PPCBoot 1.1.6 (Feb 1 2006 - 15:41:27) CPU: IBM PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz) PCI async ext clock used, internal PCI arbiter enabled 16 kB I-Cache 8 kB D-Cache Board: ### No HW ID - assuming WALNUT405 I2C: ready DRAM: after i2cinit 0=0x80 1=0x8 2=0x4 3=0xc 4=0x8 5=0x1 6=0x40 7=0x0 8=0x1 9=0x70 10=0x54 11=0x0 12=0x80 13=0x10 14=0x0 15=0x1 16=0x8f 17=0x4 18=0x6 19=0x1 20=0x1 21=0x0 22=0xe 23=0x75 24=0x54 25=0x0 26=0x0 27=0xf 28=0xe 29=0xf 30=0x25 31=0x8 32=0x15 33=0x8 34=0x15 35=0x8 36=0x0 37=0x0 38=0x0 39=0x0 40=0x0 41=0x0 42=0x0 43=0x0 44=0x0 45=0x0 46=0x0 47=0x0 48=0x0 49=0x0 50=0x0 51=0x0 52=0x0 53=0x0 54=0x0 55=0x0 56=0x0 57=0x0 58=0x0 59=0x0 60=0x0 61=0x0 62=0x12 63=0x4e 64=0x2c 65=0xff 66=0xff 67=0xff 68=0xff 69=0xff 70=0xff 71=0xff 72=0x8 73=0x34 74=0x4c 75=0x53 76=0x44 77=0x54 78=0x34 79=0x36 80=0x34 81=0x41 82=0x47 83=0x2d 84=0x31 85=0x33 86=0x45 87=0x43 88=0x36 89=0x20 90=0x20 91=0x6 92=0x0 93=0x2 94=0x2 95=0x57 96=0x24 97=0x8d 98=0x90 99=0x0 100=0x0 101=0x0 102=0x0 103=0x0 104=0x0 105=0x0 106=0x0 107=0x0 108=0x0 109=0x0 110=0x0 111=0x0 112=0x0 113=0x0 114=0x0 115=0x0 116=0x0 117=0x0 118=0x0 119=0x0 120=0x0 121=0x0 122=0x0 123=0x0 124=0x0 125=0x0 126=0x64 127=0xaf sdram0_pmit 7c00000 sdram0_besr0 ffffffff sdram0_besr1 ffffffff sdram0_ecccfg 0 sdram0_eccesr ffffffff sdram0_rtr 4100000 sdram0_tr 824000 sdram0_b0cr 46001 sdram0_b1cr 1046001 sdram0_b2cr 0 sdram0_b3cr 0 sdram0_cfg 80e00000 32 MB test: xxx MB - ok FLASH: in get size done flash init 512 kB *** Warning - bad CRC, using default environment done env_relocate done pci init done devices init In: serial Out: serial Err: serial IDE: Bus 0: ............................................................** Timeout ** BEDBUG:ready Hit any key to stop autoboot: 3  2  1  0 => version PPCBoot 1.1.6 (Feb 1 2006 - 15:41:27) =>