<br />
--- a/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
+++ b/rfs/opt/nvidia/l4t-bootloader-config/nv-l4t-bootloader-config.sh<br />
@@ -1,5 +1,5 @@<br />
#!/bin/bash<br />
-# Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.<br />
+# Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved.<br />
#<br />
# NVIDIA CORPORATION and its licensors retain all intellectual property<br />
# and proprietary rights in and to this software, related documentation<br />
@@ -123,10 +123,10 @@ t210ref_update_qspi_check () {<br />
# need to update QSPI<br />
return 0<br />
elif (( "${sys_maj_rev}" == "${qspi_maj_rev}" )); then<br />
- if (( "${sys_min_rev}" >= "${qspi_min_rev}" )); then<br />
+ if (( "${sys_min_rev}" > "${qspi_min_rev}" )); then<br />
# sys_rel == qspi_rel<br />
# sys_maj_rev == qspi_maj_rev<br />
- # sys_min_rev >= qspi_min_rev<br />
+ # sys_min_rev > qspi_min_rev<br />
# need to update QSPI<br />
return 0<br />
else<br />
<br />
[Xavier] High cpu usage and cause performance drop<br />
https://forums.developer.nvidia.com/t/high-cpu-usage-when-idle/116766/<br />
<br />
'''USB'''<br />
<br />
[TX2] USB3 Hub causes flash error (custom carrier board)<br />
https://forums.developer.nvidia.com/t/deploying-with-l4t-flash-sh-breaks-on-my-carrier-board/82879/55 <br />
<br />
USB tethering does not work<br />
https://forums.developer.nvidia.com/t/android-usb-tethering-not-working/123202/28<br />
<br />
[TX2]Not enough host controller resources for new device state<br />
https://forums.developer.nvidia.com/t/xbox-360-controller-through-usb-hub-broken-in-jetpack-4-x-works-in-jetpack-3-x-not-enough-host-c/110621/2<br />
<br />
[Jetson Nano]Power control<br />
https://forums.developer.nvidia.com/t/usb-power-control/79037/7<br />
<br />
[Jetson Nano]Do USB2 compliance test on USB hub<br />
https://forums.developer.nvidia.com/t/jetson-nano-usb2-0-tuning-guide-bus-error-core-dumped/113139/4<br />
<br />
[USB 3 hang when USAP enabled device is connected]<br />
https://forums.developer.nvidia.com/t/usb3-hangs-when-connecting-a-uasp-enabled-portable-drive/77237/6<br />
<br />
'''Camera'''<br />
Segmentation fault when running nvarguscamerasrc pipeline<br />
TX1/Nano<br />
https://devtalk.nvidia.com/default/topic/1070455/jetson-nano/bug-nvarguscamerasrc-segmentation-fault/post/5429630/#5429630<br />
TX2/Xavier<br />
https://devtalk.nvidia.com/default/topic/1062196/jetson-tx2/nvargus-daemon-freeze-hang-on-pipeline-stop-on-r32-1/post/5429629/#5429629<br />
<br />
Add preferred stride cid control for stride adjustment. (v4l2-ctl --set-ctrl preferred_stride=256 preferred_stride=256)<br />
https://devtalk.nvidia.com/default/topic/1073152/jetson-tx2/video-for-linux-v4l-issue-for-onboard-ov5693/post/5436809/#5436809<br />
<br />
Modification to configure LP-bypass mode for continuous clock sensors, setting CSI CIL configure in case sensor start streaming early<br />
https://forums.developer.nvidia.com/t/165343/32<br />
'''SPI'''<br />
TX1/Nano enable the SPI interface. Need modify the u-boot to remove the GPIO enable bit and modify the dts for the pinmux configure.<br />
https://forums.developer.nvidia.com/t/check-pinmux-on-spi0-1-on-jetson-nano/115534/20?u=shaneccc<br />
<br />
'''PCIe'''<br />
Enable PCIe C4 controller on Xavier<br />
https://forums.developer.nvidia.com/t/how-to-config-the-xavier-c4-lane-to-pcie-x2-function/124748<br />
Disable SMMU but get MC error<br />
https://forums.developer.nvidia.com/t/pcie-smmu-issue/67027/7</div>
Jerry
https://elinux.org/index.php?title=Jetson/L4T/r32.4.x_patches&diff=534166
Jetson/L4T/r32.4.x patches
2020-10-15T08:31:49Z
<p>Jerry: </p>
<hr />
<div>'''Multimedia'''<br />
[GSTREAMER]Prebuilt lib for decoding YUV422 MJPEG through nvv4l2decoder<br />
https://forums.developer.nvidia.com/t/r32-4-3-issue-with-nvv4l2decoder/141278/3<br />
<br />
[MMAPI]Patch for multi-instance encoding<br />
https://forums.developer.nvidia.com/t/multimedia-api/142706/5<br />
<br />
[MMAPI]Video encode when Frame rate greater than 60<br />
https://forums.developer.nvidia.com/t/video-encode-when-frame-rate-greater-than-60/147287/7<br />
<br />
[Graphics] Tearing when dual display cases<br />
https://forums.developer.nvidia.com/t/need-help-fixing-vsync-tearing-with-dual-screen-opengl-hdmi-displayport/149024/6<br />
<br />
'''Camera'''<br />
[NX][Image Quality] nvodm pre-built binary which include some tuning parameters for Raspberry Pi v2 cameras (IMX219) as an example.<br />
https://forums.developer.nvidia.com/t/139727/28<br />
<br />
[nvarguscamerasrc] public release source code built the libgstnvarguscamera.so can not launch multiple cameras.<br />
https://forums.developer.nvidia.com/t/issue-with-multi-camera-capture-using-released-nvarguscamerasrc-code-for-jetpack-4-4/147837/15?u=shaneccc<br />
<br />
[argus_camera] fix user compile argus_camera application from the release sources causes segmentation fault (SIGSEGV) <br />
https://forums.developer.nvidia.com/t/141432/9<br />
<br />
[Xavier][RTCPU] debug RTCPU firmware for Jetson AGX Xavier on JetPack-4.3 and JetPack-4.4<br />
https://forums.developer.nvidia.com/t/156279/3/<br />
<br />
'''Kernel'''<br />
[NVS] IIO Kernel Changes Break Common IIO Drivers<br />
https://forums.developer.nvidia.com/t/nvidia-sensor-iio-kernel-changes-break-common-iio-drivers/125429/14<br />
<br />
'''Misc'''<br />
[sdcard] extend sdcard partition size<br />
https://forums.developer.nvidia.com/t/sd-card-size-loss-after-flashing/145493/4<br />
<br />
[TX2] Denver cores not working on TX2<br />
https://forums.developer.nvidia.com/t/cannot-enable-denver-cores-for-tx2-jetpack-4-4-dp/124708/40<br />
<br />
'''Tools'''<br />
[BackUp] Linux rsync utility to backup the root directory of a Jetson<br />
https://www.jetsonhacks.com/2020/07/21/lets-backup/<br />
<br />
'''USB'''<br />
[Xavier] USB3 Compliance failure<br />
https://forums.developer.nvidia.com/t/xavier-nx-usb3-compliance-test/144597/10<br />
<br />
'''Security'''<br />
[TX2] fixes to burn odm_lock variable, update tegraparser_v2 for adding OdmLock fuse.<br />
https://forums.developer.nvidia.com/t/120747/19<br />
<br />
[Nano] nvtboot*.bin binaries to correct odmfuse issue, which fix the issue of burning PKC Disable accidently. <br />
https://forums.developer.nvidia.com/t/144888/27</div>
Jerry